journal article·2012-09

Copper–indium–gallium–selenide (CIGS) solar cells with localized back contacts for achieving high performance

Marko Nerat

Publisher page

Abstract

Abstract Thin-film, polycrystalline, CIGS solar cells with localized and whole back contacts were modeled and simulated in two dimensions (2D) in order to investigate their potential for achieving high performance. The simulation results show that the short-circuit current density ( J sc ) of the CIGS cells with localized back contacts increases with a decreasing contacted area due to the decreased cumulative surface recombination rate at the back side of the CIGS layer. The conversion efficiency (η) of these thin-film, CIGS cells can be increased by 15% relatively compared to CIGS cells with traditional whole back contacts if the surface-recombination velocity of the electrons and the holes ( s n/p ) between two adjacent fingers of the back contact is zero and the density of the acceptor defect states ( N tA ) inside the CIGS layer is low ( N tA 13 cm −3 ). The polycrystalline properties of the CIGS were modeled by setting vertical grain boundaries (GBs) within the CIGS absorbent layer. The simulation results show that a valence-band offset ( VBO ) above 0.2 eV at the GBs increases the J sc , but it also significantly reduces the fill factor (FF) of the CIGS cells with localized back contacts. The results show that the efficiency of the CIGS cells with localized back contacts can be increased by 7% relatively if the density of the acceptor defect states at the GBs ( N tA,GB ) equals 10 17 cm −3 . In contrast, the efficiency of the CIGS cells with localized back contacts can be increased by only 1% relatively at the same N tA,GB if the VBO is 0.5 eV.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Silicon and Solar Cell Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Solar cell efficiency tables (version 36)10.1002/pip.1021 ↗
2. Detailed balance limit of p-n junction solar cells10.1063/1.1736034 ↗
3. Finite mobility effects on the radiative efficiency limit of pn-junction solar cells
4. High-efficiency PERL and PERT silicon solar cells on FZ and MCZ substrates10.1016/S0927-0248(00)00123-9 ↗
5. Optimization of the back contact in c-Si solar cells10.1016/j.sse.2009.04.030 ↗
6. M. Schöfthaler, U. Rau, W. Füssel, J.H. Werner, Optimization of the back contact geometry for high efficiency solar cells, in: Proceedings of the 23rd IEEE Photovoltaic Specialists Conference, 1993, pp. 315–320.10.1109/PVSC.1993.347164 ↗
7. Two-dimensional numerical optimization study of the rear contact geometry of high-efficiency silicon solar cells10.1063/1.355694 ↗
8. The impact of charged grain boundaries on thin-film solar cells and characterization
9. Numerical simulation of grain boundary effects in Cu(In,Ga)Se2 thin-film solar cells10.1016/j.tsf.2004.11.043 ↗
10. Numerical simulation of carrier collection and recombination at grain boundaries in Cu(In,Ga)Se2 solar cells
11. 2D device modelling and finite element simulations for thin-film solar cells10.1016/j.solmat.2008.11.058 ↗
12. laser ablation of metals10.1007/BF01538207 ↗
13. M. Chandrachood, A. Kumar, W.-F. Yau, Method for Etching a Molybdenum Layer Suitable for Photomask Fabrication, United State Patent Application Publication, US 2006/0166108 A1, 2006.
14. Y. Li, P.B. Laxton, J. Novak, D.M. Roundhill, Inks and Pastes for Solar Cell Fabrication, World Intellectual Property Organization (WIPO), WO2010/056826 A1, 2010.
15. Fundamentals and advantages of ultrafast micro-structuring of transparent materials10.1007/s00339-003-2143-3 ↗
16. Sub-micron patterning of solid materials with ultraviolet femtosecond pulses10.1007/s00339-004-2589-y ↗
17. Excimer laser etching of GaAs, AlxGa1−xAs and CuInSe2 in chlorine atmosphere10.1016/S0169-4332(97)00745-9 ↗
18. Laser scribing of polycrystalline thin films10.1016/S0143-8166(00)00061-0 ↗
19. Comparative investigation of solar cell thin film processing using nanosecond and femtosecond lasers10.1088/0022-3727/39/3/005 ↗
20. Scribing of thin-film solar cells with picosecond laser pulses10.1016/j.phpro.2011.03.116 ↗
21. Selective ablation of thin Mo and TCO films with femtosecond laser pulses for structuring thin film solar cells10.1007/s00339-007-4158-7 ↗
22. Simulation study of the effects of grain shape and size on the performance of Cu(In,Ga)Se2 solar cells
23. Theory of flow of electrons and holes in germanium and other semiconductors10.1002/j.1538-7305.1950.tb03653.x ↗
24. M. Gloeckler, Device Physics of Cu(In,Ga)Se2 Thin-Film Solar Cells, Ph.D. Thesis, Colorado State University, Fort Collins, Colorado, USA, 2005.
25. Recombination centers in the Cu(In,Ga)Se2-based photovoltaic devices10.1016/S0022-3697(03)00092-1 ↗
26. Electronic properties of Cu(In,Ga)Se2 heterojunction solar cells—recent achievements, current understanding, and future challenges10.1007/s003390050984 ↗
27. Wide gap chalcopyrites: material properties and solar cells10.1016/S0040-6090(01)01525-5 ↗
28. Compositional trends of defect energies, band alignments, and recombination mechanisms in the Cu(In,Ga)(Se,S)2 alloy system10.1016/S0040-6090(03)00225-6 ↗
29. Electron properties of n- and p-CuInSe210.1016/j.solener.2007.07.004 ↗
30. Surface passivation of Cu(In,Ga)Se2 using atomic layer deposited Al2O3
31. Analysis of light scattering in amorphous Si:H solar cells by a one-dimensional semi-coherent optical model10.1002/pip.460 ↗
32. Grain boundaries in Cu(In,Ga)(Se,S)2 thin-film solar cells10.1007/s00339-008-4978-0 ↗
33. Kelvin probe force microscopy for the nano scale characterization of chalcopyrite solar cell materials and devices10.1016/S0040-6090(03)00267-0 ↗
34. Direct observation of copper depletion and potential changes at copper indium gallium diselenide grain boundaries
35. A simulation study of the effect of the diverse valence-band offset and the electronic activity at the grain boundaries on the performance of polycrystalline Cu(In,Ga)Se2 solar cells10.1016/j.tsf.2010.12.100 ↗
36. Compositionally induced valence-band offset at the grain boundary of polycrystalline chalcopyrites creates a hole barrier