Energy and emissions analysis of next generation electrochromic devices
Source abstract
Abstract
Abstract The impact of buildings on the environment, energy consumption and climate change is significant, as they use a large amount of resources across their life-cycle. Since windows play an important role in the overall energy and environmental performance of buildings, emerging technologies are focused on the optimization of these building components. Among window design technologies, electrochromic (EC) devices have received growing interest for their ability to dynamically manage the daylight and solar energy entering buildings. Near-infrared switching electrochromic (NEC) glazed windows use a novel EC window technology that is able to continuously provide high transparency while modulating solar heat gains. This study evaluated the manufacturing phase of NEC windows to understand if their use phase performance comes at acceptable manufacturing burdens. This study also identified which constraints are connected to the market shift to the novel technology, which can provide the research community with useful information to better design the technology as it develops. A comparative “cradle-to-gate” energy and emissions analysis was carried out between NEC and conventional EC windows. The obtained results for the Global Warming Potential of the conventional EC device was 85 kg CO2-eq/m2 and the Cumulative Energy Demand was 1680 MJ-eq/m2. Results for the NEC device were found to be 50 kg CO2-eq/m2 and 1050 MJ-eq/m2, with the reduction primarily due to replacing the energy intensive thin film deposition used in conventional EC with a solution-based coating process. Finally, when an entire window is modeled (EC device, frame, glazing and sealing), the difference over conventional EC, in terms of primary energy consumption, ranged for the whole window manufacturing from 15% to 21%, depending on the material of the frame.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Transition Metal Oxide Nanomaterials · Gas Sensing Nanomaterials and Sensors · TiO2 Photocatalysis and Solar Cells
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. EU Directive 2010/31/CE on the energy performance of buildings (EPBD).
2. UNEP-SBCI, United Nation's Environment Programme's Sustainable Building and Climate Initiative.
3. Life cycle analysis in the construction sector: guiding the optimization of conventional Italian buildings10.1016/j.enbuild.2013.04.018 ↗
4. A. Gustavsen, B.P. Jelle, D. Arasteh, C. K., State-of-the-Art highly insulating window frames – Research and Market Review, 2007.10.2172/941673 ↗
5. Theoretical modelling and experimental evaluation of the optical properties of glazing systems with selective coatings10.1007/s12273-009-9112-5 ↗
6. K. Allaker, C. Baldassarri, M. Calero, F. Mathieux, Y. R., Using life cycle based environmental assessment in developing innovative multi-functional glass-polymer windows, in: Proceedings of the Sustainable Building Conference, Graz, Austria, 2013.
7. Fenestration of today and tomorrow: a state-of-the-art review and future research opportunities10.1016/j.solmat.2011.08.010 ↗
8. A life cycle approach to Green Public Procurement of building materials and elements: a case study on windows10.1016/j.energy.2011.01.039 ↗
9. Properties, requirements and possibilities of smart windows for dynamic Daylight and solar energy control in buildings: a state-of-the-art review10.1016/j.solmat.2009.08.021 ↗
10. E.-S. Lee, Advancement of Electrochromic Windows, in: PftC.E. Commission (Ed.), LBNL, 2006.10.2172/899732 ↗
11. Metal oxide films for electrochromic applications: present technology and future directions10.1039/c0jm00604a ↗
12. J. Bechtel, K. Isono, S. Lounis, C. W., Cleantech to market: Electrochromic Coating For Dynamic Control, 2011.
13. D.-R. Roberts, Preliminary Assessment of the Energy-Saving Potential of Electrochromic Windows in Residential Buildings, in, 2009, pp. 12.10.2172/969720 ↗
14. Electrochromic oxides: a band structure approach10.1016/0927-0248(94)90100-7 ↗
15. E.S. Lee, S.E. Selkowitz, R.D. Clear, D.L. Di Bartolomeo, J.H. Klems, L.L. Fernandes, G.J. Ward, V. Inkarojrit, M. V., A Design Guide for Early- Market Electrochromic Windows, Berkeley, 2006.10.2172/898284 ↗
16. Polyoxometalates and colloidal nanocrystals as building blocks for metal oxide nanocomposite films10.1039/c1jm10514k ↗
17. Dynamically modulating the surface plasmon resonance of doped semiconductor nanocrystals10.1021/nl202597n ↗
18. Regional performance targets for transparent near-infrared switching electrochromic window glazings10.1016/j.buildenv.2012.12.004 ↗
19. United States energy and CO2 savings potential from deployment of near-infrared electrochromic window glazings10.1016/j.buildenv.2015.02.021 ↗
20. Advanced electrochromic devices based on WO3 thin films10.1016/S0013-4686(01)00393-0 ↗
21. Environmental assessment of electrochromic glazing production10.1016/j.solmat.2004.03.005 ↗
22. Eco-efficiency evaluation of a smart window prototype10.1016/j.scitotenv.2005.10.023 ↗
23. Energy performance assessment of an electrochromic window10.1016/j.tsf.2005.07.294 ↗
24. Mitzi · 2009
25. Environmental assessment of electrically controlled variable light transmittance devices10.1039/c2ra20148h ↗
26. R.L. Moss, E. T., H. Kara, P. Willis, J. Kooroshy, Critical Metals in Strategic Energy Technologies, JRC scientific and Technical Reports, European Commission Joint Research Centre Institute.
27. Indium-Corporation, Indium Gallium & Germanium. Supply & Price outlook, 2010.
28. Ecorys, Final Report Client: European Commission-DG Environment Rotterdam-Mapping resource prices: the past and the future, 2012.
29. Fabrication and processing of polymer solar cells: a review of printing and coating techniques10.1016/j.solmat.2008.10.004 ↗
30. Life cycle assessment of ITO-free polymer solar cell prepared by roll-to-roll coating and printing10.1016/j.solmat.2011.09.048 ↗
31. Life cycle analysis of organic photovoltaic technologies10.1002/pip.967 ↗
32. A life cycle analysis of polymer solar cell modules prepared using roll-to-roll methods under ambient conditions10.1016/j.solmat.2010.08.020 ↗
33. Tunable near-infrared and visible-light transmittance in nanocrystal-in-glass composites10.1038/nature12398 ↗
34. E.S. Lee, M. Yazdanian, S.E. S., Energy-savings potential of Electrochromic Windows in the US Commercial Building Sector, 2004.10.2172/891618 ↗
35. C. Baldassarri, F. Mathieux, F. Ardente, C. Wehmann, K. Deese, Integration of environmental aspects into R&D inter-organizational projects management: application of a life cycle-based method to the development of innovative windows, J. Clean. Prod. 112 (Part 4) (2016) 3388–3401. http://dx.doi.org/10.1016/j.jclepro.2015.09.04410.1016/j.jclepro.2015.09.044 ↗
36. PRé Consultants, M. Goedkoop, M. Oele, A. de Schryver, M. Vieira, SimaPro 7 Database Manual Methods Library, 2008.
37. Kellenberger · 2007
38. Hischier · 2007
39. H.-J. Althaus, M. Chudacoff, R. Hischier, N. Jungbluth, M. Osses, A. P., Life Cycle Inventories of Chemicals. Final Report Ecoinvent Data v2.0 N.8, 2007.
40. Classen · 2009
41. Hischier · 2007
42. Model: DJW Series Horizontal Magnetron Sputtering Production Line for Glass Coating. 〈www.fdsglass.com〉
43. T. Gutowsky, J. Dumas, A. T., Electrical energy requirements for manufacturing processes, in: Proceedings of the 13th CIRP International Conference on Life Cycle Engineering. May 31st–June 2nd, 2006, Leuven, 2006.
44. An example of a commercially available roll coating platform for R2R applications. 〈www.solarcoating.de〉.
45. En examination of existing data for the industrial manufacture and use of nanocomponents and their role in the life cycle impact of nanoproduct10.1021/es8023258 ↗
46. Roll-to-roll fabrication of polymer solar cells10.1016/S1369-7021(12)70019-6 ↗
47. I.C.M.U.G. Design, Economic Input-Output Life Cycle Assessment (EIO-LCA), US 1997 Industry Benchmark model, 2008. 〈http://www.eiolca.net〉.
48. Influence of cavities geometric and emissivity properties on the overall thermal performance of aluminum frames for windows10.1016/j.enbuild.2013.01.028 ↗
49. Life cycle assessment of recycling PVC window frames10.1016/j.resconrec.2012.12.005 ↗
50. Energy and environmental performance optimization of windows: a holistic approach10.1016/j.enbuild.2014.05.010 ↗
51. Life cycle assessment of engineered nanomaterials: state of the art and strategies to overcome existing gaps10.1016/j.scitotenv.2012.03.001 ↗