journal article·2015-12

Advanced characterization of electrodeposition-based high efficiency solar cells: Non-destructive Raman scattering quantitative assessment of the anion chemical composition in Cu(In,Ga)(S,Se)2 absorbers

C. Insignares-Cuello, F. Oliva, M. Neuschitzer, X. Fontané, C. Broussillou, T. Goislard de Monsabert, E. Saucedo, C.M. Ruiz, A. Pérez-Rodríguez, V. Izquierdo-Roca

Publisher page

Abstract

Abstract This work reports a detailed comparative study of electrodeposition-based (ED) cells fabricated with S-free Cu(In,Ga)Se 2 and S-containing Cu(In,Ga)(S,Se) 2 absorbers. ED based processes have a strong interest, because of their potential for cost reduction. ED of metal precursors followed by Rapid Thermal Process (RTP) with elemental Se and S has demonstrated to successfully obtain 60×120 cm 2 modules up to 14% aperture area (AA) efficiency. In this work, the impact of the presence of S in the surface region of the absorbers is analyzed in detail. The results show the possibility to obtain high efficiency, reproducible cells by careful control of this parameter, which is assessed by Raman scattering. Standard techniques for surface S content measurement are limited due to either overall composition estimation (X-ray diffraction), overlap of S and Mo signals (X-ray fluorescence) or their need for handling samples under vacuum conditions and/or their destructive character (inductively coupled plasma mass spectroscopy, secondary ions mass spectroscopy, energy dispersive X-ray spectroscopy, X-ray photoelectron spectroscopy…). In this framework Raman scattering is interesting as it is non-destructive and very sensitive to both composition and crystal quality. This work proposes a Raman scattering based methodology for the quantitative analysis of the anion composition ratio in the surface region of the absorbers, providing with a simple non-destructive assessment procedure of this relevant parameter.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. M. Hagmann, A new world record for solar cell efficiency, EMPA press release, 2013. [Online]. Available: 〈http://www.empa.ch/plugin/template/empa/1/131438/---/l=2〉.
2. Properties of Cu(In,Ga)Se2 solar cells with new record efficiencies up to 21.7%10.1002/pssr.201409520 ↗
3. NEXCIS achieves a new record performance @ 17.3% certified pixel measurement with its CIGS PV technology 2014. [Online]. Available: 〈www.nexcis.fr〉.
4. G. Brown P. Stone J. Woodruff B. Cardozo D. Jackrel, Device characteristics of a 17.1% efficient solar cell deposited by a non-vacuum printing method on flexible foil, in: Proceedings of the Conference Record of the IEEE Photovoltaic Specialists Conference 2012, pp. 3230–3233.10.1109/PVSC.2012.6318265 ↗
5. Influence of different sulfur to selenium ratios on the structural and electronic properties of Cu(In,Ga)(S,Se)2 thin films and solar cells formed by the stacked elemental layer process10.1063/1.4900991 ↗
6. Fabrication of pentanary Cu(InGa)(SeS)2 absorbers by selenization and sulfurization10.1016/j.solmat.2009.02.004 ↗
7. D. Tarrant and J. Ermer, I-III-VI2 multinary solar cells based on CuInSe2, in: Proceedings of the Conference Record of the Twenty Third IEEE Photovoltaic Specialists Conference, 1993 (Cat. No.93CH3283-9), pp. 372–378.10.1109/PVSC.1993.347153 ↗
8. Role of incorporated sulfur into the surface of Cu(InGa)Se2 thin-film absorber10.1016/S0927-0248(00)00288-9 ↗
9. Improved CIGS thin-film solar cells by surface sulfurization using In2S3 and sulfur vapor10.1016/S0927-0248(00)00290-7 ↗
10. Assessment of absorber composition and nanocrystalline phases in CuInS2 based photovoltaic technologies by ex-situ/in-situ resonant Raman scattering measurements10.1016/j.solmat.2010.11.014 ↗
11. Process monitoring of chalcopyrite photovoltaic technologies by Raman spectroscopy: an application to low cost electrodeposition based processes10.1039/C0NJ00794C ↗
12. Abou-Ras · 2011
13. Investigation of compositional inhomogeneities in complex polycrystalline Cu(In,Ga)Se2 layers for solar cells10.1063/1.3280049 ↗
14. Electrochemical synthesis of CuIn(S,Se)2 alloys with graded composition for high efficiency solar cells10.1063/1.3080654 ↗
15. Raman scattering analysis of electrodeposited Cu(In,Ga)Se2 solar cells: impact of ordered vacancy compounds on cell efficiency10.1063/1.4890970 ↗
16. Impact of electronic defects on the Raman spectra from electrodeposited Cu(In,Ga)Se2 solar cells: application for non-destructive defect assessment10.1063/1.4793418 ↗
17. Raman scattering quantitative analysis of the anion chemical composition in kesterite Cu2ZnSn(SxSe1−x)4 solid solutions10.1016/j.jallcom.2014.12.175 ↗
18. C. Insignares-Cuello, F. Oliva, X. Fontané, C. Broussillou, T. Goislard de Monsabert, E. Saucedo, A. Perez-Rodriguez, V. Izquierdo-Roca, Non-destructive assessment of advanced Cu(In,Ga)(S,Se)2 technologies for on-line proves monitoring: development of a multi-excitation wavelength Raman/Photoluminescence system, Photovoltaic Technical Conference PVTC, 2015.
19. Formation mechanisms of Cu(In,Ga)Se2 solar cells prepared from electrodeposited precursors10.1016/j.tsf.2012.11.106 ↗
20. Secondary barriers in CdS–CuIn1−xGaxSe2 solar cells10.1063/1.1850604 ↗
21. Optimization of CdS buffer layer for high-performance Cu2ZnSnSe4 solar cells and the effects of light soaking: elimination of crossover and red kink10.1002/pip.2589 ↗
22. M. Burgelman. Analysis of graded band gap solar cells with SCAPS, 23rd Eur. Photovolt. Sol., no. September 2008, pp. 1–5.
23. Raman scattering in CuInS2xSe2(1−x) mixed crystals
24. Advanced diagnostic and control methods of processes and layers in CIGS solar cells and modules10.1002/pip.966 ↗
25. V. Izquierdo Roca. Análisis por espectroscopia Raman de nuevas tecnologías de células solares de CuIn(S,Se)2 de bajo coste basadas en procesos electroquímicos, Universidad de Barcelona, 2011.