Experimental study on storage performance of packed bed solar thermal energy storage system using sintered ore particles
Source abstract
Abstract
To cope with the mismatch between solar energy generation and demand, developing thermal energy storage systems is necessary. Due to its low construction and operating costs and wide operating temperature range, the packed bed sensible heat storage system using air as the heat transfer fluid is becoming more and more popular. This paper proposes to use sintered ore particles as a sensible heat storage material. An experimental study is conducted to investigate the air resistance characteristics and thermal behavior of the sinter bed. Moreover, the effects of particle size, charging temperature, air flow and cycle times on storage performance of the bed are studied. The results show that the sinter bed has good thermal performance. The specific heat of the sinter is 0.86–0.98 J/g/°C in the range of 200–380 °C, which increases as the temperature rises. When the thermal storage system enters a stable operation state, the cycle efficiency of the sinter bed can reach 66.78%. In addition, due to the unique production process, sinter has the potential to improve its thermal properties by optimizing the ratio of raw materials and/or adding other auxiliary materials.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Phase Change Materials Research · Adsorption and Cooling Systems · Solar Thermal and Photovoltaic Systems
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Performance assessment of heat transfer and friction characteristics of a packed bed heat storage system embedded with internal grooved cylinders10.1016/j.solener.2017.12.044 ↗
2. Thermal energy storage: “How previous findings determine current research priorities”10.1016/j.energy.2012.01.024 ↗
3. Thermal energy storage technologies and systems for concentrating solar power plants10.1016/j.pecs.2013.02.001 ↗
4. Effect of storage medium on thermal properties of packed beds10.1016/0890-4332(90)90201-T ↗
5. Experiment for modeling high temperature rock bed storage10.1016/0165-1633(91)90066-T ↗
6. Experimental investigation of thermal de-stratification in rock bed TES systems for high temperature applications10.1016/j.enconman.2014.05.005 ↗
7. Experimental study on heat storage and transfer characteristics of supercritical air in a rock bed10.1016/j.ijheatmasstransfer.2014.06.026 ↗
8. Performance study of a packed bed in a closed loop thermal energy storage system10.1016/j.energy.2014.09.073 ↗
9. Packed-bed thermal storage for concentrated solar power –Pilot-scale demonstration and industrial-scale design10.1016/j.solener.2012.07.019 ↗
10. High-temperature thermal storage using a packed bed of rocks-Heat transfer analysis and experimental validation10.1016/j.applthermaleng.2010.10.034 ↗
11. A comparison of experimental thermal stratification parameters for an oil/pebble-bed thermal energy storage (TES) system during charging10.1016/j.apenergy.2011.06.019 ↗
12. Using sand and other small grained materials as heat storage medium in a packed bed HTTESS, International Conference on Concentrating Solar Power and Chemical Energy Systems, Solar PACES 201410.1016/j.egypro.2015.03.202 ↗
13. The influence of the shape of granite on the heat storage process in a rock bed10.3390/en13215662 ↗
14. Experimental determination of the influence of shape on the heat transfer process in a crushed granite storage bed10.3390/en13246725 ↗
15. A granite bed storage for a small solar dryer10.3390/ma11101969 ↗
16. Flexibility and robustness of a high-temperature air/ceramic thermocline heat storage pilot10.1016/j.est.2018.11.034 ↗
17. Experimental and numerical analysis of a packed-bed thermal energy storage system designed to recover high temperature waste heat: an industrial scale up10.1016/j.est.2020.101894 ↗
18. Experimental study of thermal behavior during charging in a thermal energy storage packed bed using radial pipe injection10.1016/j.applthermaleng.2020.115804 ↗
19. Pebble bed regenerator and storage system for high temperature use10.1016/j.apenergy.2012.10.062 ↗
20. Experimental research of the heat transfer characteristics using a packed-bed of honeycomb ceramic for high temperature thermal storage system, International Conference on Concentrating Solar Power and Chemical Energy Systems, Solar PACES 201410.1016/j.egypro.2015.03.209 ↗
21. Study on standby process of an air-based solid packed bed for flexible high-temperature heat storage: experimental results and modelling10.1016/j.apenergy.2019.01.073 ↗
22. A study of a packed-bed thermal energy storage device: test rig, experimental and numerical results, 69th Conference of the Italian Thermal Engineering Association
23. Comparison between experimental and numerical results of a packed-bed thermal energy storage system in continuous operation10.1016/j.egypro.2018.08.073 ↗
24. Experimental investigation of heat transfer and fluid flow behavior of packed bed solar thermal energy storage system having spheres as packing element with pores10.1016/j.solener.2020.05.024 ↗
25. Benchmarking study of demolition wastes with different waste materials as sensible thermal energy storage10.1016/j.solmat.2020.110777 ↗
26. Performance of laboratory scale packed-bed thermal energy storage using new demolition waste based sensible heat materials for industrial solar applications10.1016/j.solener.2020.10.070 ↗
27. 3-D Transient conjugated heat transfer and fluid flow analysis for the cooling process of sintered bed10.1016/j.applthermaleng.2009.02.012 ↗
28. Energy and exergy analysis for waste heat cascade utilization in sinter cooling bed10.1016/j.energy.2013.11.086 ↗
29. A comprehensive characterization on the structural and thermophysical properties of sintered ore particles toward waste heat recovery applications10.1016/j.applthermaleng.2015.07.071 ↗
30. Pressure drop in a packed bed with sintered ore particles as applied to sinter coolers with a novel vertically arranged design for waste heat recovery10.1631/jzus.A1500088 ↗
31. Wall effects on the pressure drop in packed beds of irregularly shaped sintered ore particles10.1016/j.powtec.2016.07.073 ↗
32. Elucidation of mean voidage in packed beds10.1002/cjce.5450690425 ↗
33. Numerical simulations of single phase reacting flows in randomly packed fixed-bed reactors and experimental validation10.1016/S0009-2509(02)00622-X ↗
34. Improvement in the permeability of sintering beds by drying treatment after granulating sinter raw materials containing concentrates10.1016/j.apt.2020.06.017 ↗
35. A regenerative heat storage system for central receiver technology working with atmospheric air
36. Computational study of performance of cascaded multi-layered packed-bed thermal energy storage for high temperature applications10.1016/j.est.2020.101930 ↗
37. Experimental analysis of a domestic electric hot water storage tank. Part II: dynamic mode of operation10.1016/j.applthermaleng.2006.05.004 ↗
38. Describing the uncertainties in experimental results10.1016/0894-1777(88)90043-X ↗
39. Modification of Ergun's correlation in vertical tank for sinter waste heat recovery10.1016/j.powtec.2015.04.033 ↗
40. Experimental study of gas flow characteristics in vertical tank for sinter waste heat recovery10.1016/j.applthermaleng.2015.07.050 ↗