journal article·2013-10

Characterization of high-efficiency multi-crystalline silicon in industrial production

Xiaohui Tang, Laurent A. Francis, Longfei Gong, Fengzhen Wang, Jean-Pierre Raskin, Denis Flandre, Shuai Zhang, Da You, Liang Wu, Bing Dai

Publisher page

Abstract

A new technique for the directional solidification growth of multi-crystalline silicon (mc-Si) ingot was developed by GCL-POLY Energy Holdings Ltd. This technique is called as S2 and has been used recently for industrial production. The average conversion efficiency of the solar cells fabricated by S2 mc-Si wafers is increased by 0.62% compared with the traditional mc-Si solar cells using conventional solar cell processing. In order to understand the origin of the high cell performance, ensure the process reproducibility and further improve the technique, this paper analyzes the grain structures of the S2 mc-Si wafers by light microscopy and scanning electron microscopy supported with electron back scatter diffraction. Our analysis indicates that the increased performance of the S2 mc-Si solar cells is contributed to low dislocation density, uniform and highly oriented grains with high percentage of electrically inactive grain boundary (Σ3 grain boundary).
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Silicon Nanostructures and Photoluminescence

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. Silicon for photovoltaic applications10.1016/j.mseb.2006.06.054 ↗
2. Solar photovoltaic electricity10.1016/j.solener.2010.12.002 ↗
3. Multicrystalline silicon for solar cells10.1016/j.tsf.2005.01.061 ↗
4. Optimization of power consumption on silicon directional solidification system by using numerical simulations10.1016/j.jcrysgro.2012.06.010 ↗
5. Silicon feedstock for the multi-crystalline photovoltaic industry10.1016/S0927-0248(01)00147-7 ↗
6. Growth and characterization of multicrystalline silicon ingots by directional solidification for solar cell applications10.1016/j.egypro.2011.06.152 ↗
7. Multicrystalline silicon solar cells exceeding 20% efficiency10.1002/pip.583 ↗
8. Growth of structure-controlled polycrystalline silicon ingots for solar cells by casting10.1016/j.actamat.2006.03.014 ↗
9. Grain control in directional solidification of photovoltaic silicon10.1016/j.jcrysgro.2012.01.007 ↗
10. High-quality multi-crystalline silicon growth for solar cells by grain-controlled directional solidification10.1002/pip.964 ↗
11. An enhanced cooling design in directional solidification for high quality multi-crystalline solar silicon10.1016/j.jcrysgro.2011.12.045 ↗
12. Arrangement of dendrite crystals grown along the bottom of Si ingots using the dendritic casting method by controlling thermal conductivity under crucibles10.1016/j.jcrysgro.2011.01.069 ↗
13. Grain control using spot cooling in multi-crystalline silicon crystal growth10.1016/j.jcrysgro.2008.10.064 ↗
14. Recombination activity of contaminated dislocations in silicon10.1103/PhysRevB.63.115208 ↗
15. Modeling the effect of dislocations on the minority carrier diffusion length of a semiconductor10.1063/1.368378 ↗
16. Efficiency limitations of multicrystalline silicon solar cells due to defect clusters10.1557/PROC-864-E6.2 ↗
17. Metal precipitation at grain boundaries in silicon10.1063/1.2234570 ↗
18. Recombination activity of ∑3 boundaries in boron-doped multicrystalline silicon10.1063/1.1836009 ↗
19. Atomic structure of faceted ∑3 CSL grain boundary in silicon10.2320/matertrans.MD200706 ↗
20. K. Fujiwara, Crystal growth behaviors of silicon during melt growth processes. International Journal of Photoenergy, Volume 2012, article ID 169829, 16 pages 10.1155/2012/16982910.1155/2012/169829 ↗
21. Effects of grain boundaries on the performance of polycrystalline silicon solar cells