High-temperature air-stable solar absorbing coatings based on the cermet of MoSi2 embedded in SiO2
Source abstract
Abstract
Abstract Solar absorbing coating is a critical component in concentrated solar power (CSP) system. How to further decrease costs and enhance thermal stability of coatings is crucial for large-scaled CSP systems. Herein, we present a cost-effective and facile strategy to prepare the MoSi2–SiO2 based coatings, which can survive at 850 °C in air for 100 h due to the formation of a SiO2 barrier in cermet that prevents the coatings from further oxidation. The absorbers demonstrate a high absorptance of ∼95%, and the total efficiency using this absorber could reach 63.5% with the conditions of a solar concentration ratio of C = 1000 at 850 °C, which exceeds most of spectrally selective coatings. These results suggest that the MoSi2–SiO2 based absorbing coating would be a potential candidate for a large-scale deployment in high-temperature solar thermal conversion systems.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Solar Thermal and Photovoltaic Systems · Solar-Powered Water Purification Methods · Phase Change Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. Kennedy · 2002
2. A review of cermet-based spectrally selective solar absorbers10.1039/c3ee43825b ↗
3. Concentrating solar power10.1021/acs.chemrev.5b00397 ↗
4. Enhanced thermal stability of W-Ni-Al2O3 cermet-based spectrally selective solar absorbers with tungsten infrared reflectors10.1002/aenm.201401042 ↗
5. A high-temperature stable spectrally-selective solar absorber based on cermet of titanium nitride in SiO2 deposited on lanthanum aluminate10.1016/j.solmat.2016.10.012 ↗
6. Optical and structural analysis of solar selective absorbing coatings based on AlSiOx:W cermets10.1016/j.solener.2017.04.055 ↗
7. High performance Al–AlN solar spectrally selective coatings with a self-assembled nanostructure AlN anti-reflective layer10.1039/C6TA09460K ↗
8. Thermal aging characteristics of CrNxOy solar selective absorber coating for flat plate solar thermal collector applications10.1016/j.solmat.2013.03.005 ↗
9. High-temperature tolerance in WTi-Al2O3 cermet-based solar selective absorbing coatings with low thermal emissivity10.1016/j.nanoen.2017.05.036 ↗
10. Enhanced Spectral Selectivity through the Quasi-Optical Microcavity Based on W-SiO2 Cermet10.1016/j.mtphys.2019.03.003 ↗
11. The investigation of thermal stability of Al/NbMoN/NbMoON/SiO2 solar selective absorbing coating10.1016/j.solmat.2017.06.056 ↗
12. Energy-saving spectrally-selective coatings based on MoO3/Ag thin films10.1016/j.matdes.2015.02.025 ↗
13. Growth and characterization of spectrally selective Cr2O3/Cr/Cr2O3 multilayered solar absorber by e-beam evaporation10.1016/j.jallcom.2017.11.036 ↗
14. Heavy ion elastic recoil detection analysis of AlxOy/Pt/AlxOy multilayer selective solar absorber10.1016/j.apsusc.2014.01.156 ↗
15. Optical properties and thermal stability of solar selective absorbers based on Co-Al2O3 cermets10.1016/j.cjph.2017.02.015 ↗
16. MoSi2–Si3N4 absorber for high temperature solar selective coating10.1016/j.solmat.2016.04.001 ↗
17. Preparation and spectral properties of solar selective absorbing MoSi2-Al2O3 coating10.1002/pssa.201330658 ↗
18. Aqueous solution-derived CuMn2O4 ceramic films for spectrally selective solar absorbers10.1016/j.ceramint.2016.09.062 ↗
19. Aqueous solution-chemical derived Ni–Al2O3 solar selective absorbing coatings10.1016/j.solmat.2012.05.030 ↗
20. High-performance solution-processed plasmonic Ni nanochain-Al2O3 selective solar thermal absorbers10.1063/1.4766730 ↗
21. Aqueous solution-chemical derived spinel Cu1.5Mn1.5O4 thin film for solar absorber application10.1016/j.matlet.2016.05.090 ↗
22. Black oxide nanoparticles as durable solar absorbing material for high-temperature concentrating solar power system10.1016/j.solmat.2014.12.004 ↗
23. Design and optimization of nanoparticle-pigmented solar selective absorber coatings for high-temperature concentrating solar thermal systems
24. Synthesis of Mosi2 powder by mechanical alloying10.1016/0921-5093(94)03274-2 ↗
25. Synthesis and formation mechanisms of molybdenum silicides by mechanical alloying10.1016/S0921-5093(96)10430-5 ↗
26. Infrared reflectance measurement of ion implanted silica
27. The optical constants of quartz, vitreous silica and neutron-irradiated vitreous silica: (II) Analysis of the infrared spectrum of vitreous silica10.1016/0022-3093(76)90131-9 ↗
28. High-pressure infrared-spectra of silica glass and quartz10.1016/S0022-3093(87)80294-6 ↗
29. Characterization of Pyromark 2500 paint for high-temperature solar receivers
30. Characterization of Pyromark 2500 for high-temperature solar receivers
31. Structural investigation of gel-derived materials from the SiO2 -Al2O3 system10.1016/j.molstruc.2018.04.085 ↗
32. Structural examinations of gel-derived materials of the CaO–P2O5–SiO2 system10.1016/S0022-2860(99)00163-5 ↗
33. Structural and chemical investigation of the gel-derived bioactive materials from the SiO2–CaO and SiO2-CaO-P2O5 systems10.1016/j.ceramint.2017.06.160 ↗
34. Effects of calcination on silica phase transition in diatomite10.1016/j.jallcom.2018.05.010 ↗
35. Infrared spectra of trifiuoroacetic acid and trifluoroacetic anhydride10.1016/0584-8539(71)80143-5 ↗
36. The first experimental observation of the higher-energy trans conformer of trifluoroacetic acid10.1016/j.molstruc.2016.06.077 ↗
37. Zn(II), Pb(II), and Cd(II) adsorption from aqueous solution by magnetic silica gel: preparation, characterization, and adsorption10.1007/s11356-018-3050-7 ↗
38. Corrosion inhibition performance and healing ability of a hybrid silane coating in the presence of praseodymium (III) cations10.1149/2.0841811jes ↗
39. The effect of high temperature sol-gel polymerization parameters on the microstructure and properties of hydrophobic phenol-formaldehyde/silica hybrid aerogels10.1016/j.jcis.2017.01.014 ↗
40. Robust and anti-corrosive PDMS/SiO2 superhydrophobic coatings fabricated on magnesium alloys with different-sized SiO2 nanoparticles10.1016/j.apsusc.2018.06.250 ↗
41. Water retention of calcium-containing pectin studied by quartz crystal microbalance and infrared spectroscopy with a humidity control system10.1021/acs.jafc.8b02413 ↗
42. The role of surface deformation in the oxidation response of type 304 SS in high temperature deaerated water10.1016/j.corsci.2018.06.033 ↗
43. The oxidation behaviour of 304 stainless steel in oxygenated high temperature water10.1016/j.corsci.2010.09.001 ↗
44. Effects of grit blasting and annealing on the high-temperature oxidation behavior of austenitic and ferritic Fe-Cr alloys10.1007/s11665-014-1073-x ↗
45. Nitrogen-induced selective high-temperature internal oxidation behavior in duplex stainless steels 19Cr–10Mn–0.3Ni– xN10.1016/j.corsci.2015.06.013 ↗
46. Visible photoluminescence from the annealed TEOS SiO210.1016/j.mseb.2005.11.020 ↗
47. Raman spectroscopy of polycrystalline molybdenum silicide thin films
48. Raman spectroscopic study of the formation of t‐MoSi2 from Mo/Si multilayers10.1116/1.579351 ↗
49. Phase formation during reactive molybdenum-silicide formation10.1557/JMR.1990.2854 ↗
50. Crystalline silicon films sputtered on molybdenum10.1016/S0169-4332(03)00148-X ↗