journal article·2019-10

The anomalous behaviour of aliphatic fatty diamides: Chain length and hydrogen bonding interactions

Kosheela D. Poopalam, Latchmi Raghunanan, Laziz Bouzidi, S.K. Yeong, Suresh S. Narine

Publisher page

Abstract

A series of five linear aliphatic diamides were synthesised via facile direct coupling of stearic acid (C18) with diamines of varying carbon number (18- n-18, n = 2, 4, 6, 8 and 10) in a catalyst-free neat reaction. The compounds were investigated as potential renewable phase change materials (PCMs) for latent heat thermal energy storage. The thermal properties of the diamides were predictably related to the diamine chain length. TGA measurements indicated that the diamides evaporated before decomposition, with evaporation onsets increasing from 325 °C for 18- 2 -18 to plateau at 337 °C for the longer-chain diamides. The diamides display negligible supercooling and melt and crystallize at 140 °C–150 °C within a narrow transition span (<5 °C). Notably, both their melting and crystallization temperatures versus n present a maximum at n = 4, explained by peak hydrogen bonding and chain length considerations. As the distance between the amide groups increases, the transition temperatures decrease exponentially owing to the subsequent decrease in intermolecular hydrogen bond strength. The latent heat of the diamides presented a sharp increase from 165 J/g for 18- 2-18 to plateau at ~210 J/g for the other amides ( n ≥ 4). XRD measurements support the thermal transition behaviour; it shows that all the diamides crystallize from the melt into the β-phase, except for 18- 2 -18 in which the β-phase co-existed with the less stable β′-phase. Overall, the study shows that the diamides are suitable alternatives to classical petrochemical derived PCMs, expanding the currently limited library of organic PCMs.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Phase Change Materials Research · Adsorption and Cooling Systems · Polymer composites and self-healing

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (67)

Show source-provided references
1. Melting point and molecular symmetry10.1021/ed077p724 ↗
2. Pumped hydro energy storage system: a technological review10.1016/j.rser.2014.12.040 ↗
3. Thermophysical properties of some organic phase change materials for latent heat storage10.1016/j.solener.2014.05.001 ↗
4. Phase change materials for thermal energy storage10.1016/j.pmatsci.2014.03.005 ↗
5. Review on thermal energy storage with phase change materials and applications10.1016/j.rser.2007.10.005 ↗
6. Thermoplastic polyester amides derived from oleic acid10.1016/j.polymer.2011.08.002 ↗
7. Thermal behaviour of some dicarboxylic acids and their monoamide derivatives10.1016/S0040-6031(99)00195-1 ↗
8. Thermophysical and heat transfer properties of phase change material candidate for waste heat transportation system10.1007/s00231-007-0311-2 ↗
9. A review on current status and challenges of inorganic phase change materials for thermal energy storage systems10.1016/j.rser.2016.12.012 ↗
10. Latent heat characteristics of biobased oleochemical carbonates as potential phase change materials10.1016/j.solmat.2010.05.031 ↗
11. Materials used as PCM in thermal energy storage in buildings: a review10.1016/j.rser.2010.11.018 ↗
12. Salt hydrates as latent heat storage materials:Thermophysical properties and costs10.1016/j.solmat.2015.10.029 ↗
13. Saturated linear diesters from stearic acid as renewable phase change materials10.1016/j.matlet.2014.09.041 ↗
14. Stewart · 2011
15. Investigation of unbranched, saturated, carboxylic esters as phase change materials10.1016/j.renene.2017.02.056 ↗
16. The use of lipids as phase change materials for thermal energy storage10.1002/lite.201400037 ↗
17. Thermal energy storage for low and medium temperature applications using phase change materials–a review10.1016/j.apenergy.2016.05.097 ↗
18. Fatty acids as phase change materials: a review10.1016/j.rser.2013.08.107 ↗
19. Crystallization and melting behavior of erythritol in and around two-dimensional hexagonal mesoporous silica10.1021/jp510048g ↗
20. Thermal stability test of sugar alcohols as phase change materials for medium temperature energy storage application10.1016/j.egypro.2014.02.051 ↗
21. Heat capacities of some sugar alcohols as phase change materials for thermal energy storage applications10.1016/j.jct.2017.08.004 ↗
22. Characterization of different sugar alcohols as phase change materials for thermal energy storage applications10.1016/j.solmat.2016.10.009 ↗
23. Fatty acids as phase change materials (PCMs) for thermal energy storage: a review10.1081/GE-200038722 ↗
24. Odd–even effect in melting properties of 12 alkane-α,ω-diamides10.1016/j.jct.2006.04.004 ↗
25. Hexamethylene dilauroyl, dimyristoyl, and dipalmytoyl amides as phase change materials for thermal energy storage10.1016/j.solener.2010.01.016 ↗
26. Synthesis and thermal energy storage properties of ethylene dilauroyl, dimyristoyl, and dipalmitoyl amides as novel solid–liquid phase change materials10.1016/j.solmat.2011.01.018 ↗
27. Latent heat storage using renewable saturated diesters as phase change materials10.1016/j.energy.2016.09.085 ↗
28. Thermal stability of renewable diesters as phase change materials10.1016/j.tca.2016.10.009 ↗
29. Influence of structure on chemical and thermal stability of aliphatic diesters10.1021/jp409062k ↗
30. A study on thermal characteristics of phase change material (PCM) in gypsum board for building application
31. Phase change material selection for thermal processes working under partial load operating conditions in the temperature range between 120 and 200 °C10.3390/app7070722 ↗
32. Low mass fraction impregnation with graphene oxide (GO) enhances thermo-physical properties of paraffin for heat storage applications10.1016/j.tca.2017.07.005 ↗
33. Carnelley's rule and the prediction of melting point10.1002/jps.24034 ↗
34. The prediction of heat storage properties by the study of structural effect on organic phase change materials10.1016/j.egypro.2014.01.186 ↗
35. Latent heat storage above 120°C for applications in the industrial process heat sector and solar power generation10.1002/er.1346 ↗
36. Long-chain aliphatic polymers to bridge the gap between semicrystalline polyolefins and traditional polycondensates10.1021/acs.chemrev.5b00705 ↗
37. Exergy analysis of an adiabatic compressed air energy storage system using a cascade of phase change materials10.1016/j.energy.2016.03.042 ↗
38. Thermal energy storage technologies and systems for concentrating solar power plants10.1016/j.pecs.2013.02.001 ↗
39. Recent developments in phase change materials for energy storage applications: a review10.1016/j.ijheatmasstransfer.2018.09.126 ↗
40. Short-term storage systems of thermal energy for buildings: a review10.1080/17512549.2013.809271 ↗
41. Phase change materials for thermal energy storage10.1016/j.pmatsci.2014.03.005 ↗
42. Solar cooker of the portable parabolic type incorporating heat storage based on PCM10.1016/j.apenergy.2013.01.083 ↗
43. A simple preparation of amides from acids and amines by heating of their mixture10.1080/00397919308013807 ↗
44. Molecular assembly and gelating behavior of didodecanoylamides of α,ω-alkylidenediamines10.1021/ja0169318 ↗
45. Indifference to hydrogen bonding in a family of secondary amides10.1021/ja9711019 ↗
46. Difference between 1H NMR signals of primary amide protons as a simple spectral index of the amide intramolecular hydrogen bond strength10.1002/poc.1910 ↗
47. Nuclear magnetic resonance studies of amides10.1021/cr60267a001 ↗
48. Engineering green lubricants I: optimizing thermal and flow properties of linear diesters derived from vegetable oils10.1021/acssuschemeng.5b01644 ↗
49. Conformational characteristics and configurational properties of poly(ethylene succinate) and poly(butylene succinate) and structure–property–function relationships of representative biodegradable polyesters10.1016/j.polymer.2014.11.003 ↗
50. Crystallization behaviour of fats and lipids — a review10.1016/S0009-2509(00)00458-9 ↗
51. Lipid shortenings: a review10.1016/S0963-9969(02)00163-1 ↗
52. Classification of glyceride crystal forms10.3891/acta.chem.scand.20-2255 ↗
53. Marangoni · 2004
54. Thermodynamic and kinetic aspects of fat crystallization10.1016/j.cis.2006.06.016 ↗
55. Lubricating and waxy esters, I. Synthesis, crystallization, and melt behavior of linear monoesters10.1016/j.chemphyslip.2011.11.003 ↗
56. Self-organization of physisorbed secondary alcohol molecules on a graphite surface10.1016/S0039-6028(99)01106-1 ↗
57. High-chain fatty acid esters of myristyl alcohol with odd carbon number: novel organic phase change materials for thermal energy storage—210.1016/j.solmat.2011.04.018 ↗
58. High-chain fatty acid esters of 1-hexadecanol for low temperature thermal energy storage with phase change materials10.1016/j.solmat.2011.09.013 ↗
59. The melting point Alternation in α,ω-alkanedicarboxylic acids10.1021/ja0011459 ↗
60. Melting behaviour of a series of monoamides10.1016/0040-6031(80)85002-7 ↗
61. Estimation of melting points of organics10.1016/j.xphs.2017.12.013 ↗
62. An improved method to measure the rate of vaporisation and thermal decomposition of high boiling organic and ionic liquids by thermogravimetrical analysis10.1039/c0cp00097c ↗
63. Review on the methodology used in thermal stability characterization of phase change materials10.1016/j.rser.2015.04.187 ↗
64. Experimental evaluation of a paraffin as phase change material for thermal energy storage in laboratory equipment and in a shell-and-tube heat exchanger10.3390/app6040112 ↗
65. Intramolecular hydrogen bonding in simple diamides10.1016/S0040-4039(00)99250-5 ↗
66. Thermal stability of phase change materials used in latent heat energy storage systems: a review10.1016/j.rser.2012.10.022 ↗
67. Diesters of high-chain dicarboxylic acids with 1-tetradecanol as novel organic phase change materials for thermal energy storage10.1016/j.solmat.2012.04.030 ↗