journal article·2022-03Open access

Large-area bifacial n-TOPCon solar cells with in situ phosphorus-doped LPCVD poly-Si passivating contacts

Meriç Fırat, Hariharsudan Sivaramakrishnan Radhakrishnan, María Recamán Payo, Patrick Choulat, Hussein Badran, Arvid van der Heide, Jonathan Govaerts, Filip Duerinckx, Loic Tous, Ali Hajjiah, Jef Poortmans

Abstract

The potential of passivating contacts incorporating in situ phosphorus (P)-doped polycrystalline silicon (poly-Si) films grown by low pressure chemical vapor deposition (LPCVD) is demonstrated in this work by integrating these layers at the rear side of large-area (241.3 cm 2 ) bifacial n-type Tunnel Oxide Passivated Contact (n-TOPCon) solar cells with diffused front emitter and screen-printed contacts. In situ doped poly-Si films are studied as their use could simplify the production of industrial n-TOPCon solar cells compared to the common approach relying on ex situ doping of intrinsic LPCVD poly-Si films. The developed poly-Si passivating contacts exhibited excellent characteristics with low recombination current densities in passivated and screen-printing metallized regions down to 2.3 fA/cm 2 and 65.8 fA/cm 2, respectively, and a low contact resistivity of 2.0 mΩ⋅cm 2 . For reaching the best passivating contact characteristics and high solar cell efficiencies, a poly-Si film thickness of 150–200 nm was found to be optimal while a polished rear surface morphology was found to be beneficial. The best solar cell reached a certified power conversion efficiency of 23.01% along with a high open circuit voltage of 691.7 mV, enabled by the passivating contacts with the in situ doped poly-Si films. 1-cell glass-glass laminates were also fabricated with the developed solar cells, which showed no loss in their power output both upon 400 thermal cycles and after 1000 h of damp heat testing. Lastly, a roadmap is presented, indicating strategies to achieve efficiencies up to 25.5% with n-TOPCon solar cells incorporating the in situ P-doped LPCVD poly-Si films.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Silicon Nanostructures and Photoluminescence

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. Fischer · 2021
2. Polysilicon passivated junctions: the next technology for silicon solar cells?10.1016/j.joule.2021.02.013 ↗
3. Design rules for high-efficiency both-sides-contacted silicon solar cells with balanced charge carrier transport and recombination losses10.1038/s41560-021-00805-w ↗
4. Stoker
5. 24.58% total area efficiency of screen-printed, large area industrial silicon solar cells with the tunnel oxide passivated contacts (i-TOPCon) design10.1016/j.solmat.2019.110258 ↗
6. 25% large-area industrial silicon solar cell: learning from history and future perspective
7. Aking TopCON to Top Runner: jolywood president Lin Jianwei talks solar n-type cell innovation - PV Tech
8. 24.58% efficient commercial n-type silicon solar cells with hydrogenation
9. Surface passivation of crystalline silicon solar cells: present and future10.1016/j.solmat.2018.06.047 ↗
10. Passivating contacts and tandem concepts: approaches for the highest silicon-based solar cell efficiencies10.1063/1.5139202 ↗
11. Mass production of industrial tunnel oxide passivated contacts (i-TOPCon) silicon solar cells with average efficiency over 23% and modules over 345 W10.1002/pip.3180 ↗
12. n-Type polysilicon passivating contact for industrial bifacial n-type solar cells10.1016/j.solmat.2016.06.034 ↗
13. Material properties of LPCVD processed n-type polysilicon passivating contacts and its application in PERPoly industrial bifacial solar cells
14. Characterization of screen printed and fire-through contacts on LPCVD based passivating contacts in monoPolyTM solar cells10.1016/j.solener.2020.03.087 ↗
15. Development of thin polysilicon layers for application in monoPolyTM cells with screen-printed and fired metallization10.1016/j.solmat.2019.110358 ↗
16. Progress in screen-printed metallization of industrial solar cells with SiOx/poly-Si passivating contacts10.1016/j.solmat.2020.110751 ↗
17. Kamins · 1998
18. Deposition and electrical properties of in situ phosphorus-doped silicon films formed by low-pressure chemical vapor deposition10.1063/1.338036 ↗
19. Phosphorus‐doped polycrystalline silicon via LPCVD: I. Process characterization10.1149/1.2115258 ↗
20. Phosphorus‐doped polycrystalline silicon via LPCVD: II. Surface interactions of the silane/phosphine/silicon system10.1149/1.2115259 ↗
21. An industrial LPCVD process for in situ phosphorus-doped polysilicon10.1149/1.2086381 ↗
22. An investigation of LPCVD and PECVD of in situ doped polycrystalline silicon for VLSI10.1002/amo.860010508 ↗
23. LPCVD in-situ N-type doped polysilicon process throughput optimization and implementation into an industrial solar cell process flow
24. LPCV-deposited poly-Si passivated contacts: surface passivation, gettering and integration in high efficiency devices
25. Phosphorus doped poly-Si passivated contacts by LPCVD and PECVD for industrial large-area solar cells
26. Fırat
27. Solar energy materials and solar cells TOPCon – technology options for cost efficient industrial manufacturing10.1016/j.solmat.2021.111100 ↗
28. A passivating contact for silicon solar cells formed during a single firing thermal annealing10.1038/s41560-018-0239-4 ↗
29. How much rear side polishing is required? A study on the impact of rear side polishing in PERC solar cells
30. Study on the cleaning process of n+-poly-Si wraparound removal of TOPCon solar cells10.1016/j.solener.2020.09.028 ↗
31. Integration of inline single-side wet emitter etch in PERC cell manufacturing10.1016/j.egypro.2012.07.120 ↗
32. Influence of SINx: H and SIOx films on optical and electrical properties of antireflective coatings for silicon solar cells
33. Approaching 23% with large-area monoPoly cells using screen-printed and fired rear passivating contacts fabricated by inline PECVD10.1002/pip.3097 ↗
34. Rapid and accurate determination of series resistance and fill factor losses in industrial silicon solar cells
35. Understanding contact formation on n-PERT-RJ solar cells
36. Smart wire connection technology
37. A free and fast three-dimensional/two-dimensional solar cell simulator featuring conductive boundary and quasi-neutrality approximations10.1109/TED.2012.2231415 ↗
38. Characterization of absorption losses in rear side N-type polycrystalline silicon passivating contacts10.1063/1.5123831 ↗
39. Optical and electrical characterization of poly-Si/SiOx contacts and their implications on solar cell design
40. Parasitic absorption in polycrystalline Si-layers for carrier-selective front junctions
41. Study of screen printed metallization for polysilicon based passivating contacts
42. Screen printed Ag contacts for n-type polysilicon passivated contacts10.1063/1.5123829 ↗
43. Influence of polysilicon thickness on properties of screen-printed silver paste metallized silicon oxide/polysilicon passivated contacts
44. Recombination at textured silicon surfaces passivated with silicon dioxide10.1063/1.3153979 ↗
45. Contacting of busbarless solar cells for accurate I-V measurements
46. Long-term reliability of silicon wafer-based traditional backsheet modules and double glass modules10.1039/C5RA11224A ↗
47. Requirements of the paris climate agreement for the coming 10 Years on investments, technical roadmap, and expansion of PV manufacturing
48. Exceeding 23% screen-printed rear-emitter bifacial N-PERT cells
49. Reactive ion etched, self-aligned, selective area poly-Si/SiO2 passivated contacts10.1016/j.solmat.2020.110621 ↗
50. Investigating industrial metallization solutions for double-side contact passivated biPoly solar cells