Low-cost magnesium-based eutectic salt hydrate phase change material with enhanced thermal performance for energy storage
Source abstract
Abstract
Low-cost salt hydrate eutectic phase change materials (EPCMs) are attracting increasing attentions and have shown good application prospects for medium-temperature solar thermal energy storage. Water control during sample preparation, supercooling inhibition, and cycle stability are crucial to ensure the thermal reliability of salt hydrate PCM-based thermal energy storage systems. In this study, a “differential scanning calorimeter (DSC) monitoring system evolution process” is developed to prepare MgCl 2·6H 2O and Mg-EPCM [MgCl 2·6H 2O (43.0 wt%)-Mg(NO 3) 2·6H 2 O (57.0 wt%)], in which unpurified industrial bischofite is used as a precursor. Melting enthalpy of the prepared MgCl 2·6H 2O can be raised from 125.6 to 164.2 J/g, which is higher than that of recrystallized MgCl 2·6H 2O and comparable to those of guaranteed reagent (GR), 3 N (purity: 99.9%), and 4 N (purity: 99.99%) MgCl 2·6H 2 O. Furthermore, melting enthalpy of the prepared Mg-EPCM was improved by approximately 10%, from 126 to 140.1 J/g. The latent heat storage capacity is mainly affected by the preparation method, rather than by the small amounts of impurity elements arising from the precursor (impurity rate: ≤ 0.4%). Moreover, 0.5% Sr(OH) 2·8H 2O has inhibited the supercooling degree of Mg-EPCM within 1.0 °C, with a melting enthalpy of 139.5 J/g. It is found that Sr(OH) 2·8H 2 O participates in eutectic formation and simultaneously nucleates the system to inhibit supercooling. Thermal cycle testing shows that there is almost no significant degradation after 500 thermal cycles. The low-cost Mg-EPCM developed here exhibits an excellent latent heat capacity and inhibits supercooling, showing great practical potential for latent heat storage systems.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Phase Change Materials Research · Adsorption and Cooling Systems · Solar Thermal and Photovoltaic Systems
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (58)
Show source-provided references
1. A review on current status and challenges of inorganic phase change materials for thermal energy storage systems10.1016/j.rser.2016.12.012 ↗
2. Effect of different dimensional carbon materials on the properties and application of phase change materials: a review10.1016/j.apenergy.2019.03.085 ↗
3. Optimization strategies of composite phase change materials for thermal energy storage, transfer, conversion and utilization10.1039/D0EE01355B ↗
4. Experimental investigation of high performance composite phase change materials based on sodium acetate trihydrate for solar thermal energy storage10.1016/j.solmat.2021.111418 ↗
5. A comprehensive review on phase change materials for heat storage applications: development, characterization, thermal and chemical stability10.1016/j.solmat.2021.111392 ↗
6. MgCl2·6H2O-Mg(NO3)2·6H2O eutectic/SiO2 composite phase change material with improved thermal reliability and enhanced thermal conductivity10.1016/j.solmat.2017.07.019 ↗
7. A comprehensive review on phase change materials for heat storage applications: development, characterization, thermal and chemical stability10.1016/j.solmat.2021.111392 ↗
8. Review on thermal performances and applications of thermal energy storage systems with inorganic phase change materials10.1016/j.energy.2018.09.128 ↗
9. A review on encapsulation techniques for inorganic phase change materials and the influence on their thermophysical properties10.1016/j.rser.2017.01.159 ↗
10. High energy-density and power-density thermal storage prototype with hydrated salt for hot water and space heating10.1016/j.apenergy.2019.04.114 ↗
11. A review of performance enhancement of PCM based latent heat storage system within the context of materials, thermal stability and compatibility10.1016/j.enconman.2016.02.045 ↗
12. Understanding the transition process of phase change and dehydration reaction of salt hydrate for thermal energy storage10.1016/j.applthermaleng.2019.114655 ↗
13. Modification on hydrated salt-based phase change composites with carbon fillers for electronic thermal management10.1002/er.4502 ↗
14. Salt hydrate/expanded vermiculite composite as a form-stable phase change material for building energy storage10.1016/j.solmat.2018.09.016 ↗
15. Lithium-ion battery thermal management using heat pipe and phase change material during discharge-charge cycle: a comprehensive numerical study10.1016/j.apenergy.2019.03.043 ↗
16. Review of stability and thermal conductivity enhancements for salt hydrates10.1016/j.est.2019.100794 ↗
17. Solar energy storage in phase change materials: first-principles thermodynamic modeling of magnesium chloride hydrates10.1021/jp411461m ↗
18. Salt hydrates as latent heat storage materials:Thermophysical properties and costs10.1016/j.solmat.2015.10.029 ↗
19. Suppressing supercooling in magnesium nitrate hexahydrate and evaluating corrosion of aluminium alloy container for latent heat storage application10.1007/s10973-017-6334-0 ↗
20. Demonstration of Mg(NO3)2·6H2O-based composite phase change material for practical-scale medium-low temperature thermal energy storage10.1016/j.energy.2020.117711 ↗
21. Microfiltration of Mg(NO3)2·6H2O into g-C3N4 and macroencapsulation with commercial sealants: a two-step method to enhance the thermal stability of inorganic composite phase change materials10.1016/j.apenergy.2019.113540 ↗
22. Study of magnesium nitrate hexahydrate and magnesium chloride hexahydrate mixture as phase change material
23. Phase diagram prediction of the system Mg(NO3)2-MgCl2-H2O as phase change materials
24. Thermal characteristics of magnesium nitrate hexahydrate and magnesium chloride hexahydrate mixture as a phase change material for effective utilization of urban waste heat10.1016/j.applthermaleng.2003.09.003 ↗
25. Recent developments in phase change materials for energy storage applications: a review10.1016/j.ijheatmasstransfer.2018.09.126 ↗
26. Experimental exploration of incorporating form-stable hydrate salt phase change materials into cement mortar for thermal energy storage10.1016/j.applthermaleng.2018.05.042 ↗
27. Preparation and characterization of an inorganic magnesium chloride/nitrate/graphite composite for low temperature energy storage10.1016/j.solmat.2017.09.046 ↗
28. Phase change materials for energy storage nucleation to prevent supercooling10.1016/0927-0248(92)90116-7 ↗
29. Eutectic mixtures for solar heat storage10.1016/0038-092X(78)90117-2 ↗
30. Low temperature heat storage with phase change materials10.1080/01430750.1980.9675731 ↗
31. Surface evolution of eutectic MgCl2·6H2O-Mg(NO3)2·6H2O phase change materials for thermal energy storage monitored by scanning probe microscopy10.1016/j.apsusc.2021.150549 ↗
32. Progress on use of nanoparticles in salt hydrates as phase change materials10.1016/j.rser.2020.109727 ↗
33. Thermal cycle testing of calcium chloride hexahydrate as a possible PCM for latent heat storage10.1016/j.solmat.2008.02.021 ↗
34. Studies on magnesium chloride hexahydrate as phase change materials
35. Recent advances in thermophysical properties enhancement of phase change materials for thermal energy storage10.1016/j.solmat.2021.111309 ↗
36. A review of phase change heat transfer in shape-stabilized phase change materials (SS-PCMs) based on porous supports for thermal energy storage10.1016/j.rser.2020.110127 ↗
37. Multi-energy driven form-stable phase change materials based on SEBS and reduced graphene oxide aerogel10.1016/j.solmat.2021.111390 ↗
38. Fabrication and thermal properties of CaCl2·6H2O-Co(NH2)2/SiO2 as room-temperature shape-stable composite PCM for building thermal insulation10.1016/j.solmat.2021.111355 ↗
39. Form-stable Na2SO4·10H2O-Na2HPO4·12H2O eutectic/hydrophilic fumed silica composite phase change material with low supercooling and low thermal conductivity for indoor thermal comfort improvement10.1002/er.5178 ↗
40. Preparation and properties of phase change temperature-tuned composite phase change material based on sodium acetate trihydrate-urea/fumed silica for radiant floor heating system10.1016/j.applthermaleng.2019.114253 ↗
41. Preparation and characterization of paraffin/palygorskite shape-stable composite phase change materials for thermal energy storage10.1016/j.est.2020.102189 ↗
42. Preparation of a new capsule phase change material for high temperature thermal energy storage10.1016/j.jallcom.2021.159179 ↗
43. High temperature shape Stabilized phase change materials obtained using mesoporous silica and NaCl - NaBr - Na2MoO4 salt eutectic10.1016/j.solmat.2020.110760 ↗
44. Biomass-based shape-stabilized phase change materials from artificially cultured ship-shaped diatom frustules with high enthalpy for thermal energy storage10.1016/j.compositesb.2020.108500 ↗
45. Encapsulation of lauric acid in reduced graphene-N-doped porous carbon supporting scaffold for multi-functional phase change composites10.1016/j.renene.2021.02.028 ↗
46. Nano-hybridized form-stable ester@F-SiO2 phase change materials for melt-spun PA6 fibers engineered towards smart thermal management fabrics10.1016/j.cej.2020.126369 ↗
47. Form-stable phase change material embedded in three-dimensional reduced graphene aerogel with large latent heat for thermal energy management10.1016/j.apsusc.2020.147612 ↗
48. Supercooling of phase-change materials and the techniques used to mitigate the phenomenon10.1016/j.apenergy.2019.02.045 ↗
49. Enhanced thermal energy storage performance of salt hydrate phase change material: effect of cellulose nanofibril and graphene nanoplatelet10.1016/j.solmat.2021.111028 ↗
50. Reduction of the subcooling of bischofite with the use of nucleatings agents10.1016/j.solmat.2016.08.015 ↗
51. Nucleation triggering methods in supercooled phase change materials (PCM), a review10.1016/j.tca.2018.10.009 ↗
52. Study of magnesium chloride hexahydrate as heat storage material10.1016/j.tca.2012.07.021 ↗
53. Expanded graphite for thermal conductivity and reliability enhancement and supercooling decrease of MgCl2·6H2O phase change material10.1016/j.materresbull.2018.02.024 ↗
54. Two types of composite phase change panels containing a ternary hydrated salt mixture for use in building envelope and ventilation system10.1016/j.enconman.2018.09.073 ↗
55. A shape-stabilized MgCl2·6H2O-Mg(NO3)2·6H2O/expanded graphite composite phase change material with high thermal conductivity and stability10.1007/s10800-018-1223-1 ↗
56. Development of low-cost inorganic salt hydrate as a thermochemical energy storage material10.1016/j.solmat.2017.10.021 ↗
57. Factors governing MgO(111) faceting in the thermal decomposition of oxide precursors10.1021/acs.chemmater.7b05302 ↗
58. Reactive phase-change materials for enhanced thermal energy storage10.1002/ente.201700495 ↗