The temperature behavior of smart windows under direct solar radiation
Source abstract
Abstract
Abstract The purpose of this paper was to investigate the variation in temperature of electrochromic devices under direct solar radiation and to compare the results with double-glazed glass. The devices consisted of a V2O5 layer as an ion storage film and a WO3 layer as an electrochromic layer. The V2O5 and WO3 films were prepared by thermal and electron beam evaporation, respectively. The optical properties and structures of these films were investigated. Both the ion storage film and the electrochromic layer were amorphous. The optical absorption was caused by a direct-forbidden transition in V2O5 and by an indirect-allowed transition in WO3. The maximum temperatures under solar radiation were measured for colored and bleached devices, double glass and air, they were found to be approximately 63, 63, 53 and 36 °C, respectively. The rates of increasing temperature to the incident power density for colored, bleached devices and double glass were 0.051, 0.049 and 0.041 °C/(W/m2), respectively.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Transition Metal Oxide Nanomaterials · Advanced Memory and Neural Computing · Gas Sensing Nanomaterials and Sensors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. Flexible foils with electrochromic coatings: science, technology and applications10.1016/j.mseb.2004.12.085 ↗
2. Preparation and characterization of electron beam evaporated WO3 thin films10.1016/j.optmat.2005.11.017 ↗
3. Review of electrochromic window performance factors10.1117/12.185373 ↗
4. Effect of switching control strategies on the energy performance of electrochromic windows10.1117/12.185387 ↗
5. Electrochromic coatings for smart windows10.1016/S0039-6028(03)00457-6 ↗
6. J.P. Matthews, Kinetic behaviour of ion intercalation electrodes at elevated temperatures, Ph.D. Thesis, Queensland University of Technology, Australia, 2001.
7. Durability evaluation of electrochromic devices – an industry perspective10.1016/S0927-0248(98)00185-8 ↗
8. Structural properties of V2O5 thin films prepared by vacuum evaporation10.1016/j.mssp.2003.08.017 ↗
9. Photochromic properties of WO3 and WO3:X (X=Ti, Nb, Ta and Zr) thin films10.1016/j.ssi.2003.08.023 ↗
10. Extraction of extinction coefficient of weak absorbing thin films from special absorption10.1088/0022-3727/22/9/024 ↗
11. Optical absorption of Li-intercalated polycrystalline tungsten oxide films: comparison to large polaron theory10.1016/j.ssi.2003.08.017 ↗
12. Optical and electrochemical properties of cerium–zirconium mixed oxide thin films deposited by sol–gel and r.f. sputtering10.1016/S0013-4686(99)00032-8 ↗
13. Correlation between growth conditions, microstructure, and optical properties in pulsed-laser-deposited V2O5 thin films10.1021/cm048507m ↗
14. Structural and optical properties of vanadium pentoxide sol–gel films10.1016/j.tsf.2005.12.264 ↗
15. Structural and optical properties of pulsed laser deposited V2O5 thin films10.1016/j.tsf.2007.08.113 ↗
16. Optical and structural characteristics of sol–gel-deposited tungsten oxide and vanadium-doped tungsten oxide films10.1016/S0927-0248(00)00361-5 ↗
17. Effect of annealing on structural and optical properties of WO3 thin films prepared by electron-beam coating10.1016/j.physb.2006.09.010 ↗
18. Preparation and characterization of electron beam evaporated WO3 thin films10.1016/j.optmat.2005.11.017 ↗
19. Efficiency of Li doping on electrochromic WO3 thin films10.1016/S0040-6090(00)01424-3 ↗
20. Electrochromic tungsten oxide films: review of progress 1993–199810.1016/S0927-0248(99)00088-4 ↗
21. Structures and electrochromic properties of tungsten oxide films prepared by magnetron sputtering10.1016/j.apsusc.2005.03.170 ↗
22. Infrared reflectance modulation in tungsten oxide based electrochromic devices10.1016/S0013-4686(01)00374-7 ↗