Potential of quasi-inverted pyramid with both efficient light trapping and sufficient wettability for ultrathin c -Si/PEDOT:PSS hybrid solar cells
Source abstract
Abstract
Abstract In this paper, a simple and cost-effective wet chemical method is presented to form quasi-inverted pyramids (QIP) on ultrathin c -Si for efficient light trapping and sufficient wettability. The QIP is fabricated by a well-known two-step Ag assisted chemical etching method followed by a post nanostructure rebuilding (NSR) process. The variation of [Ag + ] realizes the modulation of QIP size from sub-micro scale to micro scale. The comparable average absorptance value of 50 µm c -Si with double-sided QIP fabricated under 0.5 mM [Ag + ] (QIP-50) to that of 182 µm c -Si with double-sided conventional micro-scale pyramid in the spectral range of 300 – 1100 nm demonstrates an over 3.6-fold reduction in material usage. In comparison with nanopores-structured light-trapping configuration, the QIP-50 possesses much smaller specific surface area of ~2.39, which alleviates the surface recombination losses. After wet oxidation treatment, the water contact angle (WCA) of QIP-50 (35.73°) can achieve a comparable value to that of wet oxidized polished wafer (33.30°), demonstrating sufficient wettability of the QIP for high efficiency ultrathin c -Si/PEDOT:PSS hybrid solar cells. The finding of QIP with both efficient light trapping and superior wettability provides a new opportunity to improve the performance of ultrathin c -Si/PEDOT:PSS hybrid solar cells with a simple process at low cost.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Nanowire Synthesis and Applications · Thin-Film Transistor Technologies · Silicon and Solar Cell Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. E. Vartiainen, G. Masson, C.P.V. Breyer, LCOE inEurope 2014–2030, 2015.
2. The International Renewable Energy Agency: a success story in institutional innovation?10.1007/s10784-013-9226-1 ↗
3. A 12%-efficient upgraded metallurgical grade silicon-organic heterojunction solar cell achieved by a self-purifying process10.1021/nn504279d ↗
4. Effects of phosphorus diffusion gettering on minority carrier lifetimes of single-crystalline, multi-crystalline and UMG silicon wafer10.1016/j.cap.2013.09.013 ↗
5. S.J. Fonash, Solar Cell Device Physics (Second dition), 2010.
6. Light trapping properties of pyramidally textured surfaces10.1063/1.339189 ↗
7. Manipulating the antireflective properties of vertically-aligned silicon nanowires10.1016/j.solmat.2014.08.004 ↗
8. Optimal design for antireflective Si nanowire solar cells10.1016/j.solmat.2012.12.046 ↗
9. Low-pressure assisted coating method to improve interface between PEDOT:PSS and silicon nanotips for high efficiency organic/inorganic hybrid solar cells via solution process
10. Anti-reflection layers fabricated by a one-step copper-assisted chemical etching with inverted pyramidal structures intermediate between texturing and nanopore-type black silicon10.1039/C4TA02006E ↗
11. Efficient light trapping in low aspect-ratio honeycomb nanobowl surface texturing for crystalline silicon solar cell applications10.1063/1.4851236 ↗
12. Inverted nanopyramid texturing for silicon solar cells using interference lithography10.1016/j.mee.2014.04.004 ↗
13. Surface texturing of single-crystalline silicon solar cells using low density SiO2 films as an anisotropic etch mask10.1016/j.solmat.2010.06.026 ↗
14. 24.5% efficiency silicon PERT cells on MCZ substrates and 24.7% efficiency PERL cells on FZ substrates10.1002/(SICI)1099-159X(199911/12)7:6<471::AID-PIP298>3.0.CO;2-7 ↗
15. Absorption enhancement in ultrathin crystalline silicon solar cells with antireflection and light-trapping nanocone gratings10.1021/nl204550q ↗
16. Femtosecond laser direct hard mask writing for selective facile micron-scale inverted-pyramid patterning of silicon10.1063/1.4768689 ↗
17. Enhanced performance of solar cells with optimized surface recombination and efficient photon capturing via anisotropic-etching of black silicon10.1063/1.4878096 ↗
18. Large-scale black multi-crystalline silicon solar cell with conversion efficiency over 18%10.1007/s00339-014-8414-3 ↗
19. 18.45%-efficient multi-crystalline silicon solar cells with novel nanoscale pseudo-pyramid texture10.1002/adfm.201401589 ↗
20. Numerical simulation of bowing phenomenon in ultra-thin crystalline silicon solar cells10.1016/j.solener.2014.04.027 ↗
21. High efficiency hybrid PEDOT:PSS/nanostructured silicon Schottky junction solar cells by doping-free rear contact10.1039/C4EE02282C ↗
22. Realization of 13.6% efficiency on 20μm thick Si/organic hybrid heterojunction solar cells via advanced nanotexturing and surface recombination suppression10.1021/acsnano.5b02432 ↗
23. High efficiency hybrid silicon nanopillar-polymer solar cells10.1021/am402598j ↗
24. Hybrid heterojunction solar cell based on organic-inorganic silicon nanowire array architecture10.1021/ja205703c ↗
25. Ultrathin, flexible organic-inorganic hybrid solar cells based on silicon nanowires and PEDOT:PSS10.1021/am500063w ↗
26. Hybrid organic-inorganic heterojunction solar cells with 12% efficiency by utilizing flexible film-silicon with a hierarchical surface10.1039/c3nr06323b ↗
27. Improvement of the SiOx passivation layer for high-efficiency Si/PEDOT:PSS heterojunction solar cells10.1021/am503949g ↗
28. An 18.2%-efficient black-silicon solar cell achieved through control of carrier recombination in nanostructures10.1038/nnano.2012.166 ↗
29. Optical reflectance and transmission of a textured surface10.1016/0040-6090(77)90197-3 ↗
30. Large-area free-standing ultrathin single-crystal silicon as processable materials10.1021/nl402230v ↗
31. Titanium dioxide/silicon hole-blocking selective contact to enable double-heterojunction crystalline silicon-based solar cell10.1063/1.4916540 ↗
32. Resistance of solid surfaces to wetting by water10.1021/ie50320a024 ↗
33. ChemInform abstract: preparation of transparent superhydrophobic boehmite and silica films by sublimation of aluminum acetylacetonate10.1002/chin.200001251 ↗