Novel EPE co-extruded encapsulating films with UV down-conversion power gain effect for highly efficient solar cells
Source abstract
Abstract
How to maintain or even improve the performance of solar cells under the influence of high temperature, high humidity and intense ultraviolet light has always been a challenging research topic. Here, we propose a novel and effective solution by combining the benefits of EVA (ethylene vinyl acetate), POE (polyolefin) and UV down-conversion (UV-DC) fluorescent nanomaterial (Sr 2-xMgSi 2O 7-x: Eu 2+, Dy 3+ ) to construct the first commercially available UV-DC EPE co-extruded encapsulating film with a three-layer composite structure. On the one hand, the UV-DC EPE incorporates the high adhesive strength of EVA and the strong weather resistance of POE. On the other hand, the UV-DC EPE can also convert the UV irradiation, inefficient for power generation and easily cause damage to solar cells, into visible light range with high quantum efficiencies. Therefore, we discover that the UV-DC EPE not only shows higher stability than other encapsulation films under potential-induced degradation (PID), pressure cooker test (PCT), UV and natural sunlight aging tests, but also enhances the power generation efficiencies by 0.3% and 2.3% compared with the UV-transmitting and the UV-filtering EPE films, respectively. The progress in this work breaks the stereotypical definition of encapsulation that only slows down attenuation, but integrates the advantages of power gain effect, high stability, and low cost into the novel encapsulation material and technology, which is expected to be promoted and industrialized in the near future.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicone and Siloxane Chemistry · Perovskite Materials and Applications · Surface Modification and Superhydrophobicity
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Quantifying the cost savings of global solar photovoltaic supply chains10.1038/s41586-022-05316-6 ↗
2. A global inventory of photovoltaic solar energy generating units10.1038/s41586-021-03957-7 ↗
3. Jones · 2022
4. Cuprous oxide single-crystal film assisted highly efficient solar hydrogen production on large ships for long-term energy storage and zero-emission power generation10.1016/j.jpowsour.2022.231133 ↗
5. Efficient and stable perovskite‐based photocathode for photoelectrochemical hydrogen production
6. Flexible cupric oxide photocathode with enhanced stability for renewable hydrogen energy production from solar water splitting10.1039/C9RA00865A ↗
7. Solar energy: rock on
8. Masson · 2022
9. A new concept and strategy for photovoltaic and thermoelectric power generation based on anisotropic crystal facet unit
10. Technology and market perspective for indoor photovoltaic cells10.1016/j.joule.2019.03.026 ↗
11. Optimization design of uncertain parameters for improving the stability of photovoltaic system10.1016/j.jpowsour.2021.230959 ↗
12. Defects and performance of Si PV modules in the field – an analysis10.1039/D2EE00109H ↗
13. Intrinsically stable organic solar cells under high-intensity illumination10.1038/s41586-019-1544-1 ↗
14. Preparation strategies of p‑type cuprous oxide and its solar energy conversion performance10.1021/acs.energyfuels.1c02777 ↗
15. Stability enhancement of perovskite solar cells via multi-point ultraviolet-curing-based protection10.1016/j.jpowsour.2021.230906 ↗
16. A hydrophobic polymer stabilized p-Cu2O nanocrystal photocathode for highly efficient solar water splitting10.1039/C9TA04822G ↗
17. Enhanced photovoltaic performance and stability of carbon counter electrode based perovskite solar cells encapsulated by PDMS10.1039/C6TA02851A ↗
18. Application of SiOxNy films in industrial bifacial PERC solar cells10.1016/j.solmat.2021.111199 ↗
19. Commercial carbon nanotube as rear contacts for industrial p-type silicon solar cells with an efficiency exceeding 23%10.1016/j.carbon.2022.11.020 ↗
20. Controllably grown single-crystal films as flexoelectric nanogenerators for continuous direct current output10.1038/s41528-022-00223-2 ↗
21. Towards an industrial in-line solution for efficient post-treatment of silicon heterojunction solar cells10.1016/j.solmat.2022.111867 ↗
22. Performance of heterojunction solar cells with different intrinsic a-Si:H thin layers deposited by RF- and VHF-PECVD10.1007/s10854-021-06991-3 ↗
23. Passivating contacts for crystalline silicon solar cells10.1038/s41560-019-0463-6 ↗
24. Encapsulation of printable mesoscopic perovskite solar cells enables high temperature and long‐term outdoor stability10.1002/adfm.201809129 ↗
25. Sustainable plasma polymer encapsulation materials for organic solar cells10.1039/D1TA10608B ↗
26. Performance improvement of a p-Cu2O nanocrystal photocathode with an ultra-thin silver protective layer10.1039/C9CC04994K ↗
27. Suppressed oxidation in organic photovoltaics via hydrogen-bonded polyurethane acrylate resin encapsulation10.1016/j.jpowsour.2022.231206 ↗
28. Durability and performance of encapsulant films for bifacial heterojunction photovoltaic modules10.3390/polym14051052 ↗
29. Light-induced performance of SHJ solar modules under 2000 h illumination10.1016/j.solmat.2021.111459 ↗
30. Polyolefin elastomer as the anode interfacial layer for improved mechanical and air stabilities in nonfullerene solar cells10.1021/acsami.9b18095 ↗
31. Chemical and mechanical interfacial degradation in bifacial glass/glass and glass/transparent backsheet photovoltaic modules10.1002/pip.3602 ↗
32. Properties and degradation behaviour of polyolefin encapsulants for photovoltaic modules10.1002/pip.3323 ↗
33. Effect of organo-smectite clays on the mechanical properties and thermal stability of EVA nanocomposites
34. Quick test for reversible and irreversible PID of bifacial PERC solar cells10.1016/j.solmat.2020.110755 ↗
35. The study on anti-PID performance of high efficiency bifacial cell module10.1088/1757-899X/556/1/012033 ↗
36. Potential induced degradation of n-type bifacial silicon solar cells: an investigation based on electrical and optical measurements10.1016/j.solmat.2017.04.007 ↗
37. Enhanced long afterglow luminescence of Sr2MgSi2O7: Eu2+, Dy3+ by NH4Cl10.1016/j.inoche.2022.110151 ↗
38. Enhancement of the persistent luminescence of Sr2MgSi2O7: Eu2+, Dy3+ by Cu nanoparticles10.1016/j.jlumin.2019.116965 ↗
39. New viewpoint about the effects of boric acid on luminous intensity of Sr2MgSi2O7: Eu, Dy
40. In-depth investigation of an In-Ni-Ta-O-N photocatalyst for overall water splitting under sunlight10.1016/j.jcat.2014.10.002 ↗
41. Photocatalytic overall water splitting under visible light over an In-Ni-Ta-O-N solid solution without an additional cocatalyst10.1016/j.ijhydene.2013.10.092 ↗