Macroencapsulated carbonate eutectic salt phase change material with high durability for high temperature heat storage
Source abstract
Abstract
Carbonate eutectic salt is a kind of promising phase change material (PCM) for high temperature thermal storage application, which unfortunately constrained by its significant corrosiveness and low thermal conductivity. The encapsulation of salt PCM with stable inorganic shell to make capsules of millimeter to centimeter size can solve these problems, which is unfortunately technologically difficult to be prepared. In this work, a double shell strategy was proposed to coat the salt macrospheres with inner expanded graphite (EG) layer and outer ceramic kaolin layer. All raw materials were powders, which were shaped to spheres and capsules with the help of organic binder, pressed by isostatic pressing and finally sintered at high temperature for capsule formation. In a comparative case, the single kaolin shell coated capsules leaked when they were heated over the melting point of salt since that the relatively porous kaolin shell could be infiltrated with liquid salt because of their good wettability. However, the double shells coated capsules could prevent the leakage of salt since that the inner EG layer was repellent to liquid salt. The double shells coated macrocapsules showed good stability and high durability for long-term use, as confirmed by a cycling test over 300 cycles. The eutectic salt (Na 2CO 3/Li 2CO 3 = 57/43 in weight) core PCM presented a high latent heat of 313 J/g and melting point of around 498 °C. The macrocapsules with a size of [email protected]@3 showed a high heat storage capability of 380 J/g in a temperature range of 400–600 °C. The macroencapulated carbonate eutectic salt with good heat storage capability and good thermal cycling durability can be extensively used for high-temperature heat storage applications in solar thermal power plant and industrial waste heat recovery.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Phase Change Materials Research · Adsorption and Cooling Systems · Solar Thermal and Photovoltaic Systems
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Addressing energy storage needs at lower cost via on-site thermal energy storage in buildings10.1039/D1EE01992A ↗
2. Molecular dynamics simulation of thermophysical properties of NaCl-KCl phase change materials applied to concentrating solar power10.1016/j.est.2022.104707 ↗
3. Phase change material-based thermal energy storage
4. Recent developments in phase change materials for energy storage applications: a review10.1016/j.ijheatmasstransfer.2018.09.126 ↗
5. Enhanced thermal performance of phase-change materials supported by mesoporous silica modified with polydopamine/nano-metal particles for thermal energy storage10.1016/j.renene.2021.06.021 ↗
6. Review on the temperature-dependent thermophysical properties of liquid paraffins and composite phase change materials with metallic porous structures, Mater
7. Preparation and structure-properties of crosslinking organic montmorillonite/polyurethane as solid-solid phase change materials for thermal energy storage10.1016/j.solmat.2022.111831 ↗
8. High enthalpy efficiency lignin-polyimide porous hybrid aerogel composite phase change material with flame retardancy for superior solar-to-thermal energy conversion and storage10.1016/j.solmat.2022.112036 ↗
9. High-performance thermally conductive phase change composites by large-size oriented graphite sheets for scalable thermal energy harvesting10.1002/adma.201905099 ↗
10. Nano-Ag modified bio-based loofah foam/polyethylene glycol composite phase change materials with higher photo-thermal conversion efficiency and thermal conductivity10.1016/j.est.2022.105238 ↗
11. Enhanced thermal performance of phase change materials supported by hierarchical porous carbon modified with polydopamine/nano-Ag for thermal energy storage10.1016/j.est.2022.104129 ↗
12. Enhanced thermal performance of phase-change material supported by nano-Ag coated eggplant-based biological porous carbon10.1016/j.est.2021.103174 ↗
13. Lipophilic modified hierarchical multiporous rGO aerogel-based organic phase change materials for effective thermal energy storage10.1021/acsami.2c17041 ↗
14. Experimental study on supercooling and heat transfer performance during the solidification of sodium acetate trihydrate composites10.1016/j.solmat.2022.112098 ↗
15. Macro-encapsulated 3D phase change material: Na2S2O3·5H2O-NaOAc·3H2O/carbonized Melamine sponge composite as core and SiC modified polyurethane thin-layer as shell10.1016/j.compscitech.2021.108981 ↗
16. Strong, thermo-reversible salogels with boronate ester bonds as thermal energy storage materials10.1039/D2TA06183J ↗
17. Supercooling suppression of metal-based microencapsulated phase change material (MEPCM) for thermal energy storage10.1016/j.cej.2022.137020 ↗
18. Ball-milled Al-Sn alloy as composite phase change material
19. Effect of the fabrication process on the thermophysical properties of Ca(NO3)2–NaNO3/expanded graphite phase change material composites10.1016/j.solmat.2019.110005 ↗
20. Medium- and high-temperature latent heat thermal energy storage: material database, system review, and corrosivity assessment10.1002/er.4216 ↗
21. Microencapsulation of high temperature metallic phase change materials with SiCN shell10.1016/j.cej.2022.135054 ↗
22. A review of high temperature (≥ 500 C) latent heat thermal energy storage10.1016/j.rser.2022.112293 ↗
23. A new strontium based reactive carbonate composite for thermochemical energy storage10.1039/D1TA04363C ↗
24. Comparative review of different influence factors on molten salt corrosion characteristics for thermal energy storage10.1016/j.solmat.2021.111485 ↗
25. A critical review of eutectic salt property prediction for latent heat energy storage systems10.1016/j.rser.2016.11.274 ↗
26. Review on thermal performances and applications of thermal energy storage systems with inorganic phase change materials10.1016/j.energy.2018.09.128 ↗
27. Novel MgCl2-KCl/expanded graphite/graphite paper composite phase change blocks with high thermal conductivity and large latent heat10.1016/j.solener.2017.10.083 ↗
28. Thermal property measurement and heat storage analysis of LiNO3/KCl - expanded graphite composite phase change material10.1016/j.apenergy.2013.11.019 ↗
29. Carbonate salt based composite phase change materials for medium and high temperature thermal energy storage: a microstructural study10.1016/j.solmat.2019.03.035 ↗
30. Carbonate-salt-based composite materials for medium- and high-temperature thermal energy storage10.1016/j.partic.2013.09.002 ↗
31. Metal-based phase change material (PCM) microcapsules/nanocapsules: fabrication, thermophysical characterization and application10.1016/j.cej.2022.135559 ↗
32. Preparation and properties of novel ceramic composites based on microencapsulated phase change materials (MEPCMs) with high thermal stability10.1016/j.ceramint.2021.05.135 ↗
33. Macroencapsulation and characterization of phase change materials for latent heat thermal energy storage systems10.1016/j.apenergy.2015.04.086 ↗
34. Experimental and numerical study on the performance of a new high-temperature packed-bed thermal energy storage system with macroencapsulation of molten salt phase change material10.1016/j.apenergy.2018.03.156 ↗
35. Corrosion resistance of ceramic materials in pyrochemical reprocessing condition by using molten salt for spent nuclear oxide fuel10.1016/j.jpcs.2004.06.046 ↗
36. Hot corrosion of Al2O3 and SiC ceramics by KCl-NaCl molten salt10.2109/jcersj2.123.685 ↗
37. Preparation and thermal energy storage properties of paraffin/expanded graphite composite phase change material10.1016/j.apenergy.2011.10.014 ↗
38. Development of capric acid-stearic acid-palmitic acid low-eutectic phase change material with expanded graphite for thermal energy storage10.1016/j.conbuildmat.2022.126309 ↗
39. A study of LiNO3-NaCl/EG composite PCM for latent heat storage10.1007/s10765-021-02908-8 ↗
40. Preparation and performance improvement of chlorides/MgO ceramics shape-stabilized phase change materials with expanded graphite for thermal energy storage system10.1016/j.apenergy.2022.119116 ↗
41. Wettability of eutectic NaLiCO3 salt on magnesium oxide substrates at 778 K10.1016/j.apsusc.2018.02.082 ↗
42. MgO based composite phase change materials for thermal energy storage: the effects of MgO particle density and size on microstructural characteristics as well as thermophysical and mechanical properties10.1016/j.apenergy.2019.04.094 ↗
43. Composite materials for thermal energy storage: enhancing performance through microstructures10.1002/cssc.201300878 ↗
44. Specific heat capacity, viscosity, and thermal stability of carbonate-based molten salt nanofluids10.1016/j.est.2021.103192 ↗