Preparation and characterization of a solar-driven sodium acetate trihydrate composite phase change material with Ti4O7 particles
Source abstract
Abstract
Thermal energy storage using phase change materials has received much attention as it can effectively relieve the contradiction of renewable energy between supply and demand. The novel bifunctional sodium acetate trihydrate (SAT) composite phase change materials with photo-thermal conversion and heat storage properties were developed to promote the thermal utilization of solar energy. The Ti 4O 7 particles were selected as photo-thermal conversion media with full spectral absorption of sunlight and efficient photo-thermal conversion performance. 5 wt% disodium hydrogen phosphate dodecahydrate (DSP) and 3 wt% carboxymethyl cellulose were used to decrease supercooling and restrain phase separation of SAT, respectively. The as-prepared SAT composites with different content of Ti 4O 7 possess a low supercooling degree of 0.9–1.5 °C and high latent heat of 228.6–257.7 kJ kg -1. Ti 4O 7 has a stable absorption capacity covering the full solar spectrum (200–2500 nm) and the absorption capacity of SAT and DSP in the infrared light even more than Ti 4O 7 at 1900 nm–2500 nm. The SAT composite sample with 10 wt% Ti 4O 7 has the best total solar absorption capacity of 93.33% more than Ti 4O 7 of 92.76% because SAT and DSP have outstanding absorption capacity in the long-wave infrared wavelength. The photo-thermal storage efficiency of all SAT composite photo-thermal conversion phase change materials exceeds 50%, of which the composite with 10 wt% Ti 4O 7 has the optimal photo-thermal conversion storage efficiency of 76.63%. The composite photo-thermal storage phase change materials have potential applications in solar energy systems.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Phase Change Materials Research · Solar Thermal and Photovoltaic Systems · Solar-Powered Water Purification Methods
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (53)
Show source-provided references
1. The magnesium nitrate hexahydrate with Ti4O7 composite phase change material for photo-thermal conversion and storage10.1016/j.solener.2021.10.063 ↗
2. Comparatively investigating the leading and trailing spark plug on the hydrogen rotary engine10.1016/j.fuel.2021.122005 ↗
3. Selection principles and thermophysical properties of high temperature phase change materials for thermal energy storage: a review10.1016/j.rser.2017.05.271 ↗
4. Energy storage: applications and challenges10.1016/j.solmat.2013.08.015 ↗
5. Phase change materials of paraffin in h-BN porous scaffolds with enhanced thermal conductivity and form stability10.1016/j.enbuild.2017.11.033 ↗
6. Thermal properties enhancement and application of a novel sodium acetate trihydrate-formamide/expanded graphite shape-stabilized composite phase change material for electric radiant floor heating10.1016/j.applthermaleng.2019.01.069 ↗
7. A review on energy conservation in building applications with thermal storage by latent heat using phase change materials10.1016/S0196-8904(03)00131-6 ↗
8. Synthesis of novel form-stable composite phase change materials with modified graphene aerogel for solar energy conversion and storage10.1016/j.solmat.2018.11.025 ↗
9. A foamed cement blocks with paraffin/expanded graphite composite phase change solar thermal absorption material10.1016/j.solmat.2019.110038 ↗
10. Solar energy storage using phase change materials10.1016/j.rser.2006.05.005 ↗
11. Application of material assessment methodology in latent heat thermal energy storage for waste heat recovery10.1016/j.apenergy.2016.11.070 ↗
12. Thermal energy storage (TES) for industrial waste heat (IWH) recovery: a review10.1016/j.apenergy.2016.06.147 ↗
13. A new method of application of hydrated salts on textiles to achieve thermoregulating properties, Thermochim
14. Salt hydrates as latent heat storage materials:Thermophysical properties and costs10.1016/j.solmat.2015.10.029 ↗
15. Recent developments in phase change materials for energy storage applications: a review10.1016/j.ijheatmasstransfer.2018.09.126 ↗
16. Influence of nanomaterials on properties of latent heat solar thermal energy storage materials-A review10.1016/j.enconman.2014.03.058 ↗
17. Review on thermal energy storage with phase change: materials, heat transfer analysis and applications10.1016/S1359-4311(02)00192-8 ↗
18. Thermal properties and thermal conductivity enhancement of composite phase change material using sodium acetate trihydrate-urea/expanded graphite for radiant floor heating system
19. Design and functionality of a segmented heat-storage prototype utilizing stable supercooling of sodium acetate trihydrate in a solar heating system10.1016/j.apenergy.2018.03.124 ↗
20. Prevention of supercooling and stabilization of inorganic salt hydrates as latent heat storage materials10.1016/0927-0248(92)90117-8 ↗
21. The “melting-point” of hydrated sodium acetate: solubility curves10.1021/j150099a002 ↗
22. Preparation and thermal properties of SAT-CMC-DSP/EG composite as phase change material10.1016/j.applthermaleng.2017.03.097 ↗
23. Preparation research of novel composite phase change materials based on sodium acetate trihydrate10.1016/j.applthermaleng.2017.02.102 ↗
24. The shape-stabilized light-to-thermal conversion phase change material based on CH3COONa·3H2O as thermal energy storage media10.1016/j.applthermaleng.2018.03.053 ↗
25. Thermal performance of sodium acetate trihydrate thickened with different materials as phase change energy storage material10.1016/S1359-4311(03)00107-8 ↗
26. Phase change performance of sodium acetate trihydrate with AlN nanoparticles and CMC10.1016/j.solmat.2011.05.025 ↗
27. Investigation of magnesium nitrate hexahydrate based phase change materials containing nanoparticles for thermal energy storage10.1088/2053-1591/ab386f ↗
28. Experimental studies on the supercooling and melting/freezing characteristics of nano-copper/sodium acetate trihydrate composite phase change materials10.1016/j.renene.2016.08.001 ↗
29. Preparation and performance analysis of modified sodium acetate trihydrate10.3390/ma11061016 ↗
30. Experimental investigation on mechanism of latent heat reduction of sodium acetate trihydrate phase change materials10.3390/ma13030584 ↗
31. Nanoencapsulation of phase change materials for advanced thermal energy storage systems10.1039/C8CS00099A ↗
32. Numerical investigation on the mixture formation and combustion processes of a gasoline rotary engine with direct injected hydrogen enrichment10.1016/j.apenergy.2018.04.092 ↗
33. A comparative study of mixture formation and combustion processes in a gasoline Wankel rotary engine with hydrogen port and direct injection enrichment10.1016/j.enconman.2018.04.105 ↗
34. Preparation and characterization of GO/PEG photo-thermal conversion form-stable composite phase change materials10.1016/j.renene.2019.03.141 ↗
35. Enhancing solar cell efficiency: the search for luminescent materials as spectral converters10.1039/C2CS35288E ↗
36. Facile synthesis of PEG based shape-stabilized phase change materials and their photo-thermal energy conversion10.1016/j.applthermaleng.2015.08.063 ↗
37. Novel organic solar thermal energy storage materials: efficient visible light-driven reversible solid–liquid phase transition10.1039/c2jm33289b ↗
38. Electro/photo to heat conversion system based on polyurethane embedded graphite foam10.1016/j.apenergy.2015.01.022 ↗
39. Improving the heat storage/release rate and photo-thermal conversion performance of an organic PCM/expanded graphite composite block10.1016/j.solmat.2019.110081 ↗
40. An experimental study in full spectra of solar-driven magnesium nitrate hexahydrate/graphene composite phase change materials for solar thermal storage applications10.1016/j.est.2021.102536 ↗
41. A full-band sunlight-driven carbon nanotube/PEG/SiO2 composites for solar energy storage10.1016/j.solmat.2013.12.022 ↗
42. A novel CNT encapsulated phase change material with enhanced thermal conductivity and photo-thermal conversion performance10.1016/j.solmat.2018.04.034 ↗
43. High-performance photothermal conversion of narrow-bandgap Ti2O3 nanoparticles10.1002/adma.201603730 ↗
44. Solar-driven phase change microencapsulation with efficient Ti4O7 nanoconverter for latent heat storage10.1016/j.nanoen.2018.09.018 ↗
45. Aerodynamic levitated laser annealing method to defective titanium dioxide with enhanced photocatalytic performance10.1007/s12274-016-1253-0 ↗
46. He · 2018
47. Thermal performance of sodium acetate trihydrate based composite phase change material for thermal energy storage10.1016/j.applthermaleng.2018.07.094 ↗
48. Characterization and thermal properties of a shape-stable Na2CO3-K2CO3/coal fly ash/expanded graphite composite phase change materials for high-temperature thermal energy storage10.1016/j.est.2020.102123 ↗
49. A direct absorption solar collector based on a water-ethylene glycol based nanofluid with anti-freeze property and excellent dispersion stability10.1016/j.renene.2018.10.073 ↗
50. High temperature and long term stability of carbon nanotube nanofluids for direct absorption solar thermal collectors10.1016/j.solener.2014.03.013 ↗
51. Thermodynamic properties and thermal stability of ionic liquid-based nanofluids containing graphene as advanced heat transfer fluids for medium-to-high-temperature applications10.1016/j.renene.2013.10.002 ↗
52. Supercooling and solidification behavior of phase change materials10.2355/isijinternational.50.1265 ↗
53. Ag-graphene/PEG composite phase change materials for enhancing solar-thermal energy conversion and storage capacity10.1016/j.apenergy.2018.12.075 ↗