journal article·2023-06

Electrospinning-assisted radiative cooling composite films

Heegyeom Jeon, Jeong Ho Na, Yong Seok Kim, Seung-Keun Park, Youngjae Yoo

Publisher page

Abstract

The rapid increase in annual cooling energy demand has a significant adverse impact on global warming. Recent research on passive radiative cooling using various materials to reduce energy use for cooling has been reported. Most previous studies focused on solar reflection and mid-infrared (IR) emission based on photonic crystal materials. In this study, wave-selective emitter coolers in the atmospheric window range were fabricated using glass bubbles (GBu) and barium sulfate (BaSO 4 ) in polydimethylsiloxane (PDMS). Then, polyacrylonitrile (PAN) nanofibers were electrospun on the prepared coolers. The optical properties and cooling power according to the ratio of GBu and BaSO 4 contained in the cooler and PAN electrospinning conditions were analyzed. Compared with the PDMS/GBu and BaSO 4 cooler, the cooler with the added electrospinning layer exhibited higher reflectivity and cooling power. This study improves the performance of previously studied passive radiative cooling.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Thermal Radiation and Cooling Technologies · Urban Heat Island Mitigation · Building Energy and Comfort Optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. Fossil fuel energy consumption in European countries10.1016/j.egypro.2018.10.050 ↗
2. The radiative cooling of selective surfaces10.1016/0038-092X(75)90062-6 ↗
3. Progress of passive daytime radiative cooling technologies towards commercial applications10.1016/j.partic.2021.10.004 ↗
4. Passive radiative cooling below ambient air temperature under direct sunlight10.1038/nature13883 ↗
5. Bioinspired ‘skin’ with cooperative thermo-optical effect for daytime radiative cooling10.1021/acsami.0c03897 ↗
6. Ultrahigh emissivity of grating-patterned PDMS film from 8 to 13 μ m wavelength regime10.1063/5.0017838 ↗
7. Scalable flexible hybrid membranes with photonic structures for daytime radiative cooling10.1002/adfm.201907562 ↗
8. Hierarchically porous polymer coatings for highly efficient passive daytime radiative cooling10.1126/science.aat9513 ↗
9. Sub-ambient radiative cooling under tropical climate using highly reflective polymeric coating10.1016/j.solmat.2022.111723 ↗
10. Nanocomposite coatings with plasmonic structural colors for subambient daytime radiative cooling10.1016/j.solener.2022.05.023 ↗
11. Cost effective 24-h radiative cooler with multiphase interface enhanced solar scattering and thermal emission10.1016/j.mtcomm.2022.103398 ↗
12. A dual-layer polymer-based film for all-day sub-ambient radiative sky cooling
13. Cool white polymer coatings based on glass bubbles for buildings10.1038/s41598-020-63027-2 ↗
14. BaSO 4 and Fe 2 O 3 filled polydimethylsiloxane elastomer nanocomposite as X-ray radiation resistant material
15. Scalable-manufactured randomized glass-polymer hybrid metamaterial for daytime radiative cooling10.1126/science.aai7899 ↗
16. Polymer coating with gradient‐dispersed dielectric nanoparticles for enhanced daytime radiative cooling10.1002/eom2.12169 ↗
17. Subambient cooling of water: toward real-world applications of daytime radiative cooling10.1016/j.joule.2018.10.006 ↗
18. Mechanically robust and spectrally selective convection shield for daytime subambient radiative cooling10.1021/acsami.0c21204 ↗
19. Electronic and phononic origins of BaSO4 as an ultra-efficient radiative cooling paint pigment10.1016/j.mtphys.2022.100658 ↗
20. Ultrawhite BaSO4Paints and films for remarkable daytime subambient radiative cooling10.1021/acsami.1c02368 ↗
21. Electrospinning: a fascinating fiber fabrication technique10.1016/j.biotechadv.2010.01.004 ↗
22. Electrospun MOF-based ZnSe nanocrystals confined in N-doped mesoporous carbon fibers as anode materials for potassium ion batteries with long-term cycling stability
23. Experimental and theoretical study on the electrospinning nanoporous fibers process10.1016/j.matchemphys.2015.12.054 ↗
24. Selectively enhancing solar scattering for direct radiative cooling through control of polymer nanofiber morphology10.1021/acsami.0c09374 ↗
25. Tailoring body surface infrared radiation behavior through colored nanofibers for efficient passive radiative heating textiles10.1016/j.cej.2021.133093 ↗
26. Single electrode piezoelectric nanogenerator for intelligent passive daytime radiative cooling
27. Efficient daytime radiative cooling cover sheet with dual-modal optical properties10.1002/adom.202201771 ↗
28. Thermal conductivity of polyacrylonitrile nanofibre web in various nanofibre diameters and surface densities10.1049/mnl.2012.0375 ↗
29. Thermal conductivity of electrospun polyethylene nanofibers10.1039/C5NR04995D ↗
30. Radiative cooling computed for model atmospheres10.1364/AO.21.004381 ↗
31. Radiative cooling nanofabric for personal thermal management10.1021/acsami.2c05115 ↗