On the origin of spectrally selective high solar absorptance of TiB2-based tandem absorber with double layer antireflection coatings
Source abstract
Abstract
Abstract Despite significant efforts in developing tandem ceramic coatings for photo-thermal conversion applications, the underlying physics behind spectrally selective high absorptance and thermal stability of the ceramic absorbers remains to be addressed. In this perspective, TiB2/Ti(B,N)/SiON/SiO2 and Ti/TiB2/Ti(B,N)/SiON/SiO2 films were developed on stainless steel substrates (SS 304) using pulsed direct current and radio frequency magnetron sputtering. The addition of double layer antireflection coating not only increases the solar absorptance, but also the thermal stability of the tandem absorber. The amorphous coatings exhibit a high solar absorptance of 0.981 at room temperature and an acceptable thermal emissivity of 0.15 at 82 °C. Variable angle spectroscopic ellipsometry analysis reveals a gradient in the refractive indices of the individual layers from the substrate to the top surface. The coatings with and without titanium interlayer were found to be stable for 2 h in air up to 450 °C and 400 °C, respectively. Under vacuum, the coatings exhibited good thermal stability up to 250 h at 500 °C. We make an attempt to explain the high absorptance of the tandem absorber in terms of the composition and gradient in refractive indices across the stack.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Solar Thermal and Photovoltaic Systems · Thermal Radiation and Cooling Technologies · Optical Coatings and Gratings
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (65)
Show source-provided references
1. Solar energy absorption mediated by surface plasma polaritons in spectrally selective dielectric-metal-dielectric coatings: a critical review10.1016/j.rser.2017.05.062 ↗
2. Concentrated solar power plants: review and design methodology10.1016/j.rser.2013.01.032 ↗
3. Innovation in concentrated solar power10.1016/j.solmat.2011.05.020 ↗
4. Review of mid-to high-temperature solar selective absorber materials
5. Solar energy materials10.1002/adma.200300378 ↗
6. Growth, characterization and performance evaluation of Ti/AlTiN/AlTiON/AlTiO high temperature spectrally selective coatings for solar thermal power applications10.1016/j.solmat.2014.07.037 ↗
7. MoSi2–Si3N4 absorber for high temperature solar selective coating10.1016/j.solmat.2016.04.001 ↗
8. Enhancing spectrally selective response of W/WAlN/WAlON/Al2O3–Based nanostructured multilayer absorber coating through graded optical constants10.1016/j.solmat.2017.11.013 ↗
9. Tantalum carbide based spectrally selective coatings for solar thermal absorber applications10.1016/j.solmat.2019.04.016 ↗
10. A design of selective solar absorber for high temperature applications10.1016/j.solener.2018.04.052 ↗
11. Nanometre optical coatings based on strong interference effects in highly absorbing media10.1038/nmat3443 ↗
12. Optical thin-film materials with low refractive index for broadband elimination of Fresnel reflection10.1038/nphoton.2007.26 ↗
13. Applications of thin graded-index films to solar absorbers10.1364/AO.16.001438 ↗
14. Suitability of ultra-refractory diboride ceramics as absorbers for solar energy applications10.1016/j.solmat.2012.10.004 ↗
15. Compositional dependence of optical properties of zirconium, hafnium and tantalum carbides for solar absorber applications10.1016/j.solener.2016.02.045 ↗
16. UHTCs: ultra-high temperature ceramic materials for extreme environment applications10.1149/2.F04074IF ↗
17. Optical characterization of TiAlNx/TiAlNy/Al2O3 tandem solar selective absorber coatings10.1016/j.solmat.2017.06.007 ↗
18. Spectrally selective NbAlN/NbAlON/Si3N4 tandem absorber for high-temperature solar applications10.1016/j.solmat.2007.11.004 ↗
19. Structure, optical properties and thermal stability of pulsed sputter deposited high temperature HfOx/Mo/HfO2 solar selective absorbers10.1016/j.solmat.2010.04.073 ↗
20. Process‐structure‐reflectance correlations for TiB2 films prepared by chemical vapor deposition10.1111/j.1151-2916.1999.tb01794.x ↗
21. Titanium diboride ceramics for solar thermal absorbers10.1016/j.solmat.2017.05.038 ↗
22. Shifting of the absorption edge in TiB2/TiB (N)/Si3N4 solar selective coating for enhanced photothermal conversion10.1016/j.solener.2018.07.002 ↗
23. Structure, thermal stability and chromaticity investigation of TiB2 based high temperature solar selective absorbing coatings10.1016/j.solener.2019.01.068 ↗
24. Controlling the boron-to-titanium ratio in magnetron-sputter-deposited TiBx thin films10.1116/1.4982649 ↗
25. Electronic and bonding properties of TiB210.1016/j.jallcom.2006.08.056 ↗
26. Optimization of W/WAlSiN/SiON/SiO2 tandem absorber consisting of double layer anti-reflection coating with broadband absorption in the solar spectrum region10.1016/j.apsusc.2019.143651 ↗
27. Formation of TiB2 coatings at room temperature by dynamic ion mixing10.1016/S0257-8972(95)02752-1 ↗
28. Chemical, mechanical, and tribological properties of pulsed‐laser‐deposited titanium carbide and vanadium carbide10.1111/j.1151-2916.1997.tb02976.x ↗
29. XPS study of reactively sputtered Ti–B–N hard coatings10.1002/1096-9918(200012)29:12<823::AID-SIA933>3.0.CO;2-C ↗
30. An XPS study of the adherence of refractory carbide silicide and boride rf‐sputtered wear‐resistant coatings10.1116/1.569845 ↗
31. Relationship between composition, bonding constitution and microstructure in unbalanced magnetron sputtered Ti–B–N thin films10.1179/174329407X215339 ↗
32. XPS study of thin films of titanium oxysulfides10.1016/0039-6028(91)90640-E ↗
33. Wagner · 2003 · vol. 3 · 251
34. Characterization of silicon oxynitride thin films by x-ray photoelectron spectroscopy10.1116/1.582038 ↗
35. Optical, structural, and mechanical properties of silicon oxynitride films prepared by pulsed magnetron sputtering10.1364/AO.56.00C168 ↗
36. Raman spectroscopy: recent advancements, techniques and applications10.1016/j.vibspec.2011.08.003 ↗
37. Sequence of phase evolution during mechanically induced self-propagating reaction synthesis of TiB and TiB2 via magnetically controlled ball milling of titanium and boron powders10.1016/j.jallcom.2017.01.016 ↗
38. Vibrational spectroscopy of binary titanium borides: first-principles and experimental studies
39. Tuschel · 2017
40. Raman scattering investigation of nanocrystalline δ-TiNx synthesized by solid-state reaction10.1016/j.jallcom.2005.11.017 ↗
41. Titania polymorphs derived from crystalline titanium diboride10.1039/b909191m ↗
42. Optimization and analysis of solar selective surfaces with continuous and multilayer profiles10.1063/1.359124 ↗
43. Fujiwara · 2007
44. Cheney · 2012
45. Optical properties and electronic structure of amorphous germanium10.1002/pssb.19660150224 ↗
46. Spectroscopic ellipsometry characterization of thin-film silicon nitride10.1016/S0040-6090(97)00816-X ↗
47. Cao · 2014
48. Angular solar absorptance and thermal stability of W/WAlN/WAlON/Al2O3-based solar selective absorber coating10.1016/j.applthermaleng.2016.04.069 ↗
49. Very low‐emittance solar selective surfaces using new film structures10.1063/1.351510 ↗
50. Tilley · 2020
51. Anti-reflective coatings: a critical, in-depth review10.1039/c1ee01297e ↗
52. Enhancement of absorption and color contrast in ultra-thin highly absorbing optical coatings10.1063/1.4820147 ↗
53. Comparative study of the electronic structure, phonon spectra, and electron-phonon interaction of ZrB 2 and TiB 210.1103/PhysRevB.87.064305 ↗
54. Electronic structure, bonding, and ground-state properties of AlB 2-type transition-metal diborides10.1103/PhysRevB.63.045115 ↗
55. Electronic structure and elastic properties of TiB2 and ZrB210.1016/j.commatsci.2012.03.055 ↗
56. Electron structure of diborides of 3d metals10.1063/1.593361 ↗
57. Reactively sputtered Ti–B–N nanocomposite films: correlation between structure and optical properties10.1016/S0040-6090(02)00071-8 ↗
58. The growth of hexagonal boron nitride thin films on silicon using single source precursor10.1016/S0040-6090(97)01007-9 ↗
59. Optical properties of (oxy) nitride materials: a review10.1111/jace.12197 ↗
60. Solid solution of GaN and ZnO as a stable photocatalyst for overall water splitting under visible light10.1021/cm901917a ↗
61. Deposition and composition of silicon oxynitride films10.1116/1.582543 ↗
62. Refractive index of sputtered silicon oxynitride layers for antireflection coating10.1016/S0042-207X(01)00124-5 ↗
63. Porous SiO2 films prepared by remote plasma-enhanced chemical vapour deposition–a novel antireflection coating technology for photovoltaic modules10.1016/S0927-0248(00)00079-9 ↗
64. Microstructural characterization of ion assisted SiO 2 thin films by visible and infrared ellipsometry10.1116/1.581341 ↗
65. Twenty‐four percent efficient silicon solar cells with double layer antireflection coatings and reduced resistance loss10.1063/1.114124 ↗