journal article·2002-10

Error diagnosis and optimisation of c-Si solar cell processing using contact resistances determined with the Corescanner

A.S.H van der Heide, J.H Bultman, J Hoornstra, A Schönecker

Publisher page

Abstract

Abstract The screen-printing metallisation process used for 90% of industrially produced solar cells is sensitive to process conditions. The best way to monitor this contacting process is to measure contact resistance. The standard technique used is the transmission line method. However, this only measures contact resistance locally. In this paper, contact resistance over the whole cell surface is measured with the newly developed ‘Corescanner’. Using this instrument, the relation between processing parameters and solar cell contact resistance distribution is investigated. Our most important finding is that poor contacting results in large inhomogeneities in contact resistance. Even for cells with very low fill factors, regions of low contact resistance can be found. To conclude, the Corescanner provides us with a technique to monitor contact resistance. This instrument is an invaluable tool for fault detection, error diagnosis and process optimisation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Industrial Vision Systems and Defect Detection

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (4)

Show source-provided references
1. A.S.H. van der Heide, H.D. Dokter, Dutch patent NL1013204, applied 4 October 1999, granted 5 April 2001.
2. A.S.H. van der Heide, A. Schönecker, G.P. Wyers, W.C. Sinke, Proceedings of the 16th European Photovoltaic Solar Energy Conference, Glasgow, 2000.
3. Berger · J. Electrochem. Soc. · 1972 · 119 · 50710.1149/1.2404240 ↗
4. Reeves · IEEE Electron Device Lett. · 1982 · 3 · 11110.1109/EDL.1982.25502 ↗