journal article·2015-01

CuIn1−Al Se2 thin film solar cells with depth gradient composition prepared by selenization of evaporated metallic precursors

J. López-García, M. Placidi, X. Fontané, V. Izquierdo-Roca, M. Espindola, E. Saucedo, C. Guillén, J. Herrero, A. Pérez-Rodriguez

Publisher page

Abstract

Abstract Polycrystalline CuIn 1 − x Al x Se 2 (CIASe) thin films have been prepared on bare and Mo-coated substrates by selenization of evaporated Cu–In–Al precursors layers with 0≤ x ≤0.3 and thicknesses below 1.4 µm. X-ray diffraction measurements show several peaks around the (112) reflection corresponding to CIASe phases with different Al contents. This has been attributed to the existence of a depth compositional gradient in the layers with higher Al contents due to a diffusion of Al towards the back contact region. Raman scattering measurements directly performed with the excitation laser spot on both the front and back surfaces from absorbers that were previously mechanically removed from the Mo coated substrates confirm the existence of complex CIASe absorbers with graded Al content, which leads to a corresponding grading of the absorber bandgap. Enrichment of Al content at the back contact region is also accompanied by a decrease of the grain size as shown by cross-sectional Scanning Electron Microscopy (SEM). The best CIASe based solar cells have J sc , V oc , FF and efficiencies of 29.3 mA/cm 2 , 430 mV , 51.1% and 6.5%, respectively, for an overall Al/(In+Al) relative content x ~0.2. Comparison of these values with those from equivalent devices made without Al show a significant increase of the device efficiency. These data confirm the existence of a significant improvement of the device performance because of the increased absorber bandgap in the CIASe quaternary alloys.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. New world record efficiency for Cu(In,Ga)Se 2 thin-film solar cells beyond 20%10.1002/pip.1078 ↗
2. ZSW Press Release (18/2013) 〈http://www.zsw-bw.de/uploads/media/pi18-2013-ZSW-WorldrecordCIGS.pdf〉.
3. Electrical characterization of Cu(In,Ga)Se2 thin-film solar cells and the role of defects for the device performance10.1016/S0927-0248(00)00273-7 ↗
4. Shay · 1975
5. M.W. Haimbodi, E. Gourmelon, P.D. Paulson, R.W. Birkmire, W.N. Shafarman, Cu(InAl)Se-2 thin films and devices deposited by multisource evaporation, in: Proceedings of the 28th IEEE Photovoltaic Specialists Conference, 2000, pp. 454–457.10.1109/PVSC.2000.915868 ↗
6. Defects in copper indium aluminum diselenide films and their impact on photovoltaic device performance
7. CuIn1−xAlxSe2 thin films and solar cells10.1063/1.1476966 ↗
8. W.N. Shafarman, S. Marsillac, T. Minemoto, P.D. Paulson, R. Birkmire, Critical issues for Cu(InAl)Se2 thin film solar cells, in: Proceedings of the 3rd World Conference on Photovaltaic Energy Conversion, Vols a-c, 2003, pp. 2869–2873.
9. Effect of Al addition on the characteristics of Cu(In,Al)Se2 solar cells10.1016/j.jcrysgro.2008.09.135 ↗
10. Fabrication of Cu(In,Al)Se2 solar cells by three-stage evaporation process10.1117/12.731718 ↗
11. D. Dwyer, I. Repins, H. Efstathiadis, P. Haldar, Deposition of CuInAlSe2 films using co-sputtered precursors and selenization, In: Proceedings of the Conference Record IEEE Photovoltaic Specialists Conference, 2009, pp. 000247–000251.10.1109/PVSC.2009.5411687 ↗
12. I..Forbes, G. Zoppi, P. Nasikkar, R. Miles, Physical properties of CuAlInSe2 produced by selenisation of Cu/Al/In(Se) precursor layers, in: Proceedings of the 21st European Photovoltaic Solar Energy Conference, Dresden, Germany, 2006, pp. 1998.
13. CuIn1−xAlxSe2 thin films obtained by selenization of evaporated metallic precursor layers10.1016/j.tsf.2008.10.095 ↗
14. Selenization of co-sputtered CuInAl precursor films10.1016/j.solmat.2009.12.005 ↗
15. Wide-bandgap CuIn1−xAlxSe2 thin films deposited on transparent conducting oxides10.1016/j.solmat.2010.03.022 ↗
16. Cyclic voltammetric study and nucleation of electrodeposited Cu(In,Al)Se2 thin films with sodium dodecyl sulfate additive10.1149/2.029304jes ↗
17. Growth and characterization of electrodeposited Cu(In,Al)Se2 thin films10.1016/j.tsf.2011.03.126 ↗
18. Influence of substrate temperature on structural, optical, and electrical properties of flash evaporated CuIn0.81Al0.19Se2 thin films10.1016/j.matchemphys.2013.01.034 ↗
19. The preparation of Cu(In,Al)S2 films by direct reduction and sulfuration of the oxide precursors10.1016/j.scriptamat.2010.11.002 ↗
20. M. Takihara, T. Minemoto, Y. Wakisaka, S. Yamada, T. Takahashi, Photovoltaic characterization of Cu(lnGa)Se2 and Cu(lnAl)Se2 solar cells by photoassisted kelvin probe force microscopy, in: Proceedings of the Conference Record IEEE Photovoltaic Specialists Conference, Philadelphia, PA, 2009, pp. 000561–000563.10.1109/PVSC.2009.5411620 ↗
21. High-efficiency solar cells based on Cu(InAl)Se2 thin films10.1063/1.1499990 ↗
22. Effect of composition gradient in Cu(In,Al)Se2 solar cells10.1016/j.solmat.2008.11.007 ↗
23. Wide-bandgap CIAS thin-film photovoltaics with transparent back contacts for next generation single and multi-junction devices10.1016/j.mseb.2004.05.056 ↗
24. W.N. Shafarman, S. Marsillac, P.D. Paulson, M.W. Haimbodi, T. Minemoto, R. Birkmire, Material and device characterization of thin film Cu(InAl)Se-2 solar cells, in: Proceedings of the Conference Record 29th IEEE Photovoltaic Specialists Conference, 2002, pp. 519–522.10.1109/PVSC.2002.1190616 ↗
25. CuInSe2 formation by selenization of sequentially evaporated metallic layers10.1016/j.solmat.2004.05.019 ↗
26. Real-time investigations of selenization reactions in the system Cu–In–Al–Se10.1002/pssa.200669558 ↗
27. Characterisation of thin films CuIn1−xAlxSe2 prepared by selenisation of magnetron sputtered metallic precursors
28. Crystallographic properties and elemental migration in two-stage prepared CuIn1−xAlxSe2 thin films for photovoltaic applications10.1016/j.jallcom.2013.03.091 ↗
29. Study of the Al-grading effect in the crystallization of chalcopyrite CuIn1−xAlxSe2 thin films10.1016/j.matchemphys.2013.03.027 ↗
30. Infrared and Raman study of lattice vibrations of CuAlSe2 single crystals10.1016/S0022-3697(03)00215-4 ↗
31. Photoluminescence studies in CuAlSe2 epilayers grown by low-pressure metalorganic chemical-vapor-deposition10.1063/1.358990 ↗
32. Physico-chemical characterization of CuAlSe2 films obtained by reaction, induced by annealing, between Se vapour and Al/Cn/Al…Cu/Al/Cu thin films sequentially deposited10.1016/S0921-5107(96)02031-4 ↗
33. Formation of CuIn1−xAlxSe2 thin films studied by Raman scattering10.1016/j.tsf.2011.02.030 ↗
34. Disorder effects on the density of states of the Ii–Vi semiconductor alloys Hg0.5Cd0.5Te, Cd0.5Zn0.5Te, and Hg0.5Zn0.5Te10.1103/PhysRevB.43.1662 ↗
35. Process monitoring of chalcopyrite photovoltaic technologies by Raman spectroscopy: an application to low cost electrodeposition based processes10.1039/C0NJ00794C ↗
36. Raman-spectra of CuGaxIn1−xSe210.7567/JJAPS.32S3.436 ↗
37. In-depth resolved Raman scattering analysis of secondary phasesin Cu-poor CuInSe2 based thin films10.1063/1.3236770 ↗
38. Raman spectra of CuAlSe2 heteroepitaxial layers10.1063/1.359247 ↗
39. Raman scattering in mixed CuAl1−xGaxSe2 crystals10.1007/BF00662390 ↗
40. Diode quality factor determination for thin-film solar cells10.1016/0379-6787(89)90050-1 ↗
41. A stacked chalcopyrite thin-film tandem solar cell with 1.2V open-circuit voltage10.1002/pip.486 ↗
42. Beyond 11% efficiency: characteristics of state-of-the-art Cu2ZnSn(S,Se)4 solar cells10.1002/aenm.201200348 ↗
43. Physico-chemical characterisation of Cu(In,Al)Se2 thin film for solar cells obtained by a selenisation process10.1016/j.tsf.2004.11.039 ↗