Effect of the fabrication process on the thermophysical properties of Ca(NO3)2–NaNO3/expanded graphite phase change material composites
Source abstract
Abstract
Abstract Studying the influence of various fabrication steps on the thermophysical properties of the shape-stable phase change materials (SSPCMs) is pivotal to adjust the thermophysical properties of the PCM/expanded graphite (EG) SSPCMs. In light of this, three kinds of PCM samples involving different fabrication steps (impregnation, cold-compression and sintering) were fabricated and characterized, to investigate the effects of the different fabrication steps and molar ratios of the Ca(NO3)2–NaNO3 binary salts on the microstructure and some thermal properties of the SSPCMs. The results show that the cold-compression and sintering led to a quite compact arrangement of EG regions separated by salt particles, which constrained the Ca(NO3)2 crystal arrangement and orientation of nitrate molecular chains within the mesopores of EG. As a result, two overlapped or convoluted DSC peaks, instead of one peak, and a wider melting temperature range appeared during the melting process of the SSPCMs when the Ca(NO3)2 M ratio was no less than that of the eutectic binary salt. The cold-compression and sintering also caused evident increases of the melting temperature range, reductions of the phase change enthalpy by 21–23%, and significant increases of the thermal conductivities of the SSPCMs by over 2.5 times from 1.56 to 1.9 to 5.02–6.27 W/(m ⋅ K). The cold-compression and sintering are suggested to be employed in the fabrications of the SSPCMs to establish a better conductive passageway and surge the energy storage density.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Phase Change Materials Research · Solar Thermal and Photovoltaic Systems · Adsorption and Cooling Systems
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Review on thermal energy storage with phase change materials and applications10.1016/j.rser.2007.10.005 ↗
2. A review of the composite phase change materials: fabrication, characterization, mathematical modeling and application to performance enhancement10.1016/j.apenergy.2015.12.043 ↗
3. Dynamic thermal performance analysis of a molten-salt packed-bed thermal energy storage system using PCM capsules10.1016/j.apenergy.2014.01.085 ↗
4. Effective thermal conductivity of open-cell metal foams impregnated with pure paraffin for latent heat storage10.1016/j.ijthermalsci.2014.03.006 ↗
5. A comparative study of thermal behavior of a horizontal and vertical shell-and-tube energy storage using phase change materials10.1016/j.applthermaleng.2015.09.107 ↗
6. Thermal behavior of porous stainless-steel fiber felt saturated with phase change material10.1016/j.energy.2013.02.064 ↗
7. Improvement of the corrosion properties in ternary molten nitrate salts for direct energy storage in CSP plants10.1016/j.solener.2016.05.030 ↗
8. Review of mid-to high-temperature solar selective absorber materials
9. A study of a eutectic salt of lithium nitrate and sodium chloride (87-13%) for latent heat storage10.1016/j.solmat.2017.04.016 ↗
10. Experimental study on thermal properties and thermal performance of eutectic hydrated salts/expanded perlite form-stable phase change materials for passive solar energy utilization10.1016/j.solmat.2018.08.012 ↗
11. Experiment study on the thermal properties of paraffin/kaolin thermal energy storage form-stable phase change materials10.1016/j.apenergy.2016.08.147 ↗
12. Synthesis and characterization of lauric acid/expanded vermiculite as form-stabilized thermal energy storage materials10.1016/j.enbuild.2016.01.023 ↗
13. Thermal property characterization of a low melting-temperature ternary nitrate salt mixture for thermal energy storage systems10.1016/j.solmat.2011.07.029 ↗
14. Thermodynamic modeling of the Ca(NO3)2-MNO3 (M: alkali metal) systems10.1016/j.calphad.2017.08.004 ↗
15. Selection principles and thermophysical properties of high temperature phase change materials for thermal energy storage: a review
16. Thermal conductivity of molten salts, HTS and the lithium nitrate-sodium nitrate system, using a modified transient hot-wire method10.1021/je00035a001 ↗
17. Measurement of the thermal conductivity of molten KNO3 and NaNO3 by the transient hot-wire method with ceramic-coated probes
18. Preparation of binary eutectic chloride/expanded graphite as high-temperature thermal energy storage materials10.1016/j.solmat.2015.12.038 ↗
19. Molten salts as engineering fluids – a review10.1016/j.apenergy.2016.09.003 ↗
20. Experimental study on a novel form-stable phase change materials based on diatomite for solar energy storage10.1016/j.solmat.2018.03.016 ↗
21. Study on a PEG/epoxy shape-stabilized phase change material: preparation, thermal properties and thermal storage performance10.1016/j.ijheatmasstransfer.2018.05.153 ↗
22. Preparation and characterization of KNO3/diatomite shape-stabilized composite phase change material for high temperature thermal energy storage10.1016/j.jmst.2016.02.011 ↗
23. Research on the preparation and properties of lauric acid/expanded perlite phase change materials10.1016/j.enbuild.2015.10.043 ↗
24. Preparation and characterization of capric-myristic-stearic acid eutectic mixture/modified expanded vermiculite composite as a form-stable phase change material10.1016/j.apenergy.2016.06.109 ↗
25. Experimental and numerical study on the effective thermal conductivity of paraffin/expanded graphite composite10.1016/j.solmat.2014.06.023 ↗
26. Preparation, characterization and thermal properties of binary nitrate salts/expanded graphite as composite phase change material10.1016/j.tca.2014.04.021 ↗
27. Preparation and thermal properties of porous heterogeneous composite phase change materials based on molten salts/expanded graphite10.1016/j.solener.2014.05.019 ↗
28. Preparation and thermal properties of polyethylene glycol/expanded graphite as novel form-stable phase change material for indoor energy saving10.1016/j.matlet.2018.01.025 ↗
29. Thermal characterization of nitrates and nitrates/expanded graphite mixture phase change materials for solar energy storage10.1016/j.enconman.2013.04.007 ↗
30. KNO3/NaNO3 -Graphite materials for thermal energy storage at high temperature: Part I. -Elaboration methods and thermal properties10.1016/j.applthermaleng.2010.03.013 ↗
31. KNO3/NaNO3 -graphite materials for thermal energy storage at high temperature: part II. -Phase transition properties10.1016/j.applthermaleng.2010.03.014 ↗
32. The shape-stabilized phase change materials composed of polyethylene glycol and various mesoporous matrices (AC, SBA-15 and MCM-41)
33. Thermal characteristics of expanded perlite/paraffin composite phase change material with enhanced thermal conductivity using carbon nanotubes10.1016/j.enconman.2016.12.053 ↗
34. Ca(NO3)2-NaNO3/expanded graphite composite as a novel shape-stable phase change material for mid-to high-temperature thermal energy storage10.1016/j.enconman.2018.02.057 ↗
35. Ca(NO3)2-NaNO3-KNO3 molten salt mixtures for direct thermal energy storage systems in parabolic trough plants10.1115/1.4023182 ↗
36. Investigation of the Ca(NO3)2-NaNO3 mixture for latent heat storage10.1016/j.solmat.2015.04.005 ↗
37. Synergistic enhancement of thermal conductivity for expanded graphite and carbon fiber in paraffin/EVA form-stable phase change materials10.1016/j.solener.2016.01.011 ↗