journal article·2020-10Open access

Investigation on limiting factors affecting Cu2ZnGeSe4 efficiency: Effect of annealing conditions and surface treatment

Nada Benhaddou, Safae Aazou, Yudania Sánchez, Jacob Andrade-Arvizu, Ignacio Becerril-Romero, Maxim Guc, Sergio Giraldo, Victor Izquierdo-Roca, Edgardo Saucedo, Zouheir Sekkat

Abstract

This work aims to unveil the optimal annealing conditions and surface treatments of CZGeSe absorbers, synthesized using vacuum-based deposition technique, with an eye to optimizing the main parameters allowing better control of secondary phases formation and improving crystalline quality of this absorber. Firstly, a comparative study is given of one and two-step annealing profiles, where, for each thermal treatment, the optimal temperature is probed. The second section of this study underlines the evaluation of the surface treatment effect on the as-annealed absorber using different etching agents. Finally, the effect of different post-annealing treatment temperatures on the overall performance of the fabricated devices is evaluated. For the studied optimizations, a deep understanding of the cell behavior is provided through structural, morphological and electrical characterizations. Preliminary results have given an efficiency up to 5.6% with higher Voc = 572 mV and FF = 65% compared to the reported record cell using similar absorber (Voc = 558 mV, FF = 59%). This performance is linked to the implementation of a two-step annealing process with lower temperatures (330 °C/480 °C) as it showed the best crystallinity-efficiency trade-off along with the smallest amount of ZnSe secondary phase among all the thermal routines studied. In addition, after the evaluation of several etching agents, the implementation of a KCN etching has shown to be the most effective leading to a remarkable improvement of the PN junction through a surface passivation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · ZnO doping and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (62)

Show source-provided references
1. High short-circuit current density in CIS solar cells by a simple two-step selenization process with a KF postdeposition treatment10.1109/JPHOTOV.2016.2636999 ↗
2. Effect of selenization processes on CIGS solar cell performance10.1166/jnn.2018.15279 ↗
3. The effects of annealing temperature on CIGS solar cells by sputtering from quaternary target with Se-free post annealing10.1016/j.apsusc.2017.03.289 ↗
4. Effects of sputtering voltage and current on the composition and microstructureof the CIGS films prepared by one-step pulsed DC magnetron sputtering10.1016/j.jallcom.2015.06.077 ↗
5. Crystallization phase transition in the precursors of CIGS films by Ar-ion plasma etching process10.1016/j.vacuum.2013.04.012 ↗
6. The roles of carrier concentration and interface, bulk, and grain‐boundary recombination for 25% efficient CdTe solar cells10.1063/1.4984320 ↗
7. Recrystallization in CdTe/CdS10.1016/S0040-6090(99)00753-1 ↗
8. Reaction kinetics study of CdTe thin films during CdCl2 heat treatment10.1016/j.solmat.2011.03.044 ↗
9. Fabrication of CdS/CdTe-based thin film solar cells using an electrochemical technique10.3390/coatings4030380 ↗
10. Physics and chemistry of CdTe/CdS thin film heterojunction photovoltaic devices: fundamental and critical aspects10.1039/C3EE41981A ↗
11. Novel, facile back surface treatment for CdTe solar cells
12. Effects of residual copper selenide on cuingase2 solar cells10.1016/j.sse.2010.11.019 ↗
13. Highly efficient copper-rich chalcopyrite solar cells from DMF molecular solution
14. Effects of ammonia-induced surface modification of Cu(In,Ga)Se2 on high-efficiency Zn(O,S)-Based Cu(In,Ga)Se2 solar cells
15. Cu2ZnSnS4 thin film solar cells grown by fast thermal evaporation and thermal treatment10.1016/j.solener.2016.11.035 ↗
16. The path towards a high-performance solution-processed kesterite solar cell10.1016/j.solmat.2010.11.028 ↗
17. Pareek
18. Kim
19. The current status and future prospects of kesterite solar cells : a brief review10.1002/pip.2741 ↗
20. Effects of heavy alkali elements in Cu(In , Ga )Se2 solar cells with efficiencies up to 22.6 %10.1002/pssr.201600199 ↗
21. Optoelectronic properties of thin film Cu2ZnGeSe4 solar cells10.1016/j.solmat.2017.06.050 ↗
22. Cation substitution in earth-abundant kesterite photovoltaic materials
23. Theoretical insights into kesterite and stannite phases of Cu2(Sn1-X GeX) ZnSe4 based alloys: a prospective photovoltaic material10.1063/1.4971323 ↗
24. Fairbrother · 2014 · 479
25. Fabrication of pulsed laser deposited Ge doped CZTSSe thin film based solar cells: influence of selenization treatment10.1016/j.solmat.2016.12.016 ↗
26. Physical characterization of Cu2ZnGeSe4 thin films from annealing of Cu-Zn-Ge precursor layers
27. The band gap of Cu2ZnSnSe4: effect of order-disorder10.1063/1.4896315 ↗
28. In-depth resolved Raman scattering analysis for the identification of secondary phases: characterization of Cu2ZnSnS4 layers for solar cell applications”10.1063/1.3587614 ↗
29. Crystal and electronic band structure of Cu2 ZnSnX4 „ X = S and Se … photovoltaic absorbers: first-principles insights
30. KCN chemical etch for interface engineering in Cu2ZnSnSe4 solar cells10.1021/acsami.5b02122 ↗
31. Influence of secondary phases in kesterite-Cu2ZnSnS4 absorber material based on the first principles calculation10.1155/2015/592079 ↗
32. Development of a selective chemical etch to improve the conversion efficiency of Zn-rich Cu2ZnSnS4 solar cells10.1021/ja301373e ↗
33. Formation and impact of secondary phases in Cu-poor Zn-rich Cu2ZnSn (S1− y Sey) 4 (0≤ y≤ 1) based solar cells10.1016/j.solmat.2015.04.023 ↗
34. ZnSe etching of Zn-rich Cu2ZnSnSe4: an oxidation route for improved solar-cell efficiency10.1002/chem.201302589 ↗
35. Effects of the surface Cu2−xSe phase on the growth and properties of CuInSe2 films10.1063/1.123639 ↗
36. Neuschitzer
37. Classification of lattice defects in the kesterite Cu2ZnSnS4 and Cu2ZnSnSe4 earth-abundant solar cell absorbers
38. Uncovering details behind the formation mechanisms of Cu2ZnGeSe4 photovoltaic absorbers10.1039/C9TC06728K ↗
39. Device characteristics of CZTSSe thin-film solar cells with 12.6% efficiency
40. Improvement of voltage deficit of Ge-incorporated kesterite solar cell with 12.3% conversion efficiency
41. Band gap tuning of Cu2ZnGeSxSe4-x absorbers for thin-film solar cells10.3390/en10111813 ↗
42. Urbach energy and the tails of the density10.1007/s10812-011-9450-9 ↗
43. On the origin of band-tails in kesterite
44. CZTS solar cells and the possibility of increasing VOC using evaporated Al2O3 at the CZTS/CdS interface10.1016/j.solener.2020.02.009 ↗
45. Very small tail state formation in Cu2ZnGeSe410.1063/1.5031799 ↗
46. Impact of Na dynamics at the Cu2ZnSn(S,Se)4/CdS interface during post low temperature treatment of absorbers10.1021/acsami.5b12243 ↗
47. Ordering kesterite improves solar cells: a low temperature post-deposition annealing study10.1016/j.solmat.2016.02.014 ↗
48. Impact of annealing treatment before buffer layer deposition on Cu2ZnSn(S,Se)4 solar cells10.1016/j.tsf.2014.11.016 ↗
49. History of accelerated and qualification testing10.1002/pip.861 ↗
50. Cu2ZnSnS4 solar cells with over 10% power conversion efficiency enabled by heterojunction heat treatment10.1038/s41560-018-0206-0 ↗
51. The complex surface chemistry of kesterites : Cu/Zn re-ordering after low temperature post deposition annealing and its role in high performance devices
52. Optimization of post-deposition annealing in Cu2ZnSnS4 thin film solar cells and its impact on device performance10.1016/j.solmat.2017.05.065 ↗
53. Quantitative determination of optical and recombination losses in thin-film photovoltaic devices based on external quantum efficiency analysis10.1063/1.4960698 ↗
54. Determination of deep-level defects in Cu2ZnSn(S,Se)4 thin-films using photocapacitance method10.1063/1.4922810 ↗
55. Spectral responses in quantum efficiency of emerging kesterite thin-film solar cells10.5772/68058 ↗
56. Improved quantum efficiency models of CZTSe: Ge nanolayer solar cells with a linear electric field10.1039/C7NR08824H ↗
57. Variation of quantum efficiency in CZTSSe solar cells with temperature and bias dependence by SCAPS simulation
58. Generalized quantum efficiency analysis for non-ideal solar cells: case of Cu2ZnSnSe410.1063/1.4939487 ↗
59. Cu2ZnSnS4 photovoltaic cell with improved efficiency fabricated by high-temperature annealing after CdS buffer-layer deposition10.1002/pip.2837 ↗
60. Solution-Processed one-dimensional ZnO@CdS heterojunction toward efficient Cu2ZnSnS4 solar cell with inverted structure
61. Thermal effect on CZTS solar cells in different process of ZnO/ITO window layer fabrication
62. Status of materials and device modelling for kesterite solar cells