journal article·2017-07

Interface oxides in femtosecond laser structured plated Ni-Cu-Ag contacts for silicon solar cells

Andreas Büchler, Sven Kluska, Fabian Meyer, Andreas A. Brand, Gisela Cimiotti, Jonas Bartsch, Markus Glatthaar

Publisher page

Abstract

Abstract Light-induced plating of a Ni-Cu-Ag stack allows for high efficient and potentially low cost solar cell metallization. The definition of the contact structure is performed by local laser ablation of the solar cells surface passivation layer. By using a femtosecond pulsed UV laser the crystal damage due to ablation is minimized in respect to any other approach of laser-structuring. Within the study presented plated contacts on femtosecond structured silicon are evaluated regarding electrical and mechanical properties. The results show that contact resistance is determined by a highly inhomogeneous interface oxide layer that is formed while femtosecond pulsed laser ablation on textured solar cell surfaces. Silicidation of the silicon/nickel contact interface is assumed to be essential for adhesion and low contact resistances. However, the results presented indicate that mechanical adhesion of contacts plated on femtosecond laser structured surfaces is ensured by the laser-induced microstructure and that low contact resistance and high fill-factors are reached when interface oxides are fully dissolved. Therefore, controlling the surface properties before metal-deposition is essential for plated contacts on femtosecond pulse laser structured silicon while silicide formation may be superfluous.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Integrated Circuits and Semiconductor Failure Analysis · Advanced Surface Polishing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. Evolution of metal plating for silicon solar cell metallisation10.1002/pip.2221 ↗
2. Development of a large area n-type PERT cell with high efficiency of 22% using industrially feasible technology10.1016/j.solmat.2016.03.032 ↗
3. Summary of the 5th Workshop on metallization for crystalline silicon solar cells10.1016/j.egypro.2015.03.282 ↗
4. J. Horzel, N. Bay, T. Knarozovski, M. Passig, M. Sieber, J. Burschik, H. Kühnlein, A. Letize, B. Lee, D. Weber, Low cost high efficiency metallization using Ni/Cu based contacts for next generation industrial solar cells, in: Proceedings of the 8th SNEC International Photovoltaic Power Generation Conference, 2014.
5. Review of the potential of the Ni/Cu plating technique for crystalline silicon solar cells10.3390/ma7021318 ↗
6. Electrical and mechanical properties of plated Ni/Cu contacts for Si solar cells10.1016/j.egypro.2015.07.104 ↗
7. Systematic TLM measurements of NiSi and PtSi specific contact resistance to n-and p-type Si in a broad doping range10.1109/LED.2008.917934 ↗
8. B. Steinhauser, M. Kamp, A.A. Brand, U. Jager, J. Bartsch, J. Benick, M. Hermle, High-efficiency n-type silicon solar cells: advances in passdop technology and NiCu plating on boron emitter, 2015.10.1109/JPHOTOV.2015.2508240 ↗
9. Evaluation of advanced p‐PERL and n‐PERT large area silicon solar cells with 20.5% energy conversion efficiencies10.1002/pip.2478 ↗
10. Optimizing adhesion of laser structured plated Ni-Cu contacts with insights from micro characterization10.1016/j.egypro.2016.07.101 ↗
11. 21.8% efficient n-type solar cells with industrially feasible plated metallization10.1016/j.egypro.2014.08.116 ↗
12. Microstructure analysis of the interface situation and adhesion of thermally formed nickel silicide for plated nickel–copper contacts on silicon solar cells10.1016/j.solmat.2013.06.005 ↗
13. N. Song, P.-.C. Hsiao, W. Zhang, X. Wang, A. Lennon, Self-annealing behaviors of light induced plated copper fingers and rapid thermal processing effect, in: Proceedings of the 6th Workshop on Metallization & Interconnection for Crystalline Silicon Solar Cells, Konstanz, Germany, 2016.
14. Localization and characterization of annealing‐induced shunts in Ni‐plated monocrystalline silicon solar cells10.1002/pssr.201409036 ↗
15. Impact of Laser-Induced Oxidation on Silicon Wafer Solar Cells’ Performance10.1109/JPHOTOV.2016.2535243 ↗
16. General relationship for the thermal oxidation of silicon10.1063/1.1713945 ↗
17. Electron-active silicon oxidation10.1007/BF00615932 ↗
18. Ultraviolet laser‐induced oxidation of silicon: the effect of oxygen photodissociation upon oxide growth kinetics10.1063/1.341263 ↗
19. Selective laser ablation of SiNx layers on textured surfaces for low temperature front side metallizations10.1002/pip.856 ↗
20. Impact of surface topography and laser pulse duration for laser ablation of solar cell front side passivating SiNx layers10.1063/1.3493204 ↗
21. Femtosecond laser-induced removal of silicon nitride layers from doped and textured silicon wafers used in photovoltaics10.1016/j.tsf.2013.07.005 ↗
22. Kinetics of laser-induced oxidation of silicon near room temperature10.1007/s00339-005-3415-x ↗
23. Etch rates for micromachining processing-part II10.1109/JMEMS.2003.820936 ↗
24. Fuller · 2008 · 14623
25. J. Bartsch, A. Mondon, C. Schetter, M. Hörteis, S. Glunz, Copper as conducting layer in advanced front side metallization processes for crystalline silicon solar cells, exceeding 20% on printed seed layers, in: Proceedings of the 35th IEEE Photovoltaic Specialists Conference (PVSC), 2010, pp. 001299–001303.10.1109/PVSC.2010.5614244 ↗
26. Obtaining the specific contact resistance from transmission line model measurements10.1109/EDL.1982.25502 ↗
27. Three‐dimensional electron microscopy simulation with the CASINO Monte Carlo software10.1002/sca.20262 ↗
28. Spectrum simulation in DTSA-II10.1017/S1431927609990407 ↗
29. Growth of native oxide on a silicon surface10.1063/1.347181 ↗