Nanoparticles based single and tandem stable solar selective absorber coatings with wide angular solar absorptance
Source abstract
Abstract
Solar selective absorber coatings with wide angular solar absorptance aids in attaining high photo-thermal conversion efficiency for solar thermal systems. In this regard, nanoparticles-based absorber coatings were developed on stainless steel grade 304 by combining the impregnation method, solvothermal process, and dip-coating technique. Developed nanocomposite (SiO 2 nanoparticles in transition metal oxide matrix) based single layer absorber coating with nano void textured surface, exhibits solar absorptance of 0.92 and spectral emittance of 0.12. MgF 2 nanoparticles based anti-reflective layer on single-layer absorber coating improves the solar absorptance to 0.94 by destructive interference mechanism. Both nanoparticles based single and tandem absorber coatings show wide angular solar absorptance of 0.88 and 0.89, respectively, at an incidence angle of 50°. Besides, developed absorber coatings show lower thermal emissivity of 0.17 and good photo-thermal conversion efficiencies at high operating temperatures (400–500 °C). These developed absorber coatings offer excellent thermal stability at an open atmospheric condition till operating temperature, such as 400 °C for 100 h. Selective nature with wide angular solar absorptance and low heat loss behaviour of stable absorber coating show the photo-thermal conversion efficiency of 91% can improve the performance of receiver tubes in solar thermal systems.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Solar Thermal and Photovoltaic Systems · Solar-Powered Water Purification Methods · solar cell performance optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Renewable and non-renewable energy-growth-emissions linkages: review of emerging trends with policy implications10.1016/j.rser.2016.11.178 ↗
2. A case study on PV system performance and LCOE of 15.6 kW hybrid solar PV system installed at CST
3. Morales · 2017 · 59
4. Coatings for concentrating solar systems - a review10.1016/j.rser.2015.01.015 ↗
5. Concentrating solar power10.1021/acs.chemrev.5b00397 ↗
6. Angular solar absorptance and thermal stability of W/WAlN/WAlON/Al2O3-based solar selective absorber coating10.1016/j.applthermaleng.2016.04.069 ↗
7. Angular solar absorptance and thermal stability of Mo-SiO2 double cermet solar selective absorber coating10.1016/j.solener.2015.02.013 ↗
8. Angular solar absorptance and incident angle modifier of selective absorbers for solar thermal collectors10.1016/S0038-092X(00)00029-3 ↗
9. Computational design for a wide-angle cermet-based solar selective absorber for high temperature applications10.1016/j.jqsrt.2013.03.004 ↗
10. Selective properties of high-temperature stable spinel absorber coatings for concentrated solar thermal application10.1016/j.solener.2020.02.048 ↗
11. Design of wide-angle solar-selective absorbers using aperiodic metal-dielectric stacks10.1364/OE.17.022800 ↗
12. Enhanced absorptance of surface-textured tungsten thin film for solar absorber10.1080/02670844.2016.1187466 ↗
13. Cu(Mn0.748Ni0.252)2O4/SiO2 nanoparticle layers for wide-angle spectral selectivity and high thermal stability10.1021/acsanm.0c01363 ↗
14. Scalable, “dip-and-dry” fabrication of a wide-angle plasmonic selective absorber for high-efficiency solar–thermal energy conversion10.1002/adma.201702156 ↗
15. Angular solar absorptance of absorbers used in solar thermal collectors10.1364/AO.38.004189 ↗
16. Nanostructures for enhanced light absorption in solar energy devices10.1155/2011/939807 ↗
17. Application of nanoparticles in solar collectors: a review
18. Nanostructured materials for solar energy conversion
19. Optical properties and thermal stability evaluation of solar absorbers enhanced by nanostructured selective coating films10.1016/j.powtec.2020.09.040 ↗
20. High efficient and wide-angle solar absorption with a multilayered metal-dielectric film structure10.1016/j.vacuum.2017.09.051 ↗
21. Broadband polarization-insensitive and wide-angle solar energy absorber based on tungsten ring-disc array10.1039/D0NR04502K ↗
22. Photothermal conversion application of the transition metal (Cu.Mn.Co.Cr. And Fe) oxides with spinel structutre
23. A highly thermally stable Mn-Cu-Fe composite oxide based solar selective absorber layer with low thermal loss at high temperature10.1016/j.jallcom.2015.05.038 ↗
24. Development of cost efficient solar receiver tube with a novel tandem absorber system10.1016/j.applthermaleng.2016.05.163 ↗
25. Transition metal based CuxNiyCoz-x-yO4 spinel composite solar selective absorber coatings for concentrated solar thermal applications10.1016/j.solmat.2018.09.033 ↗
26. Nickel doped cobaltite spinel as a solar selective absorber coating for efficient photothermal conversion with a low thermal radiative loss at high operating temperatures
27. The effect of substrate roughness on the surface structure of TiO2 , SiO2 , and doped thin films prepared by the sol-gel method
28. Surface modification of SiO2 nanoparticles and its impact on the properties of PES-based hollow fiber membrane10.1039/C5RA07527K ↗
29. Effect of embedding silica nanoparticles and voids in the performance of c-Si solar cells
30. Influence of surface morphology on absorptivity of light-absorbing materials10.1155/2019/1476217 ↗
31. Nanoparticulate materials densification10.1016/S0965-9773(96)00046-3 ↗
32. Fe2O3 films on stainless steel for solar absorbers10.1016/j.rser.2015.12.263 ↗
33. Determination of the Cu 2p primary excitation spectra for Cu, Cu2O and CuO10.1016/j.susc.2013.10.009 ↗
34. Spectroscopic studies of Nickel(II) and Nickel(III) species generated upon thermal treatments of Nickel/Ceria-supported materials
35. Oxidation of MnO(100) and NaMnO2 formation: characterization of Mn2+ and Mn3+ surfaces via XPS and water TPD10.1016/j.susc.2018.04.022 ↗
36. Characterization and applications of nanoparticles modified in-flight with silica or silica-organic coatings10.3390/nano8070530 ↗
37. A new green methodology for surface modification of diatomite filler in elastomers10.1016/j.matchemphys.2017.03.050 ↗
38. XPS analysis of the oxidation of Ag-MgF2 cermet film10.1016/S0042-207X(98)00196-1 ↗
39. Effects of the LMVF and HMVF absorption layer thickness and metal volume fraction on optical properties of the MoSi2-Al2O3 solar selective absorbing coating10.1016/j.vacuum.2014.01.022 ↗
40. A comparative analysis of opto-thermal figures of merit for high temperature solar thermal absorber coatings10.1016/j.rser.2021.111818 ↗
41. Performance analysis of parabolic trough collectors with double glass envelope10.1016/j.renene.2018.06.024 ↗