journal article·2014-07

Electrochromic performance of nanocomposite nickel oxide counter electrodes containing lithium and zirconium

Feng Lin, Manuel Montano, Chixia Tian, Yazhou Ji, Dennis Nordlund, Tsu-Chien Weng, Rob G. Moore, Dane T. Gillaspie, Kim M. Jones, Anne C. Dillon, Ryan M. Richards, Chaiwat Engtrakul

Publisher page

Abstract

Abstract Nickel oxide materials are suitable for counter electrodes in complementary electrochromic devices. The state-of-the-art nickel oxide counter electrode materials are typically prepared with multiple additives to enhance peformance. Herein, nanocomposite nickel oxide counter electrodes were fabricated via RF magnetron co-sputtering from Ni–Zr alloy and Li2O ceramic targets. The as-deposited nanocomposite counter electrodes were characterized with inductively coupled plasma mass spectrometry (ICP-MS), scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM), X-ray diffraction (XRD), and X-ray absorption spectroscopy (XAS). It was found that the stoichiometry, crystal structure and electronic structure of the nickel oxide-based materials could be readily tuned by varying the Li2O sputter deposition power level. Comprehensive electrochromic evaluation demonstrated that the performance of the nickel oxide-based materials was dependent on the overall Li stoichiometry. Overall, the nanocomposite nickel oxide counter electrode containing lithium and zirconium synthesized with a Li2O deposition power of 45 W exhibited the optimal performance with an optical modulation of 71% and coloration efficiency of 30 cm2/C at 670 nm in Li-ion electrolyte.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Transition Metal Oxide Nanomaterials · Conducting polymers and applications · Gas Sensing Nanomaterials and Sensors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. Nanocomposite counter electrode materials for electrochromic windows10.1149/1.3276779 ↗
2. Metal-oxide films for electrochromic applications: present technology and future directions10.1039/c0jm00604a ↗
3. Electrochromics for smart windows: thin films of tungsten oxide and nickel oxide, and devices based on these10.1039/B612174H ↗
4. Ozone coloration of Ni and Cr oxide films10.1016/S0927-0248(02)00213-1 ↗
5. Increasing performance of electrochromic devices by modifying surface and charge ratio between electrodes10.1016/j.solmat.2011.06.019 ↗
6. Cycle test and degradation analysis of WO(3)/PC+LiClO(4)/CeO(2)center dot TiO(2) electrochromic device10.1016/j.solmat.2009.07.007 ↗
7. Fast-switching electrochromic Li+-doped nio films by ultrasonic spray deposition10.1149/1.3279992 ↗
8. Low-temperature ozone exposure technique to modulate the stoichiometry of WOx nanorods and optimize the electrochromic performance10.1088/0957-4484/23/25/255601 ↗
9. Electrochromic behavior of WO(3) nanotree films prepared by hydrothermal oxidation10.1016/j.solmat.2011.03.008 ↗
10. Highly crystalline WO(3) thin films with ordered 3D mesoporosity and improved electrochromic performance10.1002/smll.200600176 ↗
11. In situ crystallization of high performing WO3-based electrochromic materials and the importance for durability and switching kinetics10.1039/c2jm32742b ↗
12. Ultrasonic spray deposition of high performance WO3 films using template-assisted sol–gel chemistry10.1016/j.elecom.2012.09.017 ↗
13. Electrochromic degradation in nickel oxide thin film: a self-discharge and dissolution phenomenon10.1016/j.electacta.2005.01.020 ↗
14. Characterization of Ni–W oxide thin film electrodes10.1016/S0167-2738(98)00093-9 ↗
15. Improved cyclability by tungsten addition in electrochromic NiO thin films10.1016/j.solmat.2005.01.018 ↗
16. Application of 1/f current noise for quality and age monitoring of electrochromic devices10.1016/j.solmat.2008.02.035 ↗
17. Improved electrochromic performances of NiO based thin films by lithium addition: from single layers to devices10.1016/j.electacta.2012.03.123 ↗
18. Electrochromic properties of LixNiyO films deposited by RF magnetron sputtering10.1149/1.3141704 ↗
19. Hole doping in Al-containing nickel oxide materials to improve electrochromic performance10.1021/am302097b ↗
20. Origin of electrochromism in high-performing nanocomposite nickel oxide10.1021/am400105y ↗
21. Crystalline WO3 nanoparticles for highly improved electrochromic applications10.1002/adma.200501953 ↗
22. Ligand hole induced symmetry mixing of d8 states in LixNi1−xO, as observed in Ni 2p X-ray absorption-spectroscopy10.1016/0038-1098(91)90600-Z ↗
23. Doping dependence of Ni 2p X-ray-absorption spectra of M(x)Ni(1−x)O (M=Li,Na)10.1103/PhysRevB.50.11326 ↗
24. Comment on “near-edge X-ray absorption fine-structure investigation of graphene”10.1103/PhysRevLett.102.099701 ↗
25. Changes in electronic structure of the electrochemically Li-ion deintercalated LiNiO2 system investigated by soft X-ray absorption spectroscopy10.1016/j.jpowsour.2006.02.013 ↗
26. Electrochromism in nickel oxide films containing Mg, Al, SiV, Zr, Nb, Ag, or Ta10.1016/j.solmat.2003.11.032 ↗