Expanded graphite/paraffin/silica phase change composites with high thermal conductivity and low permeability prepared by the solid-state wet grinding method
Source abstract
Abstract
In this study, expanded graphite (EG)/paraffin (PA)/silica (SiO 2 ) composite phase change materials (PCM), with good thermal conductivity and impermeability, were fabricated for potential applications in solar energy. The EG-PA was first prepared by vacuum adsorption and then encapsulated by SiO 2 through solid-phase wet grinding in the presence of sodium silicate. Our results show that the EG-PA-SiO 2 composite have optimal properties when the mass ratio of raw material is PA: sodium silicate: H 2O = 1:9:2:8. The latent heat of melting of the EG-PA-SiO 2 composite prepared at this mass ratio is 106.2 J/g. The core material loss ratio, after washing with petroleum ether, is 4.79%. The thermal conductivity is 2.053 W/m·K, which is 8.5 times higher than that of pure paraffin wax, and the melt permeability is 9.35% after 120 min at 60 °C. Under simulated sunlight, the time required for the composite material to change from 30 °C to 65 °C is reduced by 70.78% compared to PA and the heat absorption and release times are nearly unchanged under multiple cycles. These results indicate that the material has a stable photothermal conversion efficiency.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Phase Change Materials Research · Solar Thermal and Photovoltaic Systems · Solar Energy Systems and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Emerging applications of phase-change materials (PCMs): teaching an old dog new tricks10.1002/anie.201305201 ↗
2. Thermodynamic and thermal energy storage properties of a new medium-temperature phase change material10.1007/s10973-018-7530-2 ↗
3. Structurally advanced hybrid support composite phase change materials: architectural synergy10.1016/j.ensm.2021.07.022 ↗
4. Recent advances in thermophysical properties enhancement of phase change materials for thermal energy storage10.1016/j.solmat.2021.111309 ↗
5. Review on thermal energy storage with phase change materials (PCMs) in building applications10.1016/j.apenergy.2011.08.025 ↗
6. Three-dimensional rGO@sponge framework/paraffin wax composite shape-stabilized phase change materials for solar-thermal energy conversion and storage10.1016/j.solmat.2020.110600 ↗
7. Microencapsulated phase change materials in solar-thermal conversion systems: understanding geometry-dependent heating efficiency and system reliability10.1021/acsnano.6b07126 ↗
8. Experimental investigation of a domestic solar water heater with solar collector coupled phase-change energy storage10.1016/j.renene.2015.08.017 ↗
9. Evaluation of copper nanoparticles – paraffin wax compositions for solar thermal energy storage10.1016/j.solener.2016.03.004 ↗
10. Improvement of the polarity of polyethylene with oxidized Fischer–Tropsch paraffin wax and its influence on the final mechanical properties10.1002/app.21283 ↗
11. Shape-stabilized phase-change materials supported by eggplant-derived porous carbon for efficient solar-to-thermal energy conversion and storage10.1039/C9SE01272A ↗
12. A foamed cement blocks with paraffin/expanded graphite composite phase change solar thermal absorption material10.1016/j.solmat.2019.110038 ↗
13. Fabrication of paraffin@SiO2 shape-stabilized composite phase change material via chemical precipitation method for building energy conservation10.1016/j.enbuild.2015.09.043 ↗
14. Paraffin/diatomite/multi-wall carbon nanotubes composite phase change material tailor-made for thermal energy storage cement-based composites10.1016/j.energy.2014.05.049 ↗
15. Improving the heat storage/release rate and photo-thermal conversion performance of an organic PCM/expanded graphite composite block10.1016/j.solmat.2019.110081 ↗
16. Carbon-Based composite phase change materials for thermal energy storage, transfer, and conversion10.1002/advs.202001274 ↗
17. A review of phase change heat transfer in shape-stabilized phase change materials (ss-PCMs) based on porous supports for thermal energy storage10.1016/j.rser.2020.110127 ↗
18. Experimental and numerical study of modified expanded graphite/hydrated salt phase change material for solar energy storage10.1016/j.solener.2020.05.052 ↗
19. Photo‐to‐thermal conversion and energy storage of lauric acid/expanded graphite composite phase change materials10.1002/er.5542 ↗
20. Experimental and numerical investigation on dodecane/expanded graphite shape-stabilized phase change material for cold energy storage10.1016/j.energy.2019.116175 ↗
21. Adsorption kinetics and thermodynamics characteristics of expanded graphite for polyethylene glycol10.1155/2010/343545 ↗
22. Preparation and thermal performance of silica/n-tetradecane microencapsulated phase change material for cold energy storage10.1021/acs.energyfuels.6b01799 ↗
23. Fabrication of microencapsulated phase change materials based on n-octadecane core and silica shell through interfacial polycondensation10.1016/j.colsurfa.2011.08.043 ↗
24. New approach for sol-gel synthesis of microencapsulated n- octadecane phase change material with silica wall using sodium silicate precursor10.1016/j.energy.2013.11.088 ↗
25. Pornea · 2021 · 113801
26. Properties of form-stable paraffin/silicon dioxide/expanded graphite phase change composites prepared by sol–gel method10.1016/j.apenergy.2011.11.018 ↗
27. Preparation and characterization of high-temperature non-flowing SiO2/EG/paraffin composites by high-temperature refining10.1016/j.colsurfa.2018.01.043 ↗
28. Silica encapsulation of n-octadecane via sol-gel process: a novel microencapsulated phase-change material with enhanced thermal conductivity and performance10.1016/j.jcis.2009.11.036 ↗
29. Preparation and thermal performance of ternary carbonates/silica microcomposites as phase change materials10.1007/s10971-021-05563-5 ↗
30. Fabrication of metal oxides occluded in ordered mesoporous hosts via a solid-state grinding route : the influence of host-guest interactions10.1002/adfm.200500613 ↗
31. Studying the pulverization mechanism of rubber with a modified design of the solid-state shear extrusion process10.1002/app.32643 ↗
32. Studies of the surface wettability and hydrothermal stability of methyl-modified silica films by FT-IR and Raman spectra10.1016/j.vibspec.2008.09.016 ↗
33. Preparation and characterization of high content paraffin wax microcapsules and micro/nanocapsules with poly methyl methacrylate shell by suspension-like polymerization10.1002/cjoc.201600631 ↗
34. The effect of van der Waals interactions on the properties of intrinsic defects in graphite10.1016/j.carbon.2010.07.029 ↗
35. Improvement of thermal conductivity of paraffin by adding expanded graphite10.1177/0021998315612535 ↗
36. Expanded graphite (EG) as a potential filler in the reduction of percolation threshold of multiwall carbon nanotubes (MWCNT) in the PMMA/HDPE/EG/MWCNT nanocomposites10.1002/pc.23385 ↗
37. Azelaic acid/expanded graphite composites with high latent heat storage capacity and thermal conductivity at medium temperature10.1021/acsomega.1c00265 ↗