Combined experimental and numerical determination of the asymmetry factor of scattering phase functions in porous volumetric solar receivers
Source abstract
Abstract
Abstract Modelling of solar radiation propagation and absorption in porous media is a crucial part in the modelling of porous volumetric receivers in concentrated solar power (CSP) plants. The radiative properties of the porous media should be known in detail for accurate receiver modelling. In this work, an experimental study and a numerical model are combined aiming to estimate the asymmetry factor of Henyey-Greenstein (HG) scattering phase function in the visible spectral range for porous volumetric receivers made of open-cell silicon carbide (SiC) ceramic foam. For the experimental, the hemispherical diffuse reflectance of five different samples is measured using a collimated light source and an integrating sphere. For the numerical modelling, an algorithm based on a three-dimensional Monte Carlo Ray Tracing (MCRT) method was developed to simulate radiation propagation and absorption in porous media for the same conditions of the experimental apparatus. The asymmetry factor is determined by adjusting its value in the numerical model in order to minimize the difference between measured and simulated values. Results show that the solar radiation scattering in open-cell SiC ceramic foams is slightly backwards, being the optimum asymmetry factor of the Henyey-Greenstein phase function approximately − 0.25 , with a mean bias error of 0.0045 % and a root mean square difference of 0.2926 % between modelled and measured values of diffuse reflectance. Experimental results were also compared with the phase function for packing of spheres and with the isotropic scattering phase function. The first overpredicts the diffuse reflectance, while the second function underpredicts it.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Solar Thermal and Photovoltaic Systems · Radiative Heat Transfer Studies · Solar Radiation and Photovoltaics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Solar power towers using supercritical CO2 and supercritical steam cycles, and decoupled combined cycles
2. Review of high-temperature central receiver designs for concentrating solar power10.1016/j.rser.2013.08.099 ↗
3. High-temperature, point-focus , pressurised gas-phase solar receivers: a comprehensive review10.1016/j.enconman.2019.02.020 ↗
4. Volumetric receivers in solar thermal power plants with central receiver system technology: a review10.1016/j.solener.2011.02.002 ↗
5. Three-dimensional CFD modelling and thermal performance analysis of porous volumetric receivers coupled to solar concentration systems10.1016/j.apenergy.2019.113433 ↗
6. Processing and properties of macroporous silicon carbide ceramics: a review10.1016/j.jascer.2013.07.003 ↗
7. Thermal and hydrodynamic behavior of ceramic volumetric absorbers for central receiver solar power plants: a review10.1016/j.rser.2015.12.106 ↗
8. Pore-level numerical analysis of the infrared surface temperature of metallic foam10.1016/j.jqsrt.2017.06.004 ↗
9. Design, manufacture and testing of porous materials with ordered and random porosity: application to porous medium burners10.1016/j.applthermaleng.2019.113724 ↗
10. Design of three-layered struts in SiC reticulated porous ceramics for porous burner10.1016/j.ceramint.2019.01.175 ↗
11. Ceramics and ceramic matrix composites for heat exchangers in advanced thermal systems–A review10.1016/j.applthermaleng.2010.02.018 ↗
12. Conjugated heat transfer analysis of a foam filled double pipe heat exchanger for high-temperature application10.1016/j.ijheatmasstransfer.2019.01.100 ↗
13. Development of novel carbon bonded filter compositions for steel melt filtration10.1016/j.ceramint.2012.03.022 ↗
14. Simulation of fluid and inclusions Dynamics during filtration operations of ductile iron melts using foam filters10.1007/s11663-008-9190-2 ↗
15. Three-dimensional modelling and analysis of solar radiation absorption in porous volumetric receivers10.1016/j.apenergy.2018.02.065 ↗
16. Volumetric radiative properties of irregular open-cell foams made from semitransparent absorbing-scattering media10.1016/j.jqsrt.2018.11.037 ↗
17. Determination of critical thermal loads in ceramic high concentration solar receivers10.1016/j.solmat.2017.11.033 ↗
18. Pore-scale numerical simulation of fully coupled heat transfer process in porous volumetric solar receiver10.1016/j.energy.2017.08.062 ↗
19. Integrated simulation of continuous-scale and discrete-scale radiative transfer in metal foams10.1016/j.jqsrt.2018.04.001 ↗
20. Integrated simulation of continuous-scale and discrete scale radiative transfer in an open-cell foam made of semitransparent absorbing scattering ceramics10.1016/j.jqsrt.2018.12.039 ↗
21. Modelling strategies for porous structures as solar receivers in central receiver systems: a review10.1016/j.rser.2019.03.059 ↗
22. Absorption/scattering coefficients and scattering phase functions in reticulated porous ceramics10.1115/1.2824071 ↗
23. Identification of radiative properties of reticulated ceramic porous inert media using ray tracing technique10.1016/j.jqsrt.2012.05.017 ↗
24. Tomography-based radiative transfer analysis of an open-cell foam made of semitransparent alumina ceramics10.1016/j.solmat.2018.09.005 ↗
25. Radiative properties of irregular open cell solid foams10.1016/j.ijthermalsci.2017.03.007 ↗
26. Applicability of highly reflective aluminium coil for solar concentrators10.1016/S0038-092X(00)00027-X ↗
27. Identification of spectral radiative properties of polyurethane foam from hemispherical and bi-directional transmittance and reflectance measurements10.1016/S0022-4073(01)00199-6 ↗
28. Emissivity measurements and modeling of silicon-related materials: an overview10.1023/A:1012869710173 ↗
29. Total hemispherical emissivity of sintered SiC up to 1850 K in high vacuum and in air at different pressures10.1016/j.jeurceramsoc.2018.03.050 ↗
30. Influence of scattering phase function on estimated thermal properties of Al2O3 ceramic foams10.1007/s10765-018-2473-1 ↗
31. Experimental evaluation of scattering phase function and optimization of radiation absorption in solar photocatalytic reactors10.1016/j.applthermaleng.2017.08.046 ↗
32. Diffuse radiation in the galaxy10.1086/144246 ↗
33. Tomography-based Monte Carlo determination of radiative properties of reticulate porous ceramics10.1016/j.jqsrt.2006.11.002 ↗
34. Effect of foam properties on radiative properties of open cell silicon carbide foams10.1016/j.jqsrt.2012.03.009 ↗
35. Numerical simulation of convective heat transfer between air flow and ceramic foams to optimise volumetric solar air receiver performances10.1016/j.ijheatmasstransfer.2010.11.037 ↗
36. Thermal radiation properties of highly porous cellular foams10.1615/SpecialTopicsRevPorousMedia.v4.i2.20 ↗
37. Integrating sphere-based relative methods for reflection measurements10.1088/0026-1394/53/6/1231 ↗
38. SphereOptics
39. van de Hulst · 1980 · vol. II
40. Vafai · 2005
41. Modest · 2013
42. Thermal radiation in particulate media with dependent and independent scattering10.1615/AnnualRevHeatTransfer.v1.30 ↗
43. Monte Carlo determination of radiative properties of metal foams: comparison between idealized and real cell structures10.1016/j.ijthermalsci.2014.08.006 ↗
44. Howell · 2002
45. A compilation of data on the radiant emissivity of some materials at high temperatures10.1016/j.joei.2018.04.006 ↗