Liquid Metal Gallium in Metal Inserts for Solar Thermal Energy Storage: A Novel Heat Transfer Enhancement Technique
Source abstract
Abstract
Abstract This paper investigates the heat transfer characteristics of a prototype latent heat energy storage (LHES) system with novel metal insert design configuration. The novel thermal energy storage (TES)system consist ofa vertical cylindrical shell, a helical coil and metalinserts (MI) withliquid metal gallium(Ga), designed for LHES capacity of ~13MJ. 25 kg of D-Mannitol(DM) is investigated as a phase change material (PCM) forenergy storage and property tests were conducted on DM. PCM was cycled 1000 times and checked for suitability for long term energy storage applications. Results confirmed that the addition of MI with Ga enhanced the thermal performance of the TES system. Moreover, the vertical orientation of the shell as well as the metal inserts supported natural convection during charging cycles and acted as a nucleation sites during discharging cycles, thereby assuring rapid charging and discharging of the TES system. High thermal conductivity, low specific heat of Ga and its liquid phase atroom temperatures helped Ga act as thermal energy carriers in TES unit. Maximum power output of 0.64 kW was obtained during solidification cycle and efficiency range of 87–89% for MI configuration. The presented novel LHES design can be used with a wide range of PCM and over a different temperature range of applications, mainly for water heating, high temperature industrial waste heat recovery and solar thermal applications.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Phase Change Materials Research · Solar Thermal and Photovoltaic Systems · Adsorption and Cooling Systems
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Phase change materials for thermal energy storage10.1016/j.pmatsci.2014.03.005 ↗
2. Review on nanoencapsulated phase change materials: preparation, characterization and heat transfer enhancement10.1016/j.nanoen.2015.02.016 ↗
3. Preparation and effectiveness of composite phase change material for performance improvement of Open Graded Friction Course10.1016/j.jclepro.2019.01.001 ↗
4. Miro · 2016 · vol. 179 · 284
5. Research on the application of phase-change heat storage in centralized solar hot water system10.1016/j.jclepro.2018.06.281 ↗
6. Encapsulated phase change materials for energy storage - characterization by calorimetry10.1016/j.solener.2012.10.003 ↗
7. Modeling and investigation of high temperature phase change materials (PCM) in different storage tank configurations10.1016/j.jclepro.2017.05.171 ↗
8. An experimental study on heat transfer characteristics of paraffin wax in horizontal double pipe heat latent heat storage unit10.1016/j.jtice.2014.03.007 ↗
9. Thermal conductivity enhancement of phase change materials with form-stable carbon bonded carbon fiber network10.1016/j.matdes.2018.01.052 ↗
10. Materials and system requirements of high temperature thermal energy storage systems: A review. Part 2: Thermal conductivity enhancement techniques10.1016/j.rser.2016.03.019 ↗
11. Materials and system requirements of high temperature thermal energy storage systems : a review . Part 2 : thermal conductivity enhancement techniques10.1016/j.rser.2016.03.019 ↗
12. Energy storage performance of pentaerythritol blended with indium in exhaust heat recovery application10.1016/j.tca.2019.178343 ↗
13. A review of microencapsulation methods of phase change materials (PCMs) as a thermal energy storage (TES) medium10.1016/j.rser.2013.12.033 ↗
14. Thermal performance of micro-encapsulated PCM with LMA thermal percolation in TES based heat sink application10.1016/j.enconman.2019.01.080 ↗
15. Thermal conductivity and latent heat thermal energy storage characteristics of paraffin/expanded graphite composite as phase change material10.1016/j.applthermaleng.2006.11.004 ↗
16. Numerical heat transfer studies of a latent heat storage system containing nano-enhanced Phase Change Material10.2298/TSCI100412060R ↗
17. Numerical investigations of unconstrained melting of nano-enhanced phase change material (NEPCM) inside a spherical container10.1016/j.ijthermalsci.2011.08.006 ↗
18. Numerical study of melting inside concentric and eccentric horizontal annulus10.1016/j.apm.2011.11.033 ↗
19. Numerical and experimental study on the solidification of PCM around a vertical axially finned isothermal cylinder10.1016/S1359-4311(00)00002-8 ↗
20. Experimental and computational evolution of a shell and tube heat exchanger as a PCM thermal storage system10.1016/j.icheatmasstransfer.2013.11.008 ↗
21. Numerical analysis of latent heat thermal energy storage system10.1016/j.enconman.2006.12.013 ↗
22. Numerical analysis of the thermal behaviour of a shell-and-tube heat storage unit using phase change materials10.1016/j.apm.2008.05.016 ↗
23. Experimental evaluation at pilot plant scale of multiple PCMs (cascaded) vs. single PCM configuration for thermal energy storage10.1016/j.renene.2015.05.029 ↗
24. Analysis of geometrical and operational parameters of PCM in a fin and tube heat exchanger10.1016/j.icheatmasstransfer.2014.02.025 ↗
25. Numerical study on geometrical specifications and operational parameters of multi-tube heat storage systems10.1016/j.applthermaleng.2016.08.083 ↗
26. Experimental investigations of charging/melting cycles of paraffin in a novel shell and tube with longitudinal fins based heat storage design solution for domestic and industrial applications10.1016/j.apenergy.2017.10.043 ↗
27. An experimental investigation of discharge/solidification cycle of paraffin in novel shell and tube with longitudinal fins based latent heat storage system10.1016/j.enconman.2017.10.051 ↗
28. Performance investigation of a lab–scale latent heat storage prototype – numerical results10.1016/j.enconman.2016.12.075 ↗
29. Natural Magnetite for thermal energy storage: excellent thermophysical properties, reversible latent heat transition and controlled thermal conductivity10.1016/j.solmat.2016.12.006 ↗
30. Preparation of erythritol-graphite foam phase change composite with enhanced thermal conductivity for thermal energy storage applications10.1016/j.carbon.2015.06.075 ↗
31. Characterization of different sugar alcohols as phase change materials for thermal energy storage applications10.1016/j.solmat.2016.10.009 ↗
32. Health hazard, cycling and thermal stability as key parameters when selecting a suitable phase change material (PCM)10.1016/j.tca.2016.01.014 ↗
33. Stability of sugar alcohols as PCM for thermal energy storage10.1016/j.solmat.2014.03.020 ↗
34. Liquid metal gallium laden organic phase change material for energy storage: an experimental study10.1016/j.ijhydene.2017.12.047 ↗