journal article·2022-04

Preparation and characterization of n-octadecane @ calcium fluoride microencapsulated phase change materials

Ping Hu, Yang Feng, Qi Li, Chuan-Huang Lin, Yu-Hao Ning, Yi-Ting Li, Lin-Ping Yu, Zhong Cao, Ju-Lan Zeng

Publisher page

Abstract

Microencapsulation of phase change materials (PCMs) with functional shell materials such as luminescent material could endow the obtained microencapsulated PCMs (MPCMs) with improved latent heat storage properties. The PCM core in turn could protect the luminescence shell from large temperature shifting and thus improve its performance. In this work, a series of MPCMs derived from n-octadecane (ODE) core and CaF 2 shell were synthesized via a self-assembly method. The effects of the preparation conditions, including the core/shell mass ratio, the dosage of the emulsifier (styrene-maleic anhydride copolymer, SMA) and the dosage of the chelator (Na 3Cit), on the properties of the prepared ODE@CaF 2 MPCMs were investigated and the optimal preparation condition was obtained. The MPCM obtained according to the optimal procedure (MPCM1) exhibited an encapsulation ratio of 54.02% and a latent heat of 131 J/g with negligible leakage. It also possessed excellent thermal reliability and significantly improved thermal conductivity. The MPCM1 could not only be utilized as good latent heat storage material and thermal regulation material, but also provided one new idea to prevent the thermal quenching of luminescence materials. In addition, this work could shed some light on the high-value utilization of recovered fluorine resources.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Phase Change Materials Research · Flame retardant materials and properties · Perovskite Materials and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Toward controlled thermal energy storage and release in organic phase change materials10.1016/j.joule.2020.07.011 ↗
2. Integrating phase change materials in construction materials: critical review10.1016/j.conbuildmat.2019.05.064 ↗
3. Design and synthesis of novel microencapsulated phase change materials with enhancement of thermal conductivity and thermal stability: self-assembled boron nitride into shell materials10.1016/j.colsurfa.2019.124225 ↗
4. Thermal energy storage for grid applications: current status and emerging trends10.3390/en13020340 ↗
5. Innovative design of microencapsulated phase change materials for thermal energy storage and versatile applications: a review10.1039/C9SE00019D ↗
6. Fabrication of microencapsulated phase change materials based on n-octadecane core and silica shell through interfacial polycondensation10.1016/j.colsurfa.2011.08.043 ↗
7. Hydrophobic modification of silica/exfoliated graphite nanoplatelets aerogel and its application as supporting material for form-stable phase change materials10.1016/j.jiec.2021.04.054 ↗
8. Self-assembly synthesis and properties of microencapsulated n-tetradecane phase change materials with a calcium carbonate shell for cold energy storage10.1021/acssuschemeng.6b02758 ↗
9. Silica-confined composite form-stable phase change materials: a review
10. Microencapsulated paraffin phase-change material with calcium carbonate shell for thermal energy storage and solar-thermal conversion10.1021/acs.langmuir.8b03084 ↗
11. Thermal properties and applications of microencapsulated PCM for thermal energy storage: a review10.1016/j.applthermaleng.2018.11.007 ↗
12. Development of poly(ethylene glycol)/silica phase-change microcapsules with well-defined core-shell structure for reliable and durable heat energy storage10.1016/j.solmat.2021.111069 ↗
13. Microencapsulating n-docosane phase change material into CaCO3/Fe3O4 composites for high-efficient utilization of solar photothermal energy10.1016/j.renene.2021.07.024 ↗
14. One-step synthesis of core shell cellulose-silica/n-octadecane microcapsules and their application in waterborne self-healing multiple protective fabric coatings10.1016/j.jcis.2020.01.106 ↗
15. Preparation, morphology and thermal properties of microencapsulated palmitic acid phase change material with polyaniline shells10.1007/s10973-017-6352-y ↗
16. Impact of C/N ratio on the fate of simultaneous Ca2+ precipitation, F− removal, and denitrification in quartz sand biofilm reactor10.1016/j.chemosphere.2021.129667 ↗
17. Removal of fluorine ions from industrial zinc sulfate solution by a layered aluminum-based composite10.1016/j.hydromet.2017.05.019 ↗
18. Water defluoridation with avocado-based adsorbents: synthesis, physicochemical characterization and thermodynamic studies10.1016/j.molliq.2018.01.084 ↗
19. Removal of fluoride by effectively using spent cation exchange resin10.1007/s10163-017-0659-4 ↗
20. Purification of calcium fluoride (CaF2) sludge by selective carbonation of gypsum10.1016/j.jece.2020.104510 ↗
21. CaF2:Ce3+/Yb3+ hollow spheres luminescence downconversion property optimize anti-reflective coatings for solar cells10.1016/j.solener.2016.04.047 ↗
22. Up-conversion study of CaF2 based oxy-fluoride core-shell particulate nano-glass ceramics via sol-gel method: effect of Yb3+ concentration and cell viability study10.1016/j.ijleo.2020.165304 ↗
23. Lanthanide-doped luminescent nanoprobes: controlled synthesis, optical spectroscopy, and bioapplications10.1039/c3cs60060b ↗
24. Photon up-conversion production in Tb3+–Yb3+ co-doped CaF2 phosphors prepared by combustion synthesis10.1016/j.materresbull.2015.10.023 ↗
25. Temperature sensing and bio-imaging applications based on polyethylenimine/CaF2 nanoparticles with upconversion fluorescence10.1016/j.talanta.2017.03.054 ↗
26. Thermal quenching of Mn4+ luminescence in SrAl12O19:Mn4+10.1016/j.jlumin.2018.10.044 ↗
27. Facile and controllable synthesis of monodisperse CaF2 and CaF2:Ce3+/Tb3+ hollow spheres as efficient luminescent materials and smart drug carriers10.1002/chem.200903137 ↗
28. Microencapsulation of n-octadecane phase change material with calcium carbonate shell for enhancement of thermal conductivity and serving durability: synthesis, microstructure, and performance evaluation10.1016/j.apenergy.2013.10.029 ↗
29. n-Alkane binary molecular alloys10.1021/cm031169p ↗
30. Thermal performance enhancement of cementitious composite containing polystyrene/n-octadecane microcapsules: an experimental and numerical study10.1016/j.renene.2021.01.034 ↗
31. Preparation and thermal characterization of n-octadecane/pentafluorostyrene nanocapsules for phase-change energy storage10.1016/j.est.2021.102327 ↗
32. A silicone rubber based composites using n-octadecane/poly (styrene-methyl methacrylate) microcapsules as energy storage particle10.1016/j.rinp.2017.07.020 ↗
33. Preparation of microencapsulated medium temperature phase change material of Tris(hydroxymethyl)methyl aminomethane@SiO2 with excellent cycling performance10.1016/j.apenergy.2015.05.029 ↗
34. Preparation of Mannitol@Silica core–shell capsules via an interfacial polymerization process from water-in-oil emulsion10.1016/j.colsurfa.2014.06.018 ↗
35. Co-solvent free interfacial polycondensation and properties of polyurea PCM microcapsules with dodecanol dodecanoate as core material10.1016/j.solener.2020.02.071 ↗
36. Facile synthesis of microencapsulated 1-dodecanol/melamine-formaldehyde phase change material using in-situ polymerization for thermal energy storage10.1016/j.colsurfa.2020.125698 ↗