journal article·2022-04

Robust corrosion performance of cold sprayed aluminide coating in ternary molten carbonate salt for concentrated solar power plants

Jing Luo, Naeem ul Haq Tariq, Han Hui Liu, Ning Li, Li Jia Zhao, Xin Yu Cui, Tian Ying Xiong

Publisher page

Abstract

In concentrated solar power (CSP) technology, high temperature corrosion is a key issue for material selection. In this context, a homogeneous and crack-free FeAl coating with high Al content was prepared by using cold spray (combined with a post heat treatment) to improve the corrosion resistance of stainless steel 316 L (SS316L) in molten carbonate salt for CSP applications. A series of immersion corrosion tests were performed to explore the corrosion behavior of the prepared aluminide coating in the LiNaK molten carbonate salt at 700 °C. The results demonstrated that the corrosion resistance of SS316L in the molten carbonate salt can be greatly improved by the prepared aluminide coating. This is attributed to the formation of a continuous dense LiAlO 2 layer on the surface of the coating during corrosion. Although an α-LiAlO 2 → γ-LiAlO 2 phase transformation occurred during corrosion, it showed little influence on the corrosion performance of the prepared coating under the present experimental conditions. Furthermore, the coating remained intact even after 1000 h of corrosion. It is envisaged that the prepared coating has broad application prospects for CSP system with molten carbonate salt medium.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Coal Combustion and Slurry Processing · Nuclear Materials and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (60)

Show source-provided references
1. Advanced heat transfer fluids for direct molten salt line-focusing CSP plants10.1016/j.pecs.2018.02.002 ↗
2. Concentrating solar power Gen3 demonstration roadmap
3. Protective coatings for high temperature molten salt heat storage systems in solar concentration power plants
4. Experimental study on optimized composition of mixed carbonate salt for sensible heat storage in solar thermal power plant10.1016/j.solener.2011.05.004 ↗
5. Thermal energy storage using chloride salts and their eutectics10.1016/j.applthermaleng.2016.07.046 ↗
6. Experimental verification of theoretically estimated composition and enthalpy of fusion of eutectic salt mixtures10.1016/j.solmat.2017.09.033 ↗
7. The thermal stability of molten lithium-sodium-potassium carbonate and the influence of additives on the melting point10.1115/1.4006895 ↗
8. Coyle · 1986
9. Corrosion of iron in molten carbonates at 650 °C10.1149/1.2100336 ↗
10. The corrosion behaviour of iron and chromium in molten (Li0.62K0.38)2CO310.1016/S0013-4686(97)10191-8 ↗
11. Spectrophotometric study of the corrosion behaviour of chromium in molten alkali carbonates10.1016/S0378-7753(97)02688-8 ↗
12. Mechanisms for oxidation and passive behavior of nickel in molten carbonate10.1149/1.1836993 ↗
13. Corrosion behavior of Fe-Cr alloys in Li2CO3-K2CO3 molten carbonate10.1149/1.1955168 ↗
14. Electrochemical impedance and modelling studies of the corrosion of three commercial stainless steels in molten carbonate
15. Corrosion resistance of HR3C to a carbonate molten salt for energy storage applications in CSP plants10.1016/j.solmat.2016.08.014 ↗
16. Corrosion behaviour of some stainless steel alloys in molten alkali carbonates (I)10.1023/A:1017954720772 ↗
17. Corrosion of inconel alloys for application as inert anodes in low-temperature molten carbonate electrolysis processes10.1016/j.ijhydene.2020.06.028 ↗
18. Stress assisted oxidative failure of Inconel 601 for thermal energy storage10.1016/j.solmat.2016.10.008 ↗
19. On the effect of cold-rolling on the corrosion of SS316L alloy in a molten carbonate salt10.1016/j.solmat.2019.110136 ↗
20. Comparative interaction of cold-worked versus annealed inconel 601 with molten carbonate salt at 450 °C10.1016/j.corsci.2017.01.004 ↗
21. The role of temperature on the corrosion and passivation of type 310S stainless steel in eutectic (Li+K) carbonate melt10.1016/j.jpowsour.2006.04.068 ↗
22. Effects of temperature and partial pressure of CO2/O-2 on corrosion behaviour of stainless-steel in molten Li/Na carbonate salt10.1016/S0378-7753(00)00376-1 ↗
23. Corrosion of steel alloys in eutectic NaCl + Na2CO3 at 700 °C and Li2CO3 + K2CO3 + Na2CO3 at 450 °C for thermal energy storage10.1016/j.solmat.2017.05.063 ↗
24. Corrosion of alloys in high temperature molten-salt heat transfer fluids with air as the cover gas10.1016/j.solener.2019.09.015 ↗
25. Corrosion behavior of SS316L in ternary Li2CO3-Na2CO3-K2CO3 eutectic mixture salt for concentrated solar power plants10.1016/j.solmat.2020.110679 ↗
26. Oxidation behavior of superalloys in oxidizing and reducing environments10.1016/S0010-938X(00)00011-1 ↗
27. Corrosion behavior of B2Fe aluminide alloys in molten carbonates at 650 °C10.5796/kogyobutsurikagaku.64.508 ↗
28. Corrosion resistance of the intermetallic compound, NiAl,in a molten carbonate fuel cell environment10.1016/S0378-7753(01)00854-0 ↗
29. Electrochemical-impedance study of the corrosion of Ni and FeAl intermetallic alloy in molten (0.62Li, 0.38K)2CO3 at 650 °C10.1023/A:1004589103992 ↗
30. An electrochemical study of the effect of Li on the corrosion behavior of Ni3Al intermetallic alloy in molten (Li + K) carbonate10.1016/j.corsci.2009.04.012 ↗
31. Thermal spray coatings for molten carbonate fuel cells separator plates10.1016/S0257-8972(01)01435-9 ↗
32. Corrosion evaluation of alloys and MCrAlX coatings in molten carbonates for thermal solar applications10.1016/j.solmat.2016.07.029 ↗
33. Enhancing corrosion resistance of type 310S stainless steel in carbonate melt by hot-dip aluminizing10.1149/2.1241807jes ↗
34. High temperature corrosion beneath carbonate melts of aluminide coatings for CSP application10.1016/j.solmat.2020.110514 ↗
35. Hot corrosion study of coated separator plates of molten carbonate fuel cells by slurry aluminides10.1016/S0257-8972(02)00417-6 ↗
36. Intermetallic FeAl based coatings deposited by the electrospark technique: corrosion behavior in molten (Li+K) carbonate10.1016/j.surfcoat.2003.10.050 ↗
37. Development of a new aluminizing method for molten carbonate fuel cell wet seals10.1115/1.1843119 ↗
38. Corrosion behavior of aluminide diffusion coatings in low temperature molten carbonate electrolysis environments10.1002/maco.201810123 ↗
39. Degradation behaviour of Al-Fe coatings in wet-seal area of molten carbonate fuel cells10.1016/S0378-7753(02)00353-1 ↗
40. Characterization of copper layers produced by cold gas-dynamic spraying10.1361/105996300770350087 ↗
41. Thermo-mechanical post-treatment: a strategic approach to improve microstructure and mechanical properties of cold spray additively manufactured composites10.1016/j.matdes.2018.06.062 ↗
42. Microstructure and corrosion performance of a cold sprayed aluminium coating on AZ91D magnesium alloy10.1016/j.corsci.2010.05.023 ↗
43. Bonding mechanism in cold gas spraying10.1016/S1359-6454(03)00274-X ↗
44. Development of a generalized parameter window for cold spray deposition10.1016/j.actamat.2005.10.005 ↗
45. Cold spray technology
46. Slurry aluminizing: a solution for molten nitrate salt corrosion in concentrated solar power plants10.1016/j.solmat.2015.11.024 ↗
47. Trans tech, Steam oxidation of slurry aluminide coatings on ferritic steels for advanced coal-fired steam power plants
48. The high-temperature oxidation behavior of hot-dipping Al-Si coating on low carbon steel10.1016/j.surfcoat.2005.11.031 ↗
49. Analysis of mixtures of gamma lithium aluminate, lithium aluminum carbonate hydroxide hydrate, and lithium carbonate
50. Thermal stability and decomposition kinetics of Li2Al4CO3(OH)12·3H2O10.1007/BF00356456 ↗
51. The transformation of LiAlO2 crystal structure in molten Li/K carbonate10.1016/S0378-7753(02)00045-9 ↗
52. Electrochemistry of molten-salt corrosion10.1016/0921-5093(91)90265-O ↗
53. Corrosion behavior of AISI 316L stainless steel and ODS FeAl aluminide in eutectic Li2CO3-K2CO3 molten carbonates under flowing CO2-O2 gas mixtures10.1023/A:1004538931676 ↗
54. The nature of the third-element effect in the oxidation of Fe-xCr-3 at.% Al alloys in 1 atm O2 at 1000 °C10.1016/j.corsci.2007.06.019 ↗
55. High temperature corrosion of low and high alloy steels under molten carbonate fuel cell conditions10.1002/maco.19970480803 ↗
56. Corrosion behaviour of nickel-aluminium alloys in molten carbonate10.1002/maco.19970480405 ↗
57. Solubilities of LiFeO2 and (Li,K)2CrO4 in molten alkali carbonates at 650 °C10.1149/1.2100840 ↗
58. Interdiffusion in Fe-Al system: aluminizing10.1179/msc.1983.17.1.27 ↗
59. Segregation of alloying elements at the bcc-Fe/B2-NiAl interface and the corresponding effects on the interfacial energy10.1016/j.intermet.2021.107096 ↗
60. Influence of interfacial stress on microstructural evolution in NiAl alloys10.1134/S0021364020150023 ↗