Stability study of quinoxaline and pyrido pyrazine based co-polymers for solar cell applications
Source abstract
Abstract
We present two co-polymer families; one based on a thiophene-quinoxaline unit and one on a thiophene-pyrido pyrazine unit. Co-polymerization of these monomers with thiophene-hexylthiophene was performed to create polymers with an optical absorption that fully covers the visible part of the solar spectrum with the aim to enhance the solar cell performances of these polymers. We have also studied how increasing the fraction of thiophene-hexylthiophene affects the photo-oxidative stability of these polymers. Thiophene-pyrido pyrazine solar cells displayed increased device efficiency upon addition of the thiophene-hexylthiophene and, in addition, the stability is retained upon inclusion of these units. In contrast, we found that for the thiophene-quinoxaline based co-polymer, both device efficiency and stability decreased with increasing thiophene-hexylthiophene fraction. Moreover, our results indicate that the photo-oxidative stability of the thiophene-quinoxaline co-polymer is independent of the polymer molecular weight as well as of the film thickness.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Organic Light-Emitting Diodes Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Enhanced power-conversion efficiency in polymer solar cells using an inverted device structure10.1038/nphoton.2012.190 ↗
2. Fullerene derivative-doped zinc oxide nanofilm as the cathode of inverted polymer solar cells with low-bandgap polymer (PTB7-Th) for high performance10.1002/adma.201301476 ↗
3. Fabrication and processing of polymer solar cells: A review of printing and coating techniques
4. Black polymers in bulk-heterojunction solar cells10.1109/JSTQE.2010.2049002 ↗
5. Photophysical properties of C7010.1021/ja00023a041 ↗
6. Efficient methano[70]fullerene/MDMO-PPV bulk heterojunction photovoltaic cells10.1002/anie.200351647 ↗
7. Lifetimes of organic photovoltaics: Using TOF-SIMS and 18O2 isotopic labelling to characterise chemical degradation mechanisms10.1016/j.solmat.2005.03.004 ↗
8. Analysis of the failure mechanism for a stable organic photovoltaic during 10,000h of testing10.1002/pip.794 ↗
9. Stability of the interface between indium-tin-oxide and poly(3,4-ethylenedioxythiophene)/poly(styrenesulfonate) in polymer light-emitting diodes10.1063/1.1315344 ↗
10. Role of ITO and PEDOT:PSS in stability/degradation of polymer:fullerene bulk heterojunctions solar cells10.1016/j.solmat.2009.10.026 ↗
11. Effects of photo-oxidation on the performance of poly[2-methoxy-5-(3′,7′-dimethyloctyloxy)-1,4-phenylene vinylene]:[6,6]-phenyl C61-butyric acid methyl ester solar cells10.1002/adfm.200500714 ↗
12. Degradation of organic solar cells due to air exposure10.1016/j.solmat.2006.06.041 ↗
13. Crystalline Organization of a Methanofullerene as Used for Plastic Solar-Cell Application10.1002/adma.200306372 ↗
14. Photochemical stability of π-conjugated polymers for polymer solar cells: a rule of thumb10.1039/c0jm03105d ↗
15. Stability/degradation of polymer solar cells10.1016/j.solmat.2008.01.005 ↗
16. The mechanism of photo- and thermooxidation of poly(3-hexylthiophene) (P3HT) reconsidered10.1016/j.polymdegradstab.2009.03.005 ↗
17. Stability of n-type doped conjugated polymers and consequences for polymeric microelectronic devices10.1016/S0379-6779(97)80097-5 ↗
18. Air-stable ambipolar organic transistors10.1063/1.2715028 ↗
19. High-performance semiconducting polythiophenes for organic thin-film transistors10.1021/ja039772w ↗
20. Fused thiophene/quinoxaline low band gap polymers for photovoltaic׳s with increased photochemical stability10.1016/j.solmat.2011.07.016 ↗
21. Flexible organic P3HT:PCBM bulk-heterojunction modules with more than 1 year outdoor lifetime10.1016/j.solmat.2008.01.004 ↗
22. Definition of encapsulation barrier requirements: A method applied to organic solar cells10.1016/j.solmat.2011.01.035 ↗
23. Controlled synthesis of conjugated random copolymers in a droplet-based microreactor10.1039/C3MH00066D ↗
24. An easily synthesized blue polymer for high-performance polymer solar cells10.1002/adma.201002225 ↗
25. High-efficiency polymer solar cells with a cost-effective quinoxaline polymer through nanoscale morphology control induced by practical processing additives10.1039/c3ee00110e ↗
26. Interlayer for modified cathode in highly efficient inverted ITO-free organic solar cells10.1002/adma.201104579 ↗
27. New quinoxaline and pyridopyrazine-based polymers for solution-processable photovoltaics10.1016/j.solmat.2012.06.029 ↗
28. Grafting of poly(3-hexylthiophene) brushes on oxides using click chemistry10.1039/B920233A ↗
29. International Standard ASTM E 1171 Requires Thermal Stability Testing of Solar Cells at a Temperature of 85°C
30. Conversion constants for redox potentials measured versus different reference electrodes in acetonitrile solutions at 25°C10.1016/S0020-1693(99)00407-7 ↗
31. Bard · 2001
32. Dielectric function representation by B-splines10.1002/pssa.200777754 ↗
33. Influence of molecular weight on the performance of organic solar cells based on a fluorene derivative10.1002/adfm.201000224 ↗
34. Impact of molecular weight on charge carrier dissociation in solar cells from a polyfluorene derivative10.1016/j.orgel.2009.07.002 ↗
35. Influence of the molecular weight of poly(3-hexylthiophene) on the performance of bulk heterojunction solar cells10.1021/cm047811c ↗
36. Photochemical stability of conjugated polymers, electron acceptors and blends for polymer solar cells resolved in terms of film thickness and absorbance10.1039/c2jm16340c ↗