Bifacial, fully screen-printed n-PERT solar cells with BF2 and B implanted emitters
Source abstract
Abstract
Abstract For boron implants made with ion implanters designed for PV applications, a variety of ion species BF x ( x =0.2) is implanted, while BF 2 accounts for the lions share. We investigate the impact of the BF 2 implantation dose and the annealing conditions on the resulting electrical characteristics of industrial bifacial n -type PERT solar cells. For an annealing temperature of 950 °C, we observe a steep increase in the emitter saturation current density for BF 2 implant doses above 1.75×10 15 cm −2 . We compare co-annealed BF 2 - and B-implanted solar cells and achieve maximum energy conversion efficiencies of 20.6% with BF 2 and 21.0% with B, respectively. Separate annealing processes for the p + and n + doped regions result in even higher energy conversion efficiencies of 20.8% with BF 2 and 21.5% with B emitter implant. An optimized double-layer ARC applied on the separately annealed cells further increases the efficiency up to 20.9% for BF 2 and up to 21.8% for B emitter implant. All efficiency values are independently confirmed. The solar cells have bifacial factors between 97.3% and 99.4%. The BF 2 -implanted solar cells with highest efficiency feature an emitter with a sheet resistance of 180 Ω/sq. contacted by a commercially available Ag/Al paste with specific contact resistance of less than 10 mΩ cm 2 .
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Semiconductor materials and interfaces · Advancements in Battery Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. C.B. Mo, S.J. Park, Y.J. Kim, D.J. Lee, S.C. Park, D.S. Kim, S.B. Kim, J. Graff, M. Sheoran, P. Sullivan, High efficiency back contact solar cell via ion implantation, Proceedings of the 27th EU-PVSEC, Frankfurt, 2012.
2. Bosch Solar Energy: Photovoltaik-Weltrekord: Bosch Solar und ISFH erreichen 5,32 W Spitzenleistung MIT großflächigen ionenimplantierten IBC-Solarzellen, Press Release, 15.08.2013.
3. A. Merkle, R. Peibst, R. Brendel, High efficient fully ion-implanted, co-annealed and laser-structured back junction back contacted solar cells, in: Proceedings of the 29th EU-PVSEC, Amsterdam, 2014.
4. J. Benick, R. Müller, N. Bateman, M. Hermle, Fully implanted n-type PERT solar cells, in: Proceedings of the 27th EU-PVSEC, Frankfurt, 2012.
5. Influence of the boron emitter profile on VOC and JSC losses in fully ion implanted n-type PERT solar cells10.1002/pssa.201431118 ↗
6. Understanding of the annealing temperature impact on ion implanted bifacial n-type solar cells to reach 20.3% efficiency10.1002/pip.2574 ↗
7. Fully ion-implanted and screen-printed 20.2% efficient front junction silicon cells on 239cm2 commercial N-type CZ substrate10.1109/JPHOTOV.2013.2281106 ↗
8. Fully ion implanted and coactivated industrial n-type cells with 20.5% efficiency10.1109/JPHOTOV.2013.2287760 ↗
9. Electrical and structural analysis of crystal defects after high-temperature rapid thermal annealing of highly boron ion-implanted emitters10.1109/JPHOTOV.2014.2365468 ↗
10. V. Bhosle, T. Miller, J. Graff, N. Bateman, Annealing temperature reduction for non-mass analyzed boron implantation, in: Proceedings of the 31st EU-PVSEC, Hamburg, 2015.
11. Ion implantation of boric molecules for silicon solar cells10.1016/j.solmat.2015.05.024 ↗
12. Influence of boron clustering on the emitter quality of implanted silicon solar cells: an atomprobe tomography study
13. Yevgeniya Larinova, Industrial ion implanted, co-annealed and fully screen-printed bifacial n-PERT solar cells with low-doped back-surface fields, preseted at 5th nPV workshop, Konstanz, Germany, 2015.
14. D.E. Kane, R.M. Swanson, Measurement of the emitter saturation current by a contactless photoconductivity decay method, in: Conference Record of the 18th IEEE-PVSC, pp. 578–583, 1985.
15. T. Dullweber, H. Hannebauer, U. Baumann, T. Falcon, K. Bothe, S. Steckemetz, R. Brendel, Fine-line printed 4 busbar PERC solar cells with conversion efficiencies beyond 21%, in: Proceedings of the 29th EU-PVSEC, Amsterdam, 2014.
16. Characteristics of low-energy BF2- or As-implanted layer and their effect on the electrical performance of 0.15-µm MOSFET׳s10.1109/16.661231 ↗
17. Series resistance effects on solar cell measurements10.1016/0365-1789(63)90063-8 ↗
18. F. Kiefer, R. Peibst, J. Krügener, F. Heinemeyer, H.J. Osten, R. Brendel, Structural investigation of printed Ag/Al contacts on silicon and numerical modeling of their contact recombination, submitted to Photovoltaics, J. IEEE.
19. Impact of the phosphorus emitter doping profile on metal contact recombination of silicon wafer solar cells10.1016/j.solmat.2015.12.006 ↗
20. Solar-grade boron emitters by BF3 plasma doping and role of the co-implanted fluorine
21. J.W. Mayer, L. Eriksson, J.A. Davies, Ion Implantation in Semiconductors, New York, 1970.
22. K.R. McIntosh, P.P. Altermatt, A freeware 1D emitter model for silicon solar cells, Conference Record of the 35th IEEE-PVSC, pp. 002.188–002.193, 2010.10.1109/PVSC.2010.5616124 ↗