Sodium control in Ultrathin Cu(In,Ga)Se2 solar cells on transparent back contact for efficiencies beyond 12%
Source abstract
Abstract
Ultrathin Cu(In,Ga)Se 2 (CIGSe) solar cells on transparent conductive oxide (TCO) back contacts combine advantages of ultrathin cells for reducing material consumption of rare indium and gallium and TCO-transparency benefited applications in tandems, bifacial configurations etc. However, their efficiencies are still limited and the back barrier potential is a primary reason from an electrical perspective. In this work, we explore the effects of Nadoping by post deposition treatment (PDT) on the performance of ultrathin CIGSe solar cells on ITO (Sn:In 2O 3 )-coated Na-free glass substrates. Na doping enhances not only the open circuit-voltage ( V oc) by increasing the doping level, but also the fill factor ( FF ) by switching the Schottky contact to an Ohmic contact at the CIGSe/ITO interface, which we propose is due to the increased recombination at the back interface. The optimum performance is achieved at a NaF dose of 2 mg with a top efficiency of 12.9%, which exhibits an enhancement by nearly 48% relative compared to the references without Na doping. To our best knowledge, this is the highest efficiency achieved for ultrathin cells (<500 nm absorber thickness) on TCO without additional antireflection or back reflecting layer. Therefore, the results show that sodium control offers a solid basis for the development of ultrathin CIGSe cells on TCO in above-mentioned promising applications.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Rear point contact structures for performance enhancement of semi-transparent ultrathin Cu(In,Ga)Se2 solar cells10.1016/j.solmat.2019.03.025 ↗
2. Optoelectronic enhancement of ultrathin CuIn1-xGaxSe2Solar cells by nanophotonic contacts10.1002/adom.201600637 ↗
3. Flexible and semi‐transparent ultra‐thin CIGSe solar cells prepared on ultra‐thin glass substrate: a key to flexible bifacial photovoltaic applications10.1002/adfm.202001775 ↗
4. Performance and uniformity improvement in ultrathin Cu(in,Ga)Se2 solar cells with a WOx nano-interlayer at the absorber/transparent back-contact interface10.1021/acsami.8b15930 ↗
5. The role of NaF post-deposition treatment on the photovoltaic characteristics of semitransparent ultrathin Cu(In,Ga)Se2 solar cells prepared on indium-tin-oxide back contacts: a comparative study10.1039/C9TA06274B ↗
6. Backwall superstrate configuration for ultrathin Cu(In,Ga)Se2 solar cells10.1063/1.4862651 ↗
7. Novel device structure for Cu(In,Ga)Se2 thin film solar cells using transparent conducting oxide back and front contacts10.1016/j.solener.2004.08.010 ↗
8. Improved performance of ultrathin Cu(InGa)Se2 solar cells with a backwall superstrate configuration10.1109/JPHOTOV.2014.2345436 ↗
9. Efficiency increased to 15.2% for ultra-thin Cu(In,Ga)Se2 solar cells
10. Cd-free Cu(in,Ga)(Se,S)2 thin-film solar cell with record efficiency of 23.35%10.1109/JPHOTOV.2019.2937218 ↗
11. Structure and interface chemistry of MoO3 back contacts in Cu(In,Ga)Se2 thin film solar cells10.1063/1.4862404 ↗
12. Effects of Na on the electrical and structural properties of CuInSe210.1063/1.370534 ↗
13. Efficiency enhancement of Cu(In,Ga)Se2 solar cells due to post-deposition Na incorporation10.1063/1.1646758 ↗
14. Copper indium gallium selenide based solar cells – a review10.1039/C7EE00826K ↗
15. Cu(In,Ga)Se2 superstrate solar cells: prospects and limitations10.1002/pip.2536 ↗
16. Effects of sodium on polycrystalline Cu(in,Ga)Se2 and its solar cell performance10.1002/(SICI)1521-4095(199801)10:1<31::AID-ADMA31>3.0.CO;2-3 ↗
17. Microstructural and diffusion properties of CIGS thin film solar cells fabricated using transparent conducting oxide back contacts10.1016/j.tsf.2004.11.142 ↗
18. Control of structural and electrical properties of indium tin oxide (ITO)/Cu(in,Ga)Se2 interface for transparent back-contact applications10.1021/acs.jpcc.8b11149 ↗
19. Enhanced performance of ultra-thin Cu(In,Ga)Se 2 solar cells deposited at low process temperature10.1016/j.solmat.2014.08.045 ↗
20. Effect of Na presence during CuInSe2 growth on stacking fault annihilation and electronic properties10.1063/1.4933305 ↗
21. Annihilation of structural defects in chalcogenide absorber films for high-efficiency solar cells10.1039/C6EE00402D ↗
22. Phototransport properties of CuInSe2 thin films: the influence of Na and planar defects10.1103/PhysRevApplied.14.024005 ↗
23. Sze · 2007
24. Addressing the impact of rear surface passivation mechanisms on ultra-thin Cu(In,Ga)Se 2 solar cell performances using SCAPS 1-D model10.1016/j.solener.2017.08.055 ↗
25. Trap-assisted recombination for ohmic-like contact at p-type Cu(In,Ga)Se2/back n-type TCO interface in superstrate-type solar cell10.1063/1.4959210 ↗
26. Modelling polycrystalline semiconductor solar cells10.1016/S0040-6090(99)00825-1 ↗
27. Defects in Cu(in,Ga)Se2 chalcopyrite semiconductors: a comparative study of material properties, defect states, and photovoltaic performance10.1002/aenm.201100344 ↗
28. S-shaped current–voltage characteristics in solar cells: a review10.1109/JPHOTOV.2019.2930409 ↗
29. Development of rear surface passivated Cu(In,Ga)Se2 thin film solar cells with nano-sized local rear point contacts10.1016/j.solmat.2013.07.025 ↗
30. Thin-film solar cells: device measurements and analysis10.1002/pip.518 ↗
31. Verification of phototransistor model for Cu(In,Ga)Se 2 solar cells10.1016/j.tsf.2014.09.025 ↗
32. Scheer · 2011 · vol. 12 · 69469