Analysis of nanosecond and femtosecond laser ablation of rear dielectrics of silicon wafer solar cells
Source abstract
Abstract
Abstract Laser ablation of rear dielectrics of PERC (Passivated Emitter and Rear Cell) type silicon solar cells is by far the most cost-effective method to open a variety of patterns for local contact formation. In this paper, rear dielectric ablation of p-type PERC solar cells with an implanted phosphorus emitter is investigated using two laser sources with green wavelength and with pulse durations in the nanosecond (ns) and femtosecond (fs) range. The ns laser source emits 38 ns pulses and the ablation behaviour is linear for the entire range of available pulse fluences. The fs laser source emits 480 fs pulses and has two operating regimes, gentle and strong, based on the incoming pulse fluence. To evaluate the impact of laser induced damages on PERC solar cells, four different laser conditions are considered: fs gentle regime, fs strong regime, ns low fluence and ns high fluence. The solar cells’ one-sun I–V parameters show that the cells processed in the fs strong regime have a severe reduction in the open-circuit voltage by almost 40 mV, fill factor loss by ~7% and efficiency loss by 3–4%. Fill factor loss analysis shows that a loss of almost 7% absolute comes entirely from J02 recombination, revealing a possibility of severe damage to the front side emitter. The solar cells processed with the other three laser conditions have comparable I–V characteristics. SEM analysis of the front surface of samples with laser treated rear surface shows that the fs strong regime produces severe damage to the front-surface texture resulting in lower Jsc, whereas this effect is not observed for the other laser conditions.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Laser Material Processing Techniques · Integrated Circuits and Semiconductor Failure Analysis · Ocular and Laser Science Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. M. Fischer, International Technology Roadmap for Photovoltaic 9th Edition [Report], 2018. Available: 〈http://www.itrpv.net/Reports/Downloads/〉.
2. 22.8% efficient silicon solar cell10.1063/1.101596 ↗
3. Model Based Continuous Improvement of Industrial p-type PERC Technology Beyond 21% Efficiency10.1016/j.egypro.2015.07.073 ↗
4. M. Osborne, Trina Solar starts PERC technology volume production, 2015. Available: 〈https://www.pv-tech.org/news/trina_solar_starts_perc_technology_volume_production〉.
5. Comparative investigation of solar cell thin film processing using nanosecond and femtosecond lasers10.1088/0022-3727/39/3/005 ↗
6. Femtosecond laser drilling of crystalline and multicrystalline silicon for advanced solar cell fabrication10.1007/s00339-012-6932-4 ↗
7. Femtosecond laser ablation: fundamentals and applications
8. Femtosecond laser micromachining in transparent materials10.1038/nphoton.2008.47 ↗
9. A review of ultrashort pulsed laser ablation of materials10.2351/1.521827 ↗
10. Laser ablation of SiO2 for locally contacted Si solar cells with ultra-short pulses10.1002/pip.758 ↗
11. Femtosecond laser ablation of dielectric layers for high-efficiency silicon wafer solar cells10.1016/j.solener.2018.02.046 ↗
12. Laser-induced shockwave propagation from ablation in a cavity10.1063/1.2172738 ↗
13. Enhancing the expansion of a plasma shockwave by crater-induced laser refocusing in femtosecond laser ablation of fused silica10.1364/PRJ.5.000488 ↗
14. Ultrafast laser nanostructuring in bulk silica, a “slow” microexplosion10.1364/OPTICA.4.000951 ↗
15. Simple technique for measurements of pulsed Gaussian-beam spot sizes10.1364/OL.7.000196 ↗
16. Enhancement of laser-induced rear surface spallation by pyramid textured structures on silicon wafer solar cells10.1364/OE.20.00A984 ↗
17. A fill factor loss analysis method for silicon wafer solar cells10.1109/JPHOTOV.2013.2270348 ↗
18. A new method for accurate measurements of the lumped series resistance of solar cells10.1109/PVSC.1993.347065 ↗
19. A systematic loss analysis method for rear-passivated silicon solar cells10.1109/JPHOTOV.2014.2388071 ↗
20. Ablation thresholds in ultrafast laser micromachining of common metals in air10.1117/12.463744 ↗
21. M. Boustie, L. Berthe, T. De Rességuier, M. Arrigoni, Laser shock waves: fundamentals and applications, in: Proceedings of the 1st International Symposium on Laser Ultrasonics: Science, Technology and Applications, 2008, pp. 1–6.
22. Laser‐generated stress waves10.1063/1.1653116 ↗
23. Increased front surface recombination by rear-side laser processing on thin silicon solar cells10.1109/JPHOTOV.2013.2261573 ↗