The path towards efficient wide band gap thin-film kesterite solar cells with transparent back contact for viable tandem application
Source abstract
Abstract
Abstract Wide band gap thin-film kesterite solar cell based on non-toxic and earth-abundant materials might be a suitable candidate as a top cell for tandem configuration in combination with crystalline silicon as a bottom solar cell. For this purpose and based on parameters we have extracted from electrical and optical characterization techniques of Cu2ZnGeSe4 absorbers and solar cells, a model has been developed to describe the kesterite top cell efficiency limitations and to investigate the different possible configurations with transparent back contact for four-terminal tandem solar cell application. Furthermore, we have studied the tandem solar cell performance in view of the band gap and the transparency of the kesterite top cell and back contact engineering. Our detailed analysis shows that a kesterite top cell with efficiency > 14%, a band gap in the range of 1.5–1.7 eV and transparency above 80% at the sub-band gaps photons energies are required to achieve a tandem cell with higher efficiency than with a single silicon solar cell.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (64)
Show source-provided references
1. Device characteristics of CZTSe thin-film solar cells with 12.6% efficiency10.1002/aenm.201301465 ↗
2. Improved performance of Ge-alloyed CZTGeSSe thin-film solar cells through control of elemental losses10.1002/pip.2442 ↗
3. Improvement of voltage deficit of Ge-incorporated kesterite solar cell with 12.3% conversion efficiency10.7567/APEX.9.102301 ↗
4. Optoelectronic properties of thin film Cu2ZnGeSe4 solar cells10.1016/j.solmat.2017.06.050 ↗
5. 7.6% CZGSe solar cells thanks to optimized CdS chemical bath deposition10.1002/pssa.201800043 ↗
6. Sn substitution by Ge: strategies to overcome the open-circuit voltage deficit of kesterite solar cells10.1021/acsaem.0c00763 ↗
7. Wide band-gap tuning Cu2ZnSn1-xGexS4 single crystals: optical and vibrational properties10.1016/j.solmat.2015.12.021 ↗
8. Phase identification and control of thin films deposited by co-evaporation of elemental Cu, Zn, Sn, and Se10.1116/1.4732529 ↗
9. Precursors' order effect on the properties of sulfurized Cu2ZnSnS4 thin films10.1088/0268-1242/24/10/105013 ↗
10. Influence of precursor sulfur content on film formation and compositional changes in Cu2ZnSnS4 films and solar cells10.1016/j.solmat.2011.10.019 ↗
11. Growth mechanisms of co-evaporated kesterite: a comparison of Cu-rich and Zn-rich composition paths10.1002/pip.2296 ↗
12. Investigation of defects by admittance spectroscopy measurements in poly (3-hexylthiophene):(6,6)-phenyl C61-butyric acid methyl ester organic solar cells degraded under air exposure10.1063/1.3658023 ↗
13. Evaluation of the Tauc method for optical absorption edge determination: ZnO thin films as a model system10.1002/pssb.201552007 ↗
14. Energy gap-refractive index relations in semiconductor-An overview10.1016/j.infrared.2006.04.001 ↗
15. Pankove · 1975
16. Cu2ZnSnSe4-based solar cells with efficiency exceeding 10% by adding superficial Ge Nanolayer: the interaction between Ge and Na10.1109/JPHOTOV.2016.2535236 ↗
17. Effects of Sodium on Cu(In,Ga)Se2-based thin films and solar cells10.1143/JJAP.36.732 ↗
18. Sodium assisted sintering of Chalcogenides and its application to solution processed Cu2ZnSn(S,S2) thin film solar cells10.1021/cm403504u ↗
19. Sulfurization of co-evaporated Cu2ZnSnSe4 thin film solar cells: the role of Na10.1016/j.solmat.2018.06.015 ↗
20. Effects of sodium incorporation in Co-evaporated Cu2ZnSnSe4 thin-film solar cells, Appl
21. Decock · 2011 · 2922
22. Classification of lattice defects in the Kesterite Cu2ZnSnS4 and Cu2ZnSnSe4 earth-abundant solar cell absorbers10.1002/adma.201203146 ↗
23. Interpretation of admittance, capacitance-voltage and current-voltage signatures in Cu(In,Ga)Se2 thin film solar cells10.1063/1.3277043 ↗
24. Signature of a back contact barrier in DLTS spectra10.1063/1.3564938 ↗
25. First-principles study of defect formation in a photovoltaics semiconductor Cu2ZnGeSe410.7567/JJAP.57.02CE06 ↗
26. Far infrared studies on stannite and wurtzstannite type compounds10.1016/0584-8539(91)80283-O ↗
27. Characterization of vibrational and mechanical properties of quaternary compounds Cu2ZnSnS4 and Cu2ZnSnSe4 in kesterite and stannite structures10.1103/PhysRevB.84.205201 ↗
28. Polarized Raman scattering analysis of Cu2ZnSnSe4 and Cu2ZnGeSe4 single crystals10.1063/1.4830028 ↗
29. Infrared lattice vibrations in Cu2GeSe310.1002/crat.2170220815 ↗
30. Advanced electrical simulation of thin film solar cells10.1016/j.tsf.2012.10.032 ↗
31. Formation and characterisation of MoSe2 for Cu(In,Ga)Se2 based solar cells10.1016/j.tsf.2004.11.098 ↗
32. Control of an interfacial MoSe2 layer in Cu2ZnSnSe4 thin film solar cells: 8.9 % power conversion efficiency with a TiN diffusion barrier10.1063/1.4740276 ↗
33. Impact of Na on MoSe2 formation at the CIGSe/Mo interface in thin-film solar cells on polyimide foil at low process temperatures10.1016/j.actamat.2013.09.051 ↗
34. Crystallographic and optical properties of narrow band gap Cu2GeSe3 and Cu2(Sn1-xGex)Se3 solid solution
35. Madelung · 2004
36. On the electrical and thermal properties of ternary chalcogenide A2IBIVX2, aAIBVX2nd (;A3IBVX4 ;AI=Cu )BIV=Ge, Sn, BV=Sb;X=S,Se, Te10.1143/JJAP.10.218 ↗
37. Characterization of reactively sputtered molybdenum oxide films for solar cell application10.1063/1.4812587 ↗
38. The effect of Na in polycrystalline and epitaxial single-crystal CuIn1-xGaxSe210.1016/j.tsf.2004.11.038 ↗
39. Comparative study of Cu2ZnSnSe4 solar cells growth on transparent conductive oxides and molybdenum substrates10.1016/j.solener.2019.10.050 ↗
40. Bifacial kesterite solar cells on FTO substrates10.1021/acssuschemeng.7b02797 ↗
41. Pulsed laser deposition of quaternary Cu2ZnSnSe4 thin films10.1002/pssa.200723144 ↗
42. Intragrain charge transport in kesterite thin films-limits arising from carrier localization10.1063/1.4965868 ↗
43. Employing time-resolved terahertz spectroscopy to analyze carrier dynamics in thin-film Cu2ZnSn(S,Se)4 absorber layers10.1063/1.4884817 ↗
44. Thermally evaporated Cu2ZnSnS4 solar cells10.1063/1.3499284 ↗
45. The path towards a high-performance solution-processed kesterite solar cell10.1016/j.solmat.2010.11.028 ↗
46. Direct evidence of current blocking by ZnSe in Cu2ZnSnSe4 solar cells10.1063/1.4706256 ↗
47. Low band gap liquid-processed CZTSe solar cell with 10.1% efficiency10.1039/c2ee00056c ↗
48. On the CdS/CuInSe2 conduction band discontinuity10.1063/1.115523 ↗
49. Effects of Au/CdTe back contact on IV and CV characteristics of Au/CdTe/CdS/TCO solar cells10.1063/1.363946 ↗
50. The back contact influence on characteristics of CdTe/CdS solar cells10.1016/S0040-6090(99)00760-9 ↗
51. Origin of crossover in current density-voltage characteristics of Cu(In,Ga)Se2 thin film solar cell fabricated using lift-off process10.1143/JJAP.50.040201 ↗
52. Fill factor losses in Cu2ZnSn(SxSe1-x)4 solar cells:Insights from physical and electrical characterization of devices and exfoliation films10.1002/aenm.201501609 ↗
53. Back contact engineering for increased performance in Kesterite solar cells10.1002/aenm.201602585 ↗
54. Nanoscale characterization of back surfaces and interfaces in thin Film kesterite solar cells10.1021/acsami.7b01838 ↗
55. Transparent conducting oxides for photovoltaics: manipulation of fermi level, work function and energy band alignment10.3390/ma3114892 ↗
56. Improved performance of ultrathin Cu(In,Ga)Se2 solar cells with a backwall superstrate configuration10.1109/JPHOTOV.2014.2345436 ↗
57. The importance of back contact modification in Cu2ZnSnSe4 solar cells: the role of a thin MoO2 layer10.1016/j.nanoen.2016.06.034 ↗
58. The effect of thermal evaporated MoO3 intermediate layer as primary back contact for kesterite Cu2ZnSnS4 solar cells10.1016/j.tsf.2018.01.012 ↗
59. 24.5% efficiency silicon PERT cells on MCZ substrates and 24.7% efficiency PERL cells on FZ substrates10.1002/(SICI)1099-159X(199911/12)7:6<471::AID-PIP298>3.0.CO;2-7 ↗
60. 24% Efficient perl silicon solar cell : recent improvements in high efficiency silicon cell research10.1016/0927-0248(95)00117-4 ↗
61. Impurity photovoltaic effect in GaAs solar cell with two deep impurity levels10.1016/j.solmat.2008.07.003 ↗
62. Numerical simulation of impurity photovoltaic effect in silicon solar cells10.1016/j.renene.2007.05.027 ↗
63. The path to 25% silicon solar cells efficiency: history of the silicon cell evolution10.1002/pip.892 ↗
64. Cu2Zn(Sn,Ge)Se4 and Cu2Zn(Sn,Si)Se4 alloys as photovoltaic materials: structural and electronic properties10.1103/PhysRevB.87.115208 ↗