journal article·2016-03

Towards 20% efficient industrial Al-BSF silicon solar cell with multiple busbars and fine gridlines

Nian Chen, Abasifreke Ebong

Publisher page

Abstract

Abstract This paper reports on modeled and experimental results of industrial aluminum back surface field (Al-BSF) silicon solar cells with 3-, 4- and 5-busbar (3-, 4- and 5-BB). It was found that by keeping the same metal grid coverage, solar cells with 4- and 5-BB gave higher fill factor (FF) and energy conversion efficiency than the state-of-the-art 3-BB. This is attributed to decreased gridline resistance as the number of busbars increases from three to four, and four to five. The experimental I – V data showed an average increase in cell efficiency by 0.41% absolute and 0.66% absolute with 4-BB and 5-BB cells, respectively, compared to the 3-BB counterparts. By using the production emitter and commercial size of 239 cm 2 , best efficiency of ~19.94% was achieved for a 5-BB Al-BSF cell.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Semiconductor materials and interfaces · solar cell performance optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. Grid parity: a potentially misleading concept
2. Global overview on grid-parity10.1002/pip.1254 ↗
3. A. Ebong, N. Chen, Metallization of crystalline silicon solar cells: a review, In: Proceedings of the 9th International Conference on High Capacity Optical Networks and Enabling Technologies (HONET), 12–14 Dec 2012, pp. 102–109.10.1109/HONET.2012.6421444 ↗
4. Reliable metallization process for ultra fine line printing10.1016/j.egypro.2013.11.091 ↗
5. A. Ebong, I.B. Cooper, K. Tate, B. Rounsaville, F. Zimbardi, V. Upadhyaya, A. Rohatgi, M. Dovrat, E. Kritchman, D. Brusilovsky, A. Benichou. Implementing narrow front silver gridlines through ink jet machine for high quality contacts to silicon solar cells, In: Proceedings of the 37th IEEE Photovoltaic Specialists Conference (PVSC), IEEE, 2011, 2011, pp. 001050–001053.10.1109/PVSC.2011.6186132 ↗
6. Capitalising on the precisions of ion implantation and ink jetted fine gridline to create low-cost high efficiency silicon solar cells10.1016/j.egypro.2013.05.036 ↗
7. A. Ebong, V. Unsur, N. Chen, A. Chowdhury, Understanding the sintering of digital inkjet printed (DIP) contacts to achieve low-contact resistance on silicon solar cells, In: Proceedings of the 1st Africa Photovoltaic Solar Energy Conference and Exhibition, vol. 1, no. 1, 2014, p. 1.
8. Contact resistance: its measurement and relative importance to power loss in a solar cell10.1109/T-ED.1984.21584 ↗
9. Analysis of industrial c-Si solar cell׳s front metallization by advanced numerical simulation10.1002/pip.1148 ↗
10. Y.S. Khoo, T.M. Walsh, A.G. Aberle, Optimizing the Front Electrode of Silicon-Wafer-Based Solar Cells and Modules, 2013, pp. 1–7.10.1109/JPHOTOV.2013.2244161 ↗
11. Burgers · 2005
12. Green · 1981
13. How to design optimal metallization patterns for solar cells10.1002/(SICI)1099-159X(199911/12)7:6<457::AID-PIP278>3.0.CO;2-U ↗
14. H.B. Serreze, Optimizing solar cell performance by simultaneous consideration of grid pattern design and interconnect configurations, In: Proceedings of the 13th Conference Record of the IEEE Photovoltaic Specialists Conference, 1978.
15. Record low Ag paste consumption of 67.7mg with dual print10.1016/j.egypro.2013.11.089 ↗
16. N. Chen, A. Ebong, Investigation of the Optimum Number of Busbars for Cost-effective Industrial Al-BSF Silicon Solar Cell, In: Proceedings of the 24th Workshop on Crystalline Silicon Solar Cells & Modules: Materials and Processes, Breckenridge, Colorado, 27–30 July 2014.
17. N. Chen, A. Chowdury, E. Ahmad, V. Unsur, A. Ebong, Assessing the impact of multi-busbars on metallization cost and efficiency of solar cells with digital inkjet-printed gridlines, In: Proceedings of the 10th International Conference on High Capacity Optical Networks and Enabling Technologies (HONET-CNS), IEEE, 2013, 2013 , pp. 60–65.10.1109/HONET.2013.6729758 ↗
18. Silver contact grid: inferred contact resistivity and cost minimization in 19% silicon solar cells10.1109/JPHOTOV.2012.2217939 ↗
19. Hilali · 2005
20. Generalized analysis of the impact of emitter sheet resistance on silicon solar cell performance10.7567/JJAP.54.08KD20 ↗