journal article·2022-03

Reducing the formation of Sb2O3 phase and selenium vacancy in Sb2Se3 thin film solar cells via hydrogen-assisted selenization

Yi-Cheng Lin, Yu-Kai Fei, Yu-Jen Hung

Publisher page

Abstract

In this study, we investigated the influence of Sb 2O 3 or selenium vacancies (V se) on the characteristics of Sb 2Se 3 films, and developed a novel hydrogen-assisted selenization (HAS) scheme aimed at reducing the formation of Sb 2O 3 and V se in the absorber layer of Sb 2Se 3 solar cells. In experiments, subsurface Sb 2O 3 formation was more pronounced in RF samples than in DC samples. An Sb 2Se 3 absorber prepared using RF sputtering without HAS converted from p-type conductivity to n-type conductivity, which reduced the J SC values and device efficiency. Furthermore, the Sb 2O 3 phase that formed on the surface of the Sb 2Se 3 film acted as a channel for current flow, which greatly increased current leakage at p-n junction interfaces. Our results indicate that the formation of Sb 2O 3 phase can lead to a Se-poor state, resulting in the formation of V Se defects in the Sb 2Se 3 absorber layer, with a corresponding decrease in Jsc. The HAS process was shown to reduce the formation of Sb 2O 3 and V se in the Sb 2Se 3 absorber, resulting in device efficiency of 6.16% and Jsc of 27.57 mA/cm 2, the highest ever recorded for Sb 2Se 3 thin film solar cells prepared via sputtering.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Phase-change materials and chalcogenides

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Thermal evaporation and characterization of Sb2Se3 thin film for substrate Sb2Se3/CdS solar cells10.1021/am502427s ↗
2. 6.5% Certified efficiency Sb2Se3 solar cells using PbS colloidal quantum dot film as hole-transporting layer10.1021/acsenergylett.7b00648 ↗
3. 9.2 %-Efficient core-shell structured antimony selenide nanorod array solar cells10.1038/s41467-018-07903-6 ↗
4. Highly efficient and stable planar heterojunction solar cell based on sputtered and post-selenized Sb2Se3 thin film
5. Enhanced performance of the Sb2Se3 thin-film solar cell by organic molecule-induced crystallization and suppression of the interface recombination10.1021/acsaem.1c00640 ↗
6. Suppressing the trapping process by interfacial charge extraction in antimony selenide heterojunctions10.1021/acsenergylett.0c02660 ↗
7. Interfacial engineering for high efficiency solution processed Sb2Se3 solar cells10.1016/j.solmat.2018.09.020 ↗
8. Electrodeposition of antimony selenide thin films and application in semiconductor sensitized solar cells10.1021/am405416a ↗
9. Atomic layer deposition of an Sb2Se3 photoabsorber layer using selenium dimethyldithiocarbamate as a new Se precursor10.1021/acs.chemmater.9b02085 ↗
10. Direct hydrothermal deposition of antimony triselenide films for efficient planar heterojunction solar cells10.1021/acsami.1c02393 ↗
11. Vapor transport deposition of antimony selenide thin film solar cells with 7.6% efficiency10.1038/s41467-018-04634-6 ↗
12. Efficiency improvement of Sb2Se3 solar cells via grain boundary inversion10.1021/acsenergylett.8b01456 ↗
13. Influence of post-selenization temperature on the performance of substrate-type Sb2Se3 solar cells10.1021/acsaem.1c00657 ↗
14. An effective combination reaction involved with sputtered and selenized Sb precursors for efficient Sb2Se3 thin film solar cells10.1016/j.cej.2020.124599 ↗
15. Thermally induced structural evolution and performance of Sb2Se3 films and nanorods prepared by an easy sputtering method10.1016/j.solmat.2017.09.008 ↗
16. Sputtered and selenized Sb2Se3 thin-film solar cells with open-circuit voltage exceeding 500 mV
17. Controlled sputtering pressure on high-quality Sb2Se3 thin film for substrate configurated solar cells10.3390/nano10030574 ↗
18. Magnetron sputtered Sb2Se3-based thin films towards high performance quasi-homojunction thin film solar cells10.1016/j.solmat.2019.110154 ↗
19. Fabrication of Sb2Se3 thin film solar cells by co-sputtering of Sb2Se3 and Se targets10.1016/j.solener.2019.09.046 ↗
20. Enhanced open circuit voltage of Sb2Se3/CdS solar cells by annealing Se-rich amorphous Sb2Se3 films prepared via sputtering process10.1016/j.solener.2019.11.072 ↗
21. Antimony selenide thin-film solar cells10.1088/0268-1242/31/6/063001 ↗
22. Selenization of Sb2Se3 absorber layer: an efficient step to improve device performance of CdS/Sb2Se3 solar cells10.1063/1.4894170 ↗
23. Deciphering the role of key defects in Sb2Se3, a promising candidate for chalcogenide-based solar cells10.1021/acsaem.9b02192 ↗
24. A review of Sb2Se3 photovoltaic absorber materials and thin-film solar cells10.1016/j.solener.2020.03.009 ↗
25. Improving the performance of Sb2Se3 thin film solar cells over 4% by controlled addition of oxygen during film deposition10.1002/pip.2627 ↗
26. Electrodeposition of Fe-doped Sb2Se3 thin films for photoelectrochemical applications and study of the doping effects on their properties10.1007/s10008-017-3768-z ↗
27. Accelerated optimization of TiO2/Sb2Se3 thin film solar cells by high-throughput combinatorial approach10.1002/aenm.201700866 ↗
28. How oxygen exposure improves the back contact and performance of antimony selenide solar cells10.1021/acsami.0c14256 ↗
29. Improved efficiency of a large-area Cu(In,Ga)Se2 solar cell by a nontoxic hydrogen-assisted solid Se vapor selenization process10.1021/am405780z ↗
30. Water vapor in vacuum systems10.1016/0042-207X(95)00246-4 ↗
31. Analysis of grain orientation and defects in Sb2Se3 solar cells fabricated by close-spaced sublimation10.1016/j.solener.2021.07.022 ↗
32. 9.2%-efficient core-shell structured antimony selenide nanorod array solar cells
33. On the identification of Sb2Se3 using Raman scattering10.1557/mrc.2018.94 ↗
34. Chemical etching of Sb2Se3 solar cells: surface chemistry and back contact behavior10.1088/2515-7655/ab3c98 ↗
35. Investigating the role of grain boundaries in CZTS and CZTSSe thin film solar cells with scanning probe microscopy10.1002/adma.201103470 ↗