journal article·2020-05

Flexible four-junction inverted metamorphic AlGaInP/AlGaAs/ In0.17Ga0.83As/In0.47Ga0.53As solar cell

Xinping Huang, Junhua Long, Dongying Wu, Sai Ye, Xuefei Li, Qiangjian Sun, Zhiwei Xing, Wenxian Yang, Minghui Song, Yun Guo, Shulong Lu

Publisher page

Abstract

Abstract A flexible four-junction (4 J) AlGaInP/AlGaAs/In0.17Ga0.83As/In0.47Ga0.53As solar cell with the band gap energy of 1.92/1.53/1.18/0.82eV was fabricated. Taking advantages of aluminum (Al)-contained material as well as metamorphic growth, the design of multiple junction solar cells became much easier and more flexible. In order to accommodate lattice mismatch between two InGaAs sub cells, compositionally step-graded AlGaInAs buffer layers were applied to release the mismatch strain during the inverted metamorphic (IMM) 4 J solar cells growth. A flexible 4 J solar cell on a 50 μm thick polyimide (PI) film was successfully fabricated by using temporary bonding and epitaxial layer lift-off via selective wet chemical etching. A conversion efficiency of 25.76% (AM1.5G) with an open circuit voltage of 3.46V, a short-circuit current density of 9.07 mA/cm2 and a fill factor of 82.14% was obtained without anti-reflection coating (ARC), and it would be higher than 32% by ARC integration. The mass density of the 4 J flexible solar cell was only 467 g/m2, and the specific power was up to 550 W/kg.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: solar cell performance optimization · Nanowire Synthesis and Applications · Semiconductor Quantum Structures and Devices

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. III-V compound multi-junction solar cells: present and future10.1016/S0927-0248(02)00168-X ↗
2. Current-matched triple-junction solar cell reaching 41.1% conversion efficiency under concentrated sunlight10.1063/1.3148341 ↗
3. World's highest efficiency triple-junction solar cells fabricated by inverted layers transfer process
4. Development of a four sub-cell inverted metamorphic multi-junction (IMM) highly efficient AM0 solar cell
5. III-V alloys for optoelectronic applications10.1007/BF02660488 ↗
6. Application of InGaP/GaAs/InGaAs triple junction solar cells to space use and concentrator photovoltaic
7. GaInP/GaInAs/GaInNAs/Ge four-junction solar cell grown by metal organic chemical vapor deposition with high efficiency
8. Direct semiconductor bonding technology (SBT) for high efficiency III-V multi-junction solar cells
9. Room-temperature wafer bonded InGaP/GaAs//InGaAsP/InGaAs four-junction solar cell grown by all-solid state molecular beam epitaxy
10. Wafer bonded 4-Junction GaInP/GaAs//GaInAsP/GaInAs concentrator solar cells10.1063/1.4897025 ↗
11. P. B. T.N.D. Tibbits, M. Grave, C. Karcher, E. Oliva, G. Siefer, A. Wekkeli, M. Schachtner, F. Dimroth, A.W. Bett, R. Krause, M. Piccin, N. Blanc, M. Muñoz-Rico, C. Arena, E. Guiot, C. Charles-Alfred, C. Drazek, F. Janin, L. Farrugia, B. Hoarau, J. Wasselin, A. Tauzin, T. Signamarcheix, T. Hannappel, K. Schwarzburg, A. Dobrich, New efficiency frontiers with wafer-bonded multi junction solar cell, in: 29th European PV Sol. Energy Conf., pp.1975-1978, https://doi.org/10.4229/EUPVSEC20142014-4CP.2.1.
12. Wafer bonded four-junction GaInP/GaAs//GaInAsP/GaInAs concentrator solar cells with 44.7% efficiency10.1002/pip.2475 ↗
13. Design flexibility of ultrahigh efficiency four-junction inverted metamorphic solar cells10.1109/JPHOTOV.2015.2505182 ↗
14. Lattice-mismatched 0.7-eV GaInAs solar cells grown on GaAs using GaInP compositionally graded buffers10.1109/JPHOTOV.2013.2281724 ↗
15. 0.7-eV GaInAs junction for a GaInP/GaAs/GaInAs(1eV)/GaInAs(0.7eV) four-junction solar cell
16. Lattice-mismatched approaches for high-performance, III-V photovoltaic energy converters
17. Compositionally undulating step-graded InAsyP1-y buffer layer growth by metal-organic chemical vapor deposition10.1016/j.jcrysgro.2012.09.035 ↗
18. High-efficiency flexible III-V photovoltaic solar cells based on single-crystal-like thin films directly grown on metallic tapes10.1002/pip.3070 ↗
19. Ultralight high-efficiency flexible InGaP/(In)GaAs tandem solar cells on plastic10.1002/aenm.201200827 ↗
20. Preparation of large area and high performance flexible GaInP/GaAs/InGaAs tandem solar cells
21. Development of InGaP/GaAs/InGaAs inverted triple junction concentrator solar cells10.1063/1.4822190 ↗
22. Epitaxial lift-off of large-area GaAs multi-junction solar cells for high efficiency clean and portable energy power generation
23. High efficiency inverted metamorphic (IMM) solar cells
24. Modeling the equivalent oxide thickness of Surrounding Gate SOI devices with high-kappa insulators10.1016/j.sse.2008.06.059 ↗
25. Growth and characterization of high In-content InGaN grown by MBE using metal modulated epitaxy technique (MME)10.1016/j.jcrysgro.2019.03.021 ↗
26. X-ray reciprocal space mapping studies of strain relaxation in thin SiGe layers (<= 100 nm) using a low temperature growth step10.1016/S0022-0248(01)00821-1 ↗
27. Effect of crystalline quality on photovoltaic performance for In0.17Ga0.83As solar cell using X-Ray reciprocal space mapping10.1109/JQE.2011.2166535 ↗
28. Tilt generation and phase separation in metamorphic GaInP buffers grown on GaAs substrates by metal-organic chemical vapor deposition10.1016/j.jcrysgro.2012.11.025 ↗
29. Effects of substrate miscut on the quality of In0.3Ga0.7As layers grown on metamorphic (Al)GaInP buffers by metal-organic chemical vapor deposition
30. Generalized optoelectronic model of series-connected multijunction solar cells10.1109/JPHOTOV.2015.2478072 ↗
31. Lightweight, low cost InGaP/GaAs dual-junction solar cells on 100 mm epitaxial lift off (ELO) wafers
32. High efficiency thin film GaInP/GaAs/InGaAs inverted metamorphic (IMM) solar cells based on electroplating process10.1016/j.jcrysgro.2019.02.057 ↗