In-situ phosphorus-doped polysilicon prepared using rapid-thermal anneal (RTA) and its application for polysilicon passivated-contact solar cells
Source abstract
Abstract
Abstract A rapid thermal anneal (RTA) is used to crystallize the plasma-enhanced chemical vapor deposition (PECVD) deposited hydrogenated amorphous silicon (a-Si:H) thin film to form the phosphorus-doped polysilicon passivated contact in tunnel oxide passivated contact (TOPCon) solar cells. The effects of annealing temperature, annealing time, cooling time, and the polysilicon thickness on the surface passivation are investigated. The primary advantage of the RTA is reducing the whole crystallization period to ~15 min, shorter than the conventional tube-furnace annealing period of >60 min. We find that the RTA is a robust method to prepare high-quality polysilicon passivated contact without introducing blistering when the thickness of the a-Si:H is less than 40 nm. The optimized RTA process leads to an implied open-circuit voltage (iVoc) of 712 mV and a single-sided dark saturation current density (J0,s) of 12.5 fA/cm2 in the as-annealed state, which is inferior to the surface passivation of the controlled one prepared by a tube furnace annealing. Fortunately, a subsequent Al2O3 capping hydrogenation improves the iVoc and J0,s to 727 mV and 4.7 fA/cm2, respectively. The champion conversion efficiency of 23.04% (Voc = 679.0 mV, Jsc = 41.97 mA/cm2 and FF = 80.86%) is achieved, which demonstrates the effectiveness of RTA for preparing a high-efficiency polysilicon passivated-contact solar cell.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Silicon Nanostructures and Photoluminescence
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. A passivated rear contact for high-efficiency n-type silicon solar cells enabling high Vocs and FF 82%
2. n-Type Si solar cells with passivating electron contact: identifying sources for efficiency limitations by wafer thickness and resistivity variation10.1016/j.solmat.2017.05.042 ↗
3. A simple method for pinhole detection in carrier selective POLO-junctions for high efficiency silicon solar cells10.1016/j.solmat.2017.05.041 ↗
4. Approaching 23% with large‐area monoPoly cells using screen‐printed and fired rear passivating contacts fabricated by inline PECVD
5. Mass production of industrial tunnel oxide passivated contacts (i‐TOPCon) silicon solar cells with average efficiency over 23% and modules over 345 W10.1002/pip.3180 ↗
6. Ion implantation for poly-Si passivated back-junction back-contacted solar cells10.1109/JPHOTOV.2014.2382975 ↗
7. A passivating contact for silicon solar cells formed during a single firing thermal annealing10.1038/s41560-018-0239-4 ↗
8. Thermally assisted flash annealing of silicon and germanium10.1063/1.90528 ↗
9. Effects of rapid thermal annealing on nitrided gate oxide grown on 4H-SiC10.1016/j.mee.2005.10.027 ↗
10. IBC c-Si solar cells based on ion-implanted poly-silicon passivating contacts10.1016/j.solmat.2016.05.041 ↗
11. 18% efficient silicon photovoltaic devices by rapid thermal diffusion and oxidation10.1109/16.704369 ↗
12. Rapid thermal technologies for high-efficiency silicon solar cells10.1016/S0927-0248(02)00047-8 ↗
13. n-Type polysilicon passivating contact for industrial bifacial n-type solar cells10.1016/j.solmat.2016.06.034 ↗
14. Polycrystalline silicon films fabricated by rapid thermal annealing10.1007/s10854-012-0786-6 ↗
15. Effect of the SiO2 interlayer properties with solid-source hydrogenation on passivated contact performance and surface passivation
16. UV-Raman scattering of thin film Si with ultrathin silicon oxide tunnel contact for high efficiency crystal silicon solar cells10.1016/j.solmat.2018.12.025 ↗
17. Determination of Si-SiO2 interface recombination parameters using a gate-controlled point-junction diode under illumination10.1109/16.2441 ↗
18. Advanced diffusion system for low contamination thermal processing of silicon solar cells10.1016/S0927-0248(02)00045-4 ↗
19. An examination of three common assumptions used to simulate recombination in heavily doped silicon
20. Carrier population control and surface passivation in solar cells10.1016/j.solmat.2018.04.026 ↗
21. Numerical exploration for structure design and free-energy loss analysis of the high-efficiency polysilicon passivated-contact p-type silicon solar cell10.1016/j.solener.2018.12.044 ↗
22. Study of pinhole conductivity at passivated carrier-selected contacts of silicon solar cells10.1016/j.egypro.2016.07.040 ↗
23. Carrier transport through the ultrathin silicon-oxide layer in tunnel oxide passivated contact (TOPCon) c-Si solar cells10.1016/j.solmat.2018.07.025 ↗
24. Effective gettering of in-situ phosphorus-doped polysilicon passivating contact prepared using plasma-enhanced chemical-vapor deposition technique10.1016/j.solmat.2019.110256 ↗
25. Passivation properties of tunnel oxide layer in passivated contact silicon solar cells10.1016/j.apsusc.2017.02.195 ↗
26. Application of a-Si/μc-Si hybrid layer in tunnel oxide passivated contact n-type silicon solar cells10.1016/j.solener.2017.01.061 ↗
27. Computational analysis of a high-efficiency tunnel oxide passivated contact (TOPCon) solar cell with a low-work-function electron-selective-collection layer10.1016/j.solener.2018.06.008 ↗