The use of HfO2 in a point contact concept for front interface passivation of Cu(In,Ga)Se2 solar cells
Source abstract
Abstract
We report on the use of a high bandgap metal-oxide at the front interface of Cu(In,Ga)Se2 (CIGS) solar cells in a point contact concept for reduced interface recombination. Highly resistive HfO2 is applied on the CIGS surface by atomic layer deposition (ALD). Aspects of the surface passivating effect of HfO2 on CIGS were investigated by time-resolved photoluminescence (TRPL), electron beam induced current (EBIC) and capacitance-voltage (C-V) measurements. Two structuring methods for point contact formation are compared, a lithographic top-down and a simple bottom-up approach using NaCl as template. The former method employed a plasma etch step which was found to degrade the performance of solar cells when applied on the CIGS surface. The template method omitted sputtering and allowed patterning of HfO2 up to 10 nm thickness without adversely impacting the open-circuit voltage (VOC). EBIC revealed an improved carrier collection due to the HfO2 coating and a long term stable PL decay was observed. Yet, the point contact concept with HfO2 was not significantly influencing the performance of a CIGS solar cell for the investigated parameter range.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. Potassium-induced surface modification of Cu(In,Ga)Se-2 thin films for high-efficiency solar cells10.1038/nmat3789 ↗
2. Effects of heavy alkali elementsin Cu(In,Ga)Se-2 solar cells with efficiencies up to 22.6%10.1002/pssr.201600199 ↗
3. Buffer layers and transparent conducting oxides for chalcopyrite Cu(In,Ga)(S,Se)(2) based thin film photovoltaics: present status and current developments10.1002/pip.955 ↗
4. Surface passivation of high-efficiency silicon solar cells by atomic-layer-deposited Al2O310.1002/pip.823 ↗
5. Electrical characterization of ALD Al2O3-HfO2 and PECVD Al2O3 passivation layers for p-type CZ-Silicon PERC solar cells
6. On the control of the fixed charge densities in Al2O3-based silicon surface passivation schemes10.1021/acsami.5b06606 ↗
7. Effect of different Na supply methods on thin Cu(In,Ga)Se-2 solar cells with Al2O3 rear passivation layers10.1016/j.solmat.2018.07.017 ↗
8. Rear contact passivation for high bandgap Cu(in,Ga)Se-2 solar cells with a flat Ga profile
9. Highly reflective rear surface passivation design for ultra-thin Cu(In,Ga) Se-2 solar cells10.1016/j.tsf.2014.10.050 ↗
10. Passivation of interfaces in thin film solar cells: understanding the effects of a nanostructured rear point contact layer
11. Lithographic fabrication of point contact with Al2O3 rear-surface-passivated and ultra-thin Cu(In,Ga)Se-2 solar cells10.1016/j.tsf.2018.08.044 ↗
12. Addressing the impact of rear surface passivation mechanisms on ultra-thin Cu(In,Ga)Se-2 solar cell performances using SCAPS 1-D model10.1016/j.solener.2017.08.055 ↗
13. Surface passivation of CIGS solar cells using gallium oxide
14. Impact of front-side point contact/passivation geometry on thin-film solar cell performance10.1016/j.solmat.2017.02.031 ↗
15. Buffer layer point contacts for CIGS solar cells using nanosphere lithography and atomic layer deposition10.1109/JPHOTOV.2016.2627621 ↗
16. Improved rear surface passivation of Cu(in,Ga)Se-2 solar cells: a combination of an Al2O3 rear surface passivation layer and nanosized local rear point contacts10.1109/JPHOTOV.2013.2287769 ↗
17. Optical characterization of HfO2 thin films grown by atomic layer deposition10.1016/j.tsf.2004.01.110 ↗
18. Highly efficient Cu(In,Ga)Se-2 solar cells grown on flexible polymer films10.1038/nmat3122 ↗
19. Unveiling the effects of post-deposition treatment with different alkaline elements on the electronic properties of CIGS thin film solar cells10.1039/c4cp00614c ↗
20. Cd and impurity redistribution at the CdS/CIGS interface after annealing of CIGS-based solar cells resolved by atom probe tomography10.1109/JPHOTOV.2016.2629841 ↗
21. Surface passivation for reliable measurement of bulk electronic properties of heterojunction devices10.1002/smll.201601575 ↗
22. Time-resolved photoluminescence on double graded Cu(In,Ga)Se2 – impact of front surface recombination and its temperature dependence10.1080/14686996.2019.1586583 ↗
23. TiO2 as intermediate buffer layer in Cu(In,Ga)Se-2 solar cells10.1016/j.solmat.2017.09.030 ↗
24. ALD-Zn xTi yO as window layer in Cu(in,Ga)Se2 solar cells10.1021/acsami.8b14490 ↗