Effect of the double grading on the internal electric field and on the carrier collection in CIGS solar cells
Source abstract
Abstract
Abstract In this article, we look, from the carrier perspective, at the effect of the double grading in a CIGS absorber, in order to understand its benefit compared to a single grading. We focus on the double grading effects on the conduction band edge, generation rate and carrier collection. We first show that, when the minimum bandgap position (notch position) is outside of the absorber depletion region, a local maximum of the conduction band edge appears at the back of the depletion region, creating a hump, which hinders the collection of electrons. Interpreting the effect of the grading as an effective electric field, we show that the hump is caused by the competition between the absorber internal electric field and the grading created effective electric field. From this, we deduce that the notch should be positioned in the depletion region. As expected, the generation rate increases significantly at the notch position. However, studying carrier collection and the recombination rate, we show that, even if in the ideal case we should observe a total collection of carriers generated in the depletion region, the recombination rate in the SCR increases significantly when the notch is in it. We propose that this is caused by the increased carrier generation close to recombination centres. The ideal notch position is, therefore, a compromise between being close enough to the front to have a maximal carrier collection and avoiding the creation of a hump, while minimizing the carrier recombination.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Cd-free Cu(In, Ga)(Se, S)2 thin-film solar cell with record efficiency of 23.35%10.1109/JPHOTOV.2019.2937218 ↗
2. Cu(In,Ga)Se2 solar cells on a flexible polymer web
3. Cu(In,Ga)Se2 solar cells on a flexible polymer web10.1002/pip.605 ↗
4. Results of flight demonstration of terrestrial solar cells in space10.1002/pip.601 ↗
5. Annealing enhancement effect by light illumination on proton irradiated Cu(In,Ga)Se2 thin-film solar cells10.1143/JJAP.41.L797 ↗
6. Alternative buffers for chalcopyrite solar cells10.1016/j.solener.2004.06.018 ↗
7. Enhanced efficiency of Cd-free Cu(In,Ga)(Se, S)2 minimodule via (Zn,Mg)O second buffer layer and alkali metal post-treatment10.1109/JPHOTOV.2017.2745710 ↗
8. Single-crystal Cu(In,Ga)Se2 solar cells grown on GaAs substrates10.7567/APEX.11.082302 ↗
9. Large neutral barrier at grain boundaries in chalcopyrite thin films10.1103/PhysRevLett.104.196602 ↗
10. An investigation of band profile around the grain boundary of Cu(InGa)Se2 solar cell material by scanning probe microscopy10.1002/pip.1235 ↗
11. From 20.9 to 22.3% Cu(In,Ga)(S,Se)2 solar cell: Reduced recombination rate at the heterojunction and the depletion region due to K-treatment
12. Progress in thin film CIGS photovoltaics – research and development, manufacturing, and applications10.1002/pip.2811 ↗
13. Potassium-induced surface modification of Cu(In,Ga)Se2 thin films for high-efficiency solar cells10.1038/nmat3789 ↗
14. Direct evidence for grain boundary passivation in Cu(In,Ga)Se2 solar cells through alkali-fluoride post-deposition treatments10.1038/s41467-019-11996-y ↗
15. Influence of RbF post deposition treatment on heterojunction and grain boundaries in high efficient (21.1%) Cu(In,Ga)Se2 solar cells10.1016/j.nanoen.2019.03.028 ↗
16. Unveiling the effects of post-deposition treatment with different alkaline elements on the electronic properties of CIGS thin film solar cells10.1039/c4cp00614c ↗
17. Beneficial effect of post-deposition treatment in high-efficiency Cu(In,Ga)Se2 solar cells through reduced potential fluctuations10.1063/1.4960344 ↗
18. A new approach to high-efficiency solar cells by band gap grading in Cu(In,Ga)Se2 chalcopyrite semiconductors10.1016/S0927-0248(00)00274-9 ↗
19. Band offsets and optical bowings of chalcopyrites and Zn-based II-VI alloys10.1063/1.359901 ↗
20. Valence band structure of CuGa(S1−zSez)2 alloys10.1139/p86-007 ↗
21. Structural and electronic properties of polycrystalline Cu(In,Ga)(S,Se)2 alloys
22. Bandgap gradients in (Ag,Cu)(In,Ga)Se2 thin film solar cells deposited by three-stage co-evaporation
23. Device modeling and simulation of CIS-based solar cells
24. The comparison of (Ag,Cu)(In,Ga)Se2 and Cu(In,Ga)Se2 thin films deposited by three-stage coevaporation10.1109/JPHOTOV.2013.2280471 ↗
25. High VOC in (Cu,Ag)(In,Ga)Se2 solar cells10.1109/JPHOTOV.2017.2756058 ↗
26. The electronic structure of Cu(In1−xGax)Se2 alloyed with silver10.1016/j.tsf.2011.01.368 ↗
27. Theory of electronic states and transport in graded mixed semiconductors10.1103/PhysRev.177.1179 ↗
28. J.L. Gray, Youn Jung Lee, Numerical modeling of graded band gap CIGS solar cells, in: Proceedings of 1994 IEEE 1st World Conference on Photovoltaic Energy Conversion - WCPEC (A Joint Conference of PVSC, PVSEC and PSEC), Vol. 1, Dec 1994, pp. 123–126 vol. 1.10.1109/WCPEC.1994.519823 ↗
29. Computer simulation and modeling of graded bandgap CuInSe2/CdS based solar cells10.1109/16.485544 ↗
30. Back surface band gap gradings in Cu(In,Ga)Se2 solar cells10.1016/S0040-6090(00)01726-0 ↗
31. Band-gap grading in Cu(In,Ga)Se2 solar cells10.1016/j.jpcs.2005.09.087 ↗
32. Do built-in fields improve solar cell performance?10.1002/pip.851 ↗
33. Numerical study of Cu(In,Ga)Se2 solar cell performance toward 23% conversion efficiency
34. Optimum bandgap profile analysis of Cu(In,Ga)Se2 solar cells with various defect densities by SCAPS10.7567/JJAP.53.04ER14 ↗
35. Influence of Ga-notch position on recombination processes in Cu(In,Ga)Se2-based solar cells investigated by means of photoluminescence10.1016/j.tsf.2013.02.022 ↗
36. Optimizing ga-profiles for highly efficient Cu(In, Ga)Se2 thin film solar cells in simple and complex defect models10.1088/0022-3727/47/48/485104 ↗
37. CIGS absorber layer with double grading Ga profile for highly efficient solar cells10.1016/j.spmi.2016.02.036 ↗
38. Modelling polycrystalline semiconductor solar cells10.1016/S0040-6090(99)00825-1 ↗
39. Numerical modelling of AC-characteristics of CdTe and CIS solar cells
40. A. Niemegeers, S. Gillis, M. Burgelman, A user program for realistic simulation of polycrystalline heterojunction solar cells: SCAPS-1D, in: Proceedings of the 2nd World Conference on Photovoltaic Energy Conversion, JRC, European Commission, juli, 1998, pp. 672–675.
41. https://github.com/audreyazura/HitoriDenshi.
42. Relationship between bandgap grading and carrier recombination for Cu(In,Ga)Se2-based solar cells10.7567/JJAP.57.08RC08 ↗
43. Texture and morphology variations in (In,Ga)2Se3 and Cu(In,Ga)Se2 thin films grown with various Se source conditions10.1002/pip.1227 ↗
44. Study of gallium front grading at low deposition temperature on polyimide substrates and impacts on the solar cell properties10.1109/JPHOTOV.2018.2866195 ↗
45. Optimizing Ga-profiles for highly efficient Cu(In,Ga)Se2 thin film solar cells in simple and complex defect models10.1088/0022-3727/47/48/485104 ↗
46. Time-resolved microphotoluminescence study of Cu(In,Ga)Se2
47. Wavelength-dependent J–V characteristics of CuIn1−xGax(S,Se)2 solar cells and carrier recombination10.7567/1882-0786/ab1ad8 ↗