Ceramic–molten salt composites (CPCMs) for high-temperature thermal energy storage: Improving sinterability and thermal stability by using solid wastes as skeletons
Source abstract
Abstract
Molten salts are ideal high-temperature thermal energy storage materials for solar energy generation; however, disadvantages such as leakage, corrosive behavior, and low thermal conductivity limit their widespread application. The use of ceramic skeletons to encapsulate molten salts by the mixing-sintering method is a promising approach to overcome the above shortcomings. However, the CPCMs fabricated by the mixing-sintering method usually have high porosity and are easily deformed at temperatures above the melting point of the loaded salt. In this study, two solid wastes, ferrotitanium slag and waste glass, were first used as skeleton materials to encapsulate molten Na 2SO 4 –NaCl salt; herein, waste glass was also introduced as a modifier to promote the sinterability and thermal stability of the CPCMs. The results demonstrated that the waste glass addition not only improved the sinterability via the viscous flow mechanism but also enhanced the compressive strength, thermal conductivity, thermal cycling stability, and high-temperature structural stability of the CPCMs. Additionally, ferrotitanium slag had good compatibility with the Na 2SO 4–NaCl salt. The waste glass reacted with the molten salt to form a new compound, (Na 0.8Ca 0.1) 2SO 4. Although the synthesis of (Na 0.8Ca 0.1) 2SO 4 increased the melting temperature of the CPCMs by 3–4 °C, it improved the melting enthalpy of the CPCMs that was beneficial for compensating the salt loss during thermal cycling. In summary, an eco-friendly and low-cost thermal energy storage material was developed in this study, and more importantly, a promising approach to improve the sinterability and thermal stability of CPCMs was proposed.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Phase Change Materials Research · Adsorption and Cooling Systems · Hygrothermal properties of building materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (59)
Show source-provided references
1. Preparation and thermal energy storage properties of paraffin/expanded graphite composite phase change material10.1016/j.apenergy.2011.10.014 ↗
2. Al–Si @ Al2O3 @ mullite microcapsules for thermal energy storage: preparation and thermal properties10.1016/j.solmat.2020.110697 ↗
3. The Paris Agreement zero-emissions goal is not always consistent with the 1.5 °C and 2 °C temperature targets
4. Latest developments on TES and CSP technologies–Energy and environmental issues, applications and research trends10.1016/j.applthermaleng.2019.114806 ↗
5. Thermal energy storage (TES) with phase change materials (PCM) in solar power plants (CSP). Concept and plant performance10.1016/j.apenergy.2019.113646 ↗
6. Applications and technological challenges for heat recovery, storage and utilisation with latent thermal energy storage10.1016/j.apenergy.2020.116277 ↗
7. Molten salts in the light of corrosion mitigation strategies and embedded with nanoparticles to enhance the thermophysical properties for CSP plants10.1016/j.solmat.2020.110768 ↗
8. Skeleton materials for shape-stabilization of high temperature salts based phase change materials: a critical review10.1016/j.rser.2019.109539 ↗
9. Preparation and characterization of a heat storage material: shape-stabilized KNO3 using a modified diatomite-based porous ceramic as the skeleton10.1016/j.ceramint.2021.06.040 ↗
10. Nacre-like ceramics-based phase change composites for concurrent efficient solar-to-thermal conversion and rapid energy storage10.1016/j.solmat.2021.111240 ↗
11. Shape-stabilized phase change materials based on porous supports for thermal energy storage applications10.1016/j.cej.2018.09.013 ↗
12. Compatibility of SiC–and MAX phase-based ceramics with a KNO3-NaNO3 molten solar salt10.1016/j.solmat.2019.03.007 ↗
13. Improved thermophysical properties of shape-stabilized NaNO3 using a modified diatomite-based porous ceramic for solar thermal energy storage10.1016/j.renene.2021.07.023 ↗
14. Performance of novel Na2SO4-NaCl-ceramic composites as high temperature phase change materials for solar power plants (Part II)10.1016/j.solmat.2018.05.028 ↗
15. MgO based composite phase change materials for thermal energy storage: the effects of MgO particle density and size on microstructural characteristics as well as thermophysical and mechanical properties10.1016/j.apenergy.2019.04.094 ↗
16. Novel low-cost anorthite porous ceramic-based binary chlorate high-temperature thermal energy storage material: preparation and characterization10.1021/acs.energyfuels.1c01196 ↗
17. Titanium-alumina slag—semifunctional technogenic resource of high-alumina composition. Part 1. substance composition and titanium-alumina slag properties10.1007/s11148-017-0070-7 ↗
18. Preparation and characterization of alumina/calcium–hexaluminate ceramic composites from ferrotitanium slag10.1016/j.jeurceramsoc.2020.05.004 ↗
19. Physical properties of calcium aluminates from vibrational spectroscopy10.1016/j.gca.2004.05.030 ↗
20. Thermal properties of eutectic salts/ceramics/expanded graphite composite phase change materials for high-temperature thermal energy storage10.1016/j.solmat.2021.111047 ↗
21. Novel Na2SO4-NaCl-ceramic composites as high temperature phase change materials for solar thermal power plants (Part I)10.1016/j.solmat.2017.12.034 ↗
22. Sodium sulfate–diatomite composite materials for high temperature thermal energy storage10.1016/j.powtec.2014.08.075 ↗
23. Preparation and characterization of KNO3/diatomite shape-stabilized composite phase change material for high temperature thermal energy storage10.1016/j.jmst.2016.02.011 ↗
24. Sodium nitrate–diatomite composite materials for thermal energy storage10.1016/j.solener.2017.03.003 ↗
25. Red mud-molten salt composites for medium-high temperature thermal energy storage and waste heat recovery applications10.1016/j.jhazmat.2021.125407 ↗
26. Effect of SiO2/BaO ratio on sintering behavior, crystallization behavior, and properties of SrO-BaO-B2O3-SiO2 glass-ceramics10.1016/j.ceramint.2021.03.250 ↗
27. Characterization of ceramic tiles containing LCD waste glass10.1016/j.ceramint.2016.01.172 ↗
28. Review in Situ high-temperature optical microscopy10.1023/A:1004706922530 ↗
29. Investigation of pyroplastic deformation of whitewares: effect of crystal phases in the “CaO’’ based glassy matrix10.1016/j.ceramint.2018.04.169 ↗
30. Effect of talc addition on pyroplastic deformation of an alumina strengthened porcelain10.2109/jcersj2.16132 ↗
31. Preparation and thermal shock resistance of corundum-mullite composite ceramics from andalusite10.1016/j.ceramint.2016.10.116 ↗
32. Pyroplasticity in porcelain tiles10.1016/j.msea.2006.04.073 ↗
33. Foam glass using sodium hydroxide as foaming agent: study on the reaction mechanism in soda-lime glass matrix10.1016/j.jnoncrysol.2019.02.003 ↗
34. Synthesis of a novel three-dimensional Na2SO4@SiO2@Al2O3-SiO2 phase change material doped aerogel composite with high thermal resistance and latent heat10.1016/j.ceramint.2018.08.294 ↗
35. Form-stable ternary carbonates/MgO composite material for high temperature thermal energy storage10.1016/j.solener.2019.01.002 ↗
36. Viscous flow as the driving force for the densification of low-temperature co-fired ceramics10.1111/j.1551-2916.2006.01362.x ↗
37. Viscous flow flash sintering of porous silica glass10.1016/j.jnoncrysol.2017.09.024 ↗
38. Investigation on low-temperature reactive viscous flow sintering behavior of lanthanum-borate glass-ceramic with BaTi4O9 ceramic filler10.1016/j.jeurceramsoc.2020.05.025 ↗
39. Phase evolution during reactive sintering by viscous flow: disclosing the inner workings in porcelain stoneware firing10.1016/j.jeurceramsoc.2019.12.030 ↗
40. Shape-stabilized phase change materials using molten NaNO3–KNO3 eutectic and mesoporous silica matrices10.1016/j.solmat.2020.110644 ↗
41. Micro encapsulated & form-stable phase change materials for high temperature thermal energy storage10.1016/j.apenergy.2018.02.064 ↗
42. The phase diagram of the system Na2SO4-CaSO410.1016/S0992-4361(99)80001-0 ↗
43. Cold sintering of NaNO3/MgO heat-storage composite10.1016/j.ceramint.2020.08.066 ↗
44. Diatomite: a promising natural candidate as carrier material for low, middle and high temperature phase change material10.1016/j.enconman.2015.03.071 ↗
45. Y. Qin, X. Yu, G.H. Leng, L. Zhang, Y.L. Ding, Effect of diatomite content on diatomite matrix based composite phase change thermal storage material, Mater. Res. Innovat.. S2-453–S2-456. https://doi.org/10.1179/1432891714Z.000000000449.10.1179/1432891714Z.000000000449 ↗
46. A novel low-temperature fabrication approach of composite phase change materials for high temperature thermal energy storage10.1016/j.apenergy.2018.12.072 ↗
47. Transformation enthalpy of the alkali-earths sulfates (SrSO4, CaSO4, MgSO4, BaSO4)10.1016/S0040-6031(99)00109-4 ↗
48. Experimental verification of theoretically estimated composition and enthalpy of fusion of eutectic salt mixtures10.1016/j.solmat.2017.09.033 ↗
49. Bansal · 1986
50. Heat capacities of lanthanide and actinide monazite-type ceramics10.1016/j.jnucmat.2015.04.032 ↗
51. Thermal conduction model of metal and ceramics10.1016/j.ceramint.2009.05.026 ↗
52. Thermal shock resistance of Si3N4 and Si3N4–SiC ceramics with rare-earth oxide sintering additives10.1016/j.jeurceramsoc.2014.04.034 ↗
53. Unified theory of thermal shock fracture initiation and crack propagation in brittle ceramics10.1111/j.1151-2916.1969.tb15848.x ↗
54. Elastic energy at fracture and surface energy as design criteria for thermal Shock10.1111/j.1151-2916.1963.tb14605.x ↗
55. Ca(NO3)2-NaNO3/expanded graphite composite as a novel shape-stable phase change material for mid- to high-temperature thermal energy10.1016/j.enconman.2018.02.057 ↗
56. RIR-measurement and use in quantitative XRD10.1017/S0885715600013257 ↗
57. Development of a creep rate porosity correction factor10.1016/0167-577X(90)90113-Z ↗
58. Fabrication and thermal properties investigation of aluminium based composite phase change material for medium and high temperature thermal energy storage10.1016/j.solmat.2020.110511 ↗
59. Shape-stabilized phase change materials based on porous supports for thermal energy storage applications10.1016/j.cej.2018.09.013 ↗