Optimization of random silica-polymethylpentene (TPX) radiative coolers towards substantial cooling capacity
Source abstract
Abstract
Abstract In the context of global warming, radiative coolers with high solar reflectance and strong emissivity in the atmospheric window can cool the substrate as well as the ambient air. Silica at its nano or micro-scale being randomly dispersed into a uniform transparent polymer can form scalable radiative coolers for large-scale application. Promising cooling performance has been reported for silica-polymers compared with conventional cooling materials, but their performance can be largely influenced by various fabrication parameters. So far, how fabrication parameters influence the emissivity and the cooling performance has not been experimentally demonstrated and the cooling capacity of silica-polymers reported was not substantial compared to other superior radiative coolers. In this work, random silica-polymer has been optimized experimentally. Lab measurement and experimental testing of six fabricated silica-polymers under subtropical and desert climates indicated that due to the complexity of the thermo-radiative balance, high emissivity and strong selectivity are both indispensable in the production of high cooling power. If combined with superior reflectors with higher solar reflectance and especially the emissivity in 8–13 μm enhancing the heat dissipation ability, substantial cooling capacity can be achieved: under the harsh desert climate with average peak solar radiation over 1100 Wm-2, the combination presented sub-ambient temperature of maximum 4.7 °C when air temperature reached its peak and the maximum daytime and night-time sub-ambient temperatures were 12.5 °C and 15.9 °C respectively.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Thermal Radiation and Cooling Technologies · Urban Heat Island Mitigation · Building Energy and Comfort Optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. 2021
2. 2020
3. Analyzing the heat island magnitude and characteristics in one hundred Asian and Australian cities and regions10.1016/j.scitotenv.2015.01.060 ↗
4. On the energy impact of urban heat island and global warming on buildings10.1016/j.enbuild.2014.07.022 ↗
5. Regulating the damaged thermostat of the cities—status, impacts and mitigation challenges10.1016/j.enbuild.2015.01.027 ↗
6. On the cooling potential of irrigation to mitigate urban heat island10.1016/j.scitotenv.2020.139754 ↗
7. The use of water irrigation to mitigate ambient overheating in the built environment: recent progress, Build
8. Water mist spray for outdoor cooling: a systematic review of technologies, methods and impacts
9. Recent development and research priorities on cool and super cool materials to mitigate urban heat island10.1016/j.renene.2020.07.109 ↗
10. On the energy potential of daytime radiative cooling for urban heat island mitigation10.1016/j.solener.2020.08.015 ↗
11. Experimental study of a ground sink direct cooling system in cold areas10.1016/j.enbuild.2009.07.020 ↗
12. Thermal analysis in daytime radiative cooling10.1088/1757-899X/609/7/072064 ↗
13. Passive radiative cooling below ambient air temperature under direct sunlight10.1038/nature13883 ↗
14. Ultrabroadband photonic structures to achieve high-performance daytime radiative cooling10.1021/nl4004283 ↗
15. Scalable-manufactured randomized glass-polymer hybrid metamaterial for daytime radiative cooling10.1126/science.aai7899 ↗
16. A radiative cooling structural material10.1126/science.aau9101 ↗
17. Hierarchically porous polymer coatings for highly efficient passive daytime radiative cooling10.1126/science.aat9513 ↗
18. Selection of polymers with functional groups for daytime radiative cooling10.1016/j.mtphys.2019.100127 ↗
19. Daytime radiative cooling using near-black infrared emitters10.1021/acsphotonics.6b00991 ↗
20. Colored emitters with silica-embedded perovskite nanocrystals for efficient daytime radiative cooling10.1016/j.nanoen.2020.105461 ↗
21. Daytime radiative cooling with silica fiber network10.1016/j.solmat.2019.110320 ↗
22. Low-cost radiative cooling blade coating with ultrahigh visible light transmittance and emission within an “atmospheric window”10.1016/j.solmat.2020.110563 ↗
23. Scalable flexible hybrid membranes with photonic structures for daytime radiative cooling10.1002/adfm.201907562 ↗
24. Effective radiative cooling by paint-format microsphere-based photonic random media10.1021/acsphotonics.7b01492 ↗
25. Effect of embedded polydisperse glass microspheres on radiative cooling of a coating10.1016/j.ijthermalsci.2019.03.014 ↗
26. Nanoporous silica microspheres–ploymethylpentene (TPX) hybrid films toward effective daytime radiative cooling10.1016/j.solmat.2019.110301 ↗
27. Design and analysis of broadband reflector for passive radiative cooling
28. The radiative cooling efficiency of silica sphere embedded polymethylpentene (TPX) systems10.1016/j.solmat.2020.110671 ↗
29. Plasmon-enhanced infrared emission approaching the theoretical limit of radiative cooling ability10.1021/acs.nanolett.0c01457 ↗
30. Dynamic impact of climate on the performance of daytime radiative cooling materials10.1016/j.solmat.2020.110426 ↗
31. Scalable dual-layer film with broadband infrared emission for sub-ambient daytime radiative cooling10.1016/j.solmat.2020.110393 ↗
32. The radiative cooling of selective surfaces10.1016/0038-092X(75)90062-6 ↗
33. Réfrigération radiative. Effet de serre inverse
34. Optical constants of silica glass from extreme ultraviolet to far infrared at near room temperature10.1364/AO.46.008118 ↗