journal article·2023-01

Polyethylene glycol/polyvinyl butyral/graphene nanoplates as composite phase-change materials with high thermal conductivity

Changlu Xu, Wenze Wang, Huan Zhang, Guiyin Fang

Publisher page

Abstract

Composite phase-change materials (CPM) were prepared using polyethylene glycol (PG), polyvinyl butyral (PB) and graphene nanoplates (GP). PG is a phase-change material (PM), PB is used as supporting material, and GP is an additive with high thermal conductivity . The results of Fourier transformation infrared spectroscope (FT–IR) and X–ray diffractometer (XRD) show that there is no chemical reaction among the PB, PG and GP. The CPM was observed with a laminar structure by scanning electronic microscope (SEM). Differential scanning calorimeter (DSC), thermogravimetric analyzer (TGA) and transient hot–wire conductivity meter were used to measure thermal performance of the CPM. The experimental results indicate that CPM3 has best thermal performance. The CPM3 containing 5 wt% GP has thermal conductivity of 2.04 W/(m⋅K), 8.87 times that of pure PG. The melting temperature and latent heat of the CPM3 are 58.75 °C and 147.81 J/g. Thermal cycling experiments demonstrate the CPM3 possesses good thermal reliability. Therefore, it has application prospects in solar energy utilization, building energy conservation and waste heat recovery.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Phase Change Materials Research · Solar Thermal and Photovoltaic Systems · Adsorption and Cooling Systems

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. Encapsulation of inorganic phase change thermal storage materials and its effect on thermophysical properties: a review10.1016/j.solmat.2022.111747 ↗
2. Enhancement of latent heat energy storage system using nanomaterials for different applications: a review10.1016/j.matpr.2020.01.126 ↗
3. Heat transfer enhancement of latent heat thermal energy storage in solar heating system: a state–ofthe–art review10.1016/j.est.2021.103727 ↗
4. Effects of carbon-based fillers on thermal properties of fatty acids and their eutectics as phase change materials used for thermal energy storage: a review10.1016/j.est.2021.102329 ↗
5. Review on cold thermal energy storage applied to refrigeration systems using phase change materials
6. Strategies for phase change material application in latent heat thermal energy storage enhancement: status and prospect10.1016/j.est.2022.105179 ↗
7. Review on thermal conductivity improvement of phase change materials with enhanced additives for thermal energy storage10.1016/j.est.2022.104568 ↗
8. Thermal management of photovoltaic solar cells using polyethylene glycol 1000 (PG1000) as a phase change material10.1016/j.tsep.2018.01.012 ↗
9. Recent advances on thermal conductivity enhancement of phase change materials for energy storage system: a review10.1016/j.ijheatmasstransfer.2018.08.049 ↗
10. Polyethylene glycol supported by phosphorylated polyvinyl alcohol/graphene aerogel as a high thermal stability phase change material10.1016/j.compositesb.2019.107545 ↗
11. Erythritol confined in multiwalled carbon nanotubes reinforced silica aerogel as novel form-stable phase change materials10.1016/j.molliq.2022.119589 ↗
12. Preparation and thermal energy storage properties of erythritol/polyaniline form–stable phase change material10.1016/j.solmat.2019.109989 ↗
13. Fabrication and characterization of novel meso–porous carbon/n–octadecane as form–stable phase change materials for enhancement of phase-change behavior10.1016/j.jmst.2018.11.001 ↗
14. Synthesis,characterization and properties of palmitic acid/high density polyethylene/graphene nanoplatelets composites as form-stable phase change materials10.1016/j.solmat.2016.06.049 ↗
15. A polyethylene glycol–based form–stable phase change material supported by nanoarray-modified metal foam10.1016/j.est.2021.103592 ↗
16. Metal foams application to enhance the thermal performance of phase change materials: a review of experimental studies to understand the mechanisms10.1016/j.est.2022.104650 ↗
17. A comparative study of myristic acid/bentonite and myristic acid/Eudragit L100 form stable phase change materials for thermal energy storage10.1016/j.solmat.2014.03.057 ↗
18. Experimental investigation of preparation and thermal performances of paraffin/bentonite composite phase change material10.1016/j.enconman.2011.05.015 ↗
19. Fatty amines/graphene sponge form-stable phase change material composites with exceptionally high loading rates and energy density for thermal energy storage10.1016/j.cej.2019.122831 ↗
20. A novel composite phase change material from lauric acid, nano–Cu and attapulgite: preparation,characterization and thermal conductivity enhancement10.1016/j.est.2021.103921 ↗
21. Experimental study on thermal properties and thermal performance of eutectic hydrated salts/expanded perlite form–stable phase change materials for passive solar energy utilization10.1016/j.solmat.2018.08.012 ↗
22. Preparation and properties of capric acid: stearic acid/hydrophobic expanded perlite–aerogel composite phase change materials10.1016/j.renene.2021.07.125 ↗
23. Thermal conductivity enhancement of form–stable tetradecanol/expanded perlite composite phase change materials by adding Cu powder and carbon fiber for thermal energy storage10.1016/j.applthermaleng.2019.03.140 ↗
24. Anticorrosion performance of polyvinyl butyral composite coatings improved by polyaniline–multiwalled carbon nanotubes/poly (methylhydrosiloxane)10.1016/j.tsf.2020.138347 ↗
25. Highly improved mechanical performances of polyvinyl butyral through fluorescent carbon dots10.1016/j.matlet.2020.128537 ↗
26. Degradable collagen/sodium alginate/polyvinyl butyral high barrier coating with water/oil–resistant in a facile and effective approach10.1016/j.carbpol.2021.118962 ↗
27. Effect of different dimensional carbon materials on the properties and application of phase change materials: a review10.1016/j.apenergy.2019.03.085 ↗
28. Metal foam-phase change material composites for thermal energy storage: a review of performance parameters10.1016/j.rser.2021.111919 ↗
29. Nano–Ag modified bio–based loofah foam/polyethylene glycol composite phase change materials with higher photo-thermal conversion efficiency and thermal conductivity10.1016/j.est.2022.105238 ↗
30. A novel composite phase change material from lauric acid, nano–Cu and attapulgite: preparation, characterization and thermal conductivity enhancement10.1016/j.est.2021.103921 ↗
31. Preparation and thermal properties of exfoliated graphite/erythritol/mannitol eutectic composite as form-stable phase change material for thermal energy storage10.1016/j.solmat.2018.01.012 ↗
32. Unsaturated polyester resin supported form–stable phase change materials with enhanced thermal conductivity for solar energy storage and conversion10.1016/j.renene.2021.04.033 ↗
33. Honeycomb carbon fibers strengthened composite phase change materials for superior thermal energy storage10.1016/j.applthermaleng.2019.114493 ↗
34. The thermal conductivity improvements of phase change materials using modified carbon nanotubes10.1016/j.diamond.2022.109023 ↗
35. Construction of hybrid graphene oxide/graphene nanoplates shell in paraffin microencapsulated phase change materials to improve thermal conductivity for thermal energy storage10.1016/j.colsurfa.2020.124780 ↗
36. Thermal properties of 1-hexadecanol/high density polyethylene/graphene nanoplates composites as form–stable heat storage materials10.1016/j.solmat.2022.111580 ↗
37. A review on carbon–based phase change materials for thermal energy storage10.1016/j.est.2022.104166 ↗
38. Carbon based material included–shaped stabilized phase change materials for sunlight–driven energy conversion and storage: an extensive review10.1016/j.solener.2018.05.007 ↗
39. Thermal properties of phase change materials reinforced with multi–dimensional carbon nanomaterials10.1016/j.ijheatmasstransfer.2021.122166 ↗
40. Emerging PG/VO2 dual phase change materials for thermal energy storage10.1016/j.solmat.2022.111686 ↗
41. PBT/adipic acid modified PG solid–solid phase change composites10.1016/j.est.2022.104753 ↗
42. Enhanced thermal conductivity of composite phase change materials based on carbon modified expanded perlite10.1016/j.matchemphys.2021.124226 ↗
43. Preparation and performance of novel form-stable composite phase change materials based on polyethylene glycol/white carbon black assisted by super–ultrasound–assisted10.1016/j.tca.2016.06.012 ↗
44. Polyethylene glycol/modified carbon foam composites for efficient light–thermal conversion and storage10.1016/j.polymer.2021.123894 ↗
45. Impact properties of Kolon/PB fabrics reinforced with rice–husk silica particles10.1016/j.matlet.2022.132668 ↗
46. Thermal properties of polyvinyl butyral/graphene composites as encapsulation materials for solar cells10.1016/j.solener.2017.12.051 ↗
47. Construction of a novel polytetrafluoroethylene-based sealant paste: the effect of polyvinyl butyral (PB) and nano–alumina on the sealing performance and construction formulations10.1016/j.rineng.2022.100460 ↗
48. Palmitic acid/polyvinyl butyral/expanded graphite composites as form-stable phase change materials for solar thermal energy storage10.1016/j.apenergy.2018.07.068 ↗
49. Polyethylene glycol/halloysite@Ag nanocomposite PCM for thermal energy storage: simultaneously high latent heat and enhanced thermal conductivity10.1016/j.solmat.2019.01.023 ↗
50. Thermal properties improvement of lauric acid/iron foam composites with graphene nanoplates as thermal energy storage materials10.1016/j.est.2019.101163 ↗
51. Preparation of porous titanium dioxide foam impregnated with polyethylene glycol as shape–stable composite phase change materials10.1016/j.est.2022.104416 ↗
52. Thermal conductivity enhancement of polyethylene glycol/expanded vermiculite shape-stabilized composite phase change materials with silver nanowire for thermal energy storage10.1016/j.cej.2016.03.068 ↗