journal article·2011-01

Large-size multi-crystalline silicon solar cells with honeycomb textured surface and point-contacted rear toward industrial production

Daisuke Niinobe, Hiroaki Morikawa, Shuichi Hiza, Takehiko Sato, Shigeru Matsuno, Hirofumi Fujioka, Tomotaka Katsura, Tatsuki Okamoto, Satoshi Hamamoto, Takashi Ishihara, Satoshi Arimoto

Publisher page

Abstract

Abstract In this paper, we present a multi-crystalline solar cell with hexagonally aligned hemispherical concaves, which is known as honeycomb textured structure, for an anti-reflecting structure. The emitter and the rear surface were passivated by silicon nitride, which is known as passivated emitter and rear (PERC) structure. The texture was fabricated by laser-patterning of silicon nitride film on a wafer and wet chemical etching of the wafer beneath the silicon nitride film through the patterned holes. This process succeeded in substituting the lithographic process usually used for fabricating honeycomb textured structure in small area. After the texturing process, solar cells were fabricated by utilizing conventional fabrication techniques, i.e. phosphorus diffusion in tube furnace, deposition of anti-reflection film and rear passivation film by chemical vapor deposition, front and rear electrodes formation by screen printing, and contact formation by furnace. By adding relatively small complicating process to conventional production process, conversion efficiency of 19.1% was achieved with mc-Si solar cells of over 200 cm 2 in size. The efficiency was independently confirmed by National Institute of Advanced Industrial Science and Technology (AIST).
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Silicon Nanostructures and Photoluminescence

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (8)

Show source-provided references
1. J. Zhao, A. Wang, and M.A. Green, 19.8% efficient multicrystalline silicon solar cells with “honeycomb” textured front surface, in: Proceedings of the 2nd World Conference on Photovoltaic Energy Conversion, Ispra, Italy, 1998, pp. 1681–1684
2. Zhao · 19.8% efficient “honeycomb” textured multicrystalline and 24.4% monocrystalline silicon solar cells, Appl. Phys. Lett. · 1998 · 73 · 1991
3. Blakers · 22.8% efficient silicon solar cell, Appl. Phys. Lett. · 1988 · 55 · 1363
4. P. Choulat, G. Agostinelli, Y. Ma, F. Duerinckx, G. Beaucarne, Above, 17% industrial type PERC solar cell on thin multi-crystalline silicon substrate, Proceedings of the 22nd European PVSEC, Milano, Italy, 2007, pp.1011–1015
5. Schultz · Multicrystalline silicon solar cells exceeding 20% efficiency, Prog. Photovolt. · 2004 · 12 · 553
6. Warabisako · Optimization of thermal processing and device design for high-efficiency c-Si solar cells, Sol. Energy Mater. Sol. Cells · 1997 · 48 · 137
7. Dekkers · Requirements of PECVD SiNx:H layers for bulk passivation of mc-Si, Sol. Energy Mater. Sol. Cells · 2006 · 90 · 3244
8. Aberle · Surface passivation of crystalline silicon solar cells, Prog. Photovolt. · 2000 · 8 · 473