Growth of Cu2ZnSnSe4 by cosputtering and reactive annealing atmosphere
Source abstract
Abstract
Abstract Cu 2 ZnSnSe 4 (CZTSe) thin films were synthesized by a two-step process involving co-sputtering metallic precursor followed by reactive annealing. Two different techniques of annealing were used, i.e. graphite box and three-zone furnace. Very important differences were observed between the two techniques in terms of Se diffusion through the precursor and reaction path leading to CZTSe formation. Thermodynamic analysis was used in order to explain the reaction mechanism and kinetics of CZTSe formation during the annealing step. The films exhibit large grains with high crystalline quality and solar cells with conversion efficiency of 7.1% were synthesized.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Compositional investigation of potassium doped Cu(In,Ga)Se2 solar cells with efficiencies up to 20.8%, Phys10.1002/pssr.201409040 ↗
2. CdTe solar cells at the threshold to 20% efficiency10.1109/JPHOTOV.2013.2278661 ↗
3. Critical materials strategy
4. Kësterite thin films for photovoltaics: a review10.1051/epjpv/2012008 ↗
5. Characterization of defects in 9.7% efficient Cu2ZnSnSe4-CdS-ZnO solar cells10.1063/1.4826448 ↗
6. Thin film solar cell with 8.4% power conversion efficiency using an earth-abundant Cu2ZnSnS4 absorber10.1002/pip.1174 ↗
7. W. Wang, M.T. Winkler, O. Gunawan, T. Gokmen, T.K. Todorov, Y. Zhu, D.B. Mitzi, Device characteristics of cztsse thin-film solar cells with 12.6% efficiency. Adv. Energy Mater. (2013).10.1002/aenm.201301465 ↗
8. 6% Efficiency Cu2ZnSnS4-based thin film solar cells using oxide precursors by open atmosphere type CVD10.1039/c2jm16454j ↗
9. A high efficiency electrodeposited Cu2ZnSnS4 solar cell10.1002/aenm.201100526 ↗
10. Earth abundant element Cu2Zn(Sn1−xGex)S4 nanocrystals for tunable band gap solar cells: 6.8% efficient device fabrication10.1021/cm2002836 ↗
11. A non-toxic, solution-processed. Earth abundant absorbing layer for thin-film solar cells10.1039/C1EE02314D ↗
12. Development of CZTS-based thin film solar cells10.1016/j.tsf.2008.11.002 ↗
13. Influence of precursor sulfur content on film formation and compositional changes in Cu2ZnSnS4 films and solar cells10.1016/j.solmat.2011.10.019 ↗
14. Fabrication of 7.2% efficient CZTSSe solar cells using CZTS nanocrystals10.1021/ja108427b ↗
15. Precursors׳ order effect on the properties of sulfurized Cu2ZnSnS4 thin films10.1088/0268-1242/24/10/105013 ↗
16. Cu2ZnSnS4 absorber layers obtained through sulphurization of metallic precursors: Graphite box versus sulphur flux10.1016/j.tsf.2012.11.080 ↗
17. Chemical insights into the instability of Cu2ZnSnS4 films during annealing10.1021/cm202379s ↗
18. Progress towards marketable Earth-abundant chalcogenide solar cells10.1016/j.tsf.2010.12.225 ↗
19. Cu2ZnSn(S,Se)4 solar cells processed by rapid thermal processing of stacked elemental layer precursors10.1016/j.tsf.2012.10.042 ↗
20. Electrochemical studies of one-step electrodeposition of Cu–Sn–Zn layers from aqueous electrolytes for photovoltaic applications10.1149/2.105310jes ↗
21. High temperature saturated vapour pressure of sulphur and the estimation of its critical quantities10.1016/0021-9614(74)90039-1 ↗
22. Cu(In,Ga)Se2 thin-film solar cells grown with cracked selenium10.1016/j.jcrysgro.2008.09.091 ↗
23. Coevaporation of Cu2ZnSnSe4 thin films10.1063/1.3483760 ↗
24. Kubaschewski · 1993
25. Preparation of Cu2ZnSnS4 thin films by sulfurization of co-electroplated Cu-Zn-Sn precursors10.1002/pssc.200881182 ↗
26. Morphological and structural characterization of Cu2ZnSnSe4 thin films grown by selenization of elemental precursor layers10.1016/j.tsf.2008.11.034 ↗
27. Optical characterization of Cu2ZnSnSe4 grown by thermal co-evaporation10.1016/j.tsf.2011.01.142 ↗
28. Determination of band gap energy (Eg) of Cu2ZnSnSe4 thin films: On the discrepancies of reported band gap values10.1063/1.3457172 ↗
29. Repins · Mat. Res. Soc. Symp. Proc · 2011 · 132410.1557/opl.2011.844 ↗
30. Scragg · ChemPhysChem · 2012 · 13 · 303510.1002/cphc.201200067 ↗
31. Shin · Appl. Phys. Lett. · 2013 · 102 · 09190710.1063/1.4794422 ↗
32. Investigation of the solid state reactions by time-resolved X-ray diffraction while crystallizing kesterite Cu2ZnSnSe4 thin films10.1016/j.tsf.2013.01.054 ↗
33. Predicted formation reactions for the solid-state syntheses of the semiconductor materials Cu2SnX3 and Cu2ZnSnX410.1016/j.tsf.2006.12.096 ↗
34. Low band gap liquid-processed CZTSe solar cell with 10.1% efficiency10.1039/c2ee00056c ↗
35. Loss mechanisms in hydrazine-processed Cu2ZnSn(Se,S)4 solar cells10.1063/1.3522884 ↗
36. Shin · Prog. Photovolt. · 2013 · 21 · 7210.1002/pip.1174 ↗
37. Electrodeposited Cu2ZnSnSe4 thin film solar cell with 7% power conversion efficiency10.1002/pip.2332 ↗
38. Optical designs that improve the efficiency of Cu2ZnSn(S,Se)410.1039/C3EE42541J ↗
39. The path towards a high-performance solution-processed kesterite solar cell10.1016/j.solmat.2010.11.028 ↗
40. Crystal and electronic band structure of Cu2ZnSnX4 (X=S and Se) photovoltaic absorbers: first-principles insights10.1063/1.3074499 ↗
41. Effect of zinc addition on properties of cadmium sulfide layer and performance of Cu(In,Ga)Se2 solar cell10.1016/j.tsf.2012.11.077 ↗