journal article·2020-01

In-situ formation of indium seed layer for copper metallization of silicon heterojunction solar cells

Junjun Li, Jian Yu, Tao Chen, Haichuan Zhang, Qiyun Wang, Pu Wang, Yuelong Huang

Publisher page

Abstract

Abstract Low production cost and simplified process are the prerequisites for large-scale commercialization of highly efficient silicon heterojunction (SHJ) solar cells. In this paper, an innovative method of plating process with in-situ seed layer technique is proposed for the metallization of SHJ solar cells. As indicated by the measurements of cyclic voltammetry curves and scanning electron microscopy, electrochemical reduction reaction occurs and results in metal particles randomly distributed on the surface of tungsten doped indium oxide (IWO) layer. Given the measurement of Energy-dispersive X-ray spectroscopy elemental mapping and X-ray photoelectron spectroscopy, the metal particles are indium and are electrochemically reduced from the IWO film. These indium particles can serve as the seed layer facilitating the subsequent copper plating process. In order to prevent copper diffusion and enhance the adhesion, nickel plating and alkaline copper plating was applied. As a result, the maximum peeling force of plated copper busbar reaches 4.23 N. This is higher than that of the screen-printed silver busbar (2.31 N). By adopting the in-situ indium-seed-layer based plating process, a cell efficiency of 22.01% was achieved with significantly improved short circuit current density and fill factor. Taking advantage of the in-situ seed layer technique, the all-solution based plating process is simplified and effective without full area seed layer deposition and subsequent etch back step, showing great potential for the copper metallization of SHJ solar cells with reduced cost.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Semiconductor materials and interfaces · Thin-Film Transistor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. High efficiency heterojunction solar cells on n-type kerfless mono crystalline silicon wafers by epitaxial growth10.1063/1.4922196 ↗
2. Achievement of more than 25% conversion efficiency with crystalline silicon heterojunction solar cell10.1109/JPHOTOV.2014.2352151 ↗
3. Recombination activity of interstitial iron and other transition metal point defects in p- and n-type crystalline silicon10.1063/1.1812833 ↗
4. 24.7% record efficiency HIT solar cell on thin silicon wafer10.1109/JPHOTOV.2013.2282737 ↗
5. Exceeding conversion efficiency of 26% by heterojunction interdigitated back contact solar cell with thin film Si technology10.1016/j.solmat.2017.06.024 ↗
6. Optimized metallization for interdigitated back contact silicon heterojunction solar cells10.1002/solr.201700021 ↗
7. High-performance TiO2-based electron-selective contacts for crystalline silicon solar cells10.1002/adma.201600926 ↗
8. Silicon heterojunction solar cells: recent technological development and practical aspects-from lab to industry10.1016/j.solmat.2018.07.018 ↗
9. Impact of carrier recombination on fill factor for large area heterojunction crystalline silicon solar cell with 25.1% efficiency10.1063/1.4937224 ↗
10. High-efficiency silicon heterojunction solar cells: a review10.1515/green-2011-0018 ↗
11. Tungsten doped indium oxide film: ready for bifacial copper metallization of silicon heterojunction solar cell10.1016/j.solmat.2015.09.033 ↗
12. Patterning and formation of copper electroplated contact for bifacial silicon hetero-junction solar cell10.1016/j.solener.2017.02.022 ↗
13. Papet · 2013 · 1976
14. Patterning for plated heterojunction cells10.1016/j.egypro.2015.03.290 ↗
15. Screen-printed masking of transparent conductive oxide layers for copper plating of silicon heterojunction cells10.1016/j.apsusc.2015.05.085 ↗
16. Silicon heterojunction solar cells with copper-plated grid electrodes: status and comparison with silver thick-film techniques10.1109/JPHOTOV.2014.2321663 ↗
17. Metallization of Si heterojunction solar cells by nanosecond laser ablation and Ni-Cu plating10.1016/j.solmat.2016.09.021 ↗
18. Novel plating processes for silicon heterojunction solar structured seed layer10.1109/JPHOTOV.2017.2748999 ↗
19. Effects of SiOx barrier layer prepared by plasma-enhanced chemical vapor deposition on improvement of long-term reliability and production cost for Cu-plated amorphous Si/crystalline Si heterojunction solar cells10.1016/j.solmat.2016.12.029 ↗
20. Contact resistivity and adhesion of copper alloy seed layer for copper-plated silicon heterojunction solar cells
21. Laser transfer and firing of NiV seed layer for the metallization of silicon heterojunction solar cells by Cu-plating10.1002/solr.201700085 ↗
22. Dual-function light-trapping: selective plating mask of SiOx/SiNx stacks for silicon heterojunction solar cells10.1002/solr.201800261 ↗
23. Recent progress in alkaline water electrolysis for hydrogen production and applications10.1016/j.pecs.2009.11.002 ↗
24. Review of the potential of the Ni/Cu plating technique for crystalline silicon solar cells10.3390/ma7021318 ↗
25. Large area copper plated silicon solar cell exceeding 19.5% efficiency10.1016/j.egypro.2012.05.008 ↗