Inkjet-printed CZTSSe absorbers and influence of sodium on device performance
Source abstract
Abstract
Abstract Inkjet printing is a promising route for thin film deposition due to its low material wastage and potential of high throughput production. In this work, the inkjet printing technique is used for the deposition of Cu2ZnSn(SxSe1−x)4 (CZTSSe) thin films from Cu-Zn-Sn-S molecular inks. The key step for using the inkjet printing technique is to formulate a stable ink with suitable viscosity. The ink was prepared by dissolving Cu, Sn, and Zn metal salt precursors, thiourea and different amount of NaF (varied from 0 M to 1.12 M) in dimethyl sulfoxide. NaF was added to verify the influence of sodium (Na) in ink formation and CZTSSe device properties. It was found from the kesterite structure analysis that increasing NaF leads to segregation of a NaCl phase in the resulting CZTSSe films. Cross-sectional morphologies of the kesterite layer as revealed by scanning electron microscopy showed an enhancement from a multi-layered sandwich type to a double-layered structure by adding NaF. The photoelectron conversion efficiencies of solar cells, with a glass/Mo/CZTSSe/CdS/ZnO/AZO/Ni-Al configuration, increased from 1.7% to 6.4% with increasing NaF concentration from 0 M to 0.144 M and thereafter decreasing at higher NaF concentration (≥ 0.288 M).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. The path towards a high-performance solution-processed kesterite solar cell10.1016/j.solmat.2010.11.028 ↗
2. Band-gap-graded Cu2ZnSn(S1-x,Se(x))4 solar cells fabricated by an ethanol-based, particulate precursor ink route10.1038/srep03069 ↗
3. Device characteristics of CZTSSe thin-film solar cells with 12.6% efficiency10.1002/aenm.201301465 ↗
4. One-step solution-based synthesis and characterization of kuramite Cu3SnS4 nanocrystals10.1039/c2ra21777e ↗
5. Correlation between processing conditions of Cu2ZnSn(SxSe1−x)4 and modulated surface photovoltage10.1063/1.4801463 ↗
6. Structural and optical properties of Cu2ZnSnS4 thin film absorbers from ZnS and Cu3SnS4 nanoparticle precursors10.1016/j.tsf.2012.10.034 ↗
7. Cu2ZnSn(S, Se)4 thin film absorbers based on ZnS, SnS and Cu3SnS4 nanoparticle inks: enhanced solar cells performance by using a two-step annealing process10.1016/j.solmat.2014.08.024 ↗
8. High-efficiency solution-processed Cu2ZnSn(S,Se)4 thin-film solar cells prepared from binary and ternary nanoparticles10.1021/ja3057985 ↗
9. 9.0% efficient Cu2ZnSn(S,Se)4solar cells from selenized nanoparticle inks10.1002/pip.2472 ↗
10. Fabrication of 7.2% efficient CZTSSe solar cells using CZTS nanocrystals10.1021/ja108427b ↗
11. Earth-abundant element photovoltaics directly from soluble precursors with high yield using a non-toxic solvent10.1002/aenm.201100140 ↗
12. Lithium-doping inverts the nanoscale electric field at the grain boundaries in Cu2ZnSn(S,Se)4 and increases photovoltaic efficiency10.1039/C5CP04707B ↗
13. Inkjet-printed Cu2ZnSn(S, Se)4solar cells10.1002/advs.201500028 ↗
14. Roll-to-roll inkjet printing and photonic sintering of electrodes for ITO free polymer solar cell modules and facile product integration10.1002/aenm.201200520 ↗
15. Inkjet printing of organic electronics – comparison of deposition techniques and state-of-the-art developments10.1039/c2tc00255h ↗
16. Sodium assisted sintering of chalcogenides and its application to solution processed Cu2ZnSn(S,Se)4thin film solar cells10.1021/cm403504u ↗
17. Effects of sodium incorporation in Co-evaporated Cu2ZnSnSe4 thin-film solar cells10.1063/1.4802972 ↗
18. Bifacial sodium-incorporated treatments: tailoring deep traps and enhancing carrier transport properties in Cu2ZnSnS4 solar cells10.1016/j.nanoen.2015.07.022 ↗
19. Sodium doping effects on the crystalline and electrical properties of Cu2ZnSnSe4 thin films10.1016/j.solener.2015.02.033 ↗
20. Alkali-metal-enhanced grain growth in Cu2ZnSnS4thin films10.1039/C3EE44130J ↗
21. Effect of sodium diffusion on the structural and electrical properties of Cu2ZnSnS4 thin films10.1016/j.solmat.2010.12.012 ↗
22. Effects of sodium on electrical properties in Cu2ZnSnS4 single crystal10.1063/1.4871208 ↗
23. The role of sodium as a surfactant and suppressor of non-radiative recombination at internal surfaces in Cu2ZnSnS410.1002/aenm.201400849 ↗
24. Rational defect passivation of Cu2ZnSn(S,Se)4 photovoltaics with solution-processed Cu2ZnSnS4:Na nanocrystals10.1021/ja407202u ↗
25. Alkali doping strategies for flexible and light-weight Cu2ZnSnSe4solar cells10.1039/C5TA09640E ↗
26. Sulfurization induced surface constitution and its correlation to the performance of solution-processed Cu2ZnSn(S,Se)4 solar cells10.1038/srep06288 ↗
27. Sodium distribution in solar-grade Cu2ZnSnS4layers using atom-probe tomographic technique10.7567/JJAP.54.112302 ↗
28. Effects of Na on the properties of Cu(In,Ga)S2 solar cells10.1016/j.tsf.2011.02.044 ↗
29. Influence of Na on the properties of Cu-rich prepared CuInS2 thin films and the performance of corresponding CuInS2 CdS ZnO solar cells.pdf
30. Surfactant-free hydrothermal synthesis of Cu2ZnSnS4 (CZTS) nanocrystals with photocatalytic properties10.1039/C4RA03444A ↗
31. XPS analysis and structural and morphological characterization of Cu2ZnSnS4 thin films grown by sequential evaporation10.1016/j.apsusc.2014.03.124 ↗
32. Post-deposition treatment of Cu 2 ZnSnSe 4 with alkalis10.1016/j.tsf.2016.11.021 ↗
33. Vacuum-free preparation of 7.5% efficient Cu2ZnSn(S,Se)4 solar cells based on metal salt precursors10.1016/j.solmat.2013.06.021 ↗
34. First-principles study on alkali-metal effect of Li, Na, and K in Cu2ZnSnS4and Cu2ZnSnSe410.1002/pssc.201400345 ↗
35. Insights into Intrinsic defects and the incorporation of Na and K in the Cu2ZnSnSe4thin-film solar cell material from hybrid-functional calculations10.1021/acs.jpcc.5b11022 ↗
36. The impact of sodium on the sub-bandgap states in CZTSe and CZTS10.1063/1.4916635 ↗