journal article·2014-04

Correlation of intramolecular charge transfer and orientation properties among quinacridone and acceptor units

Ho Jun Song, Doo Hun Kim, Eui Jin Lee, Jung Rim Haw, Doo Kyung Moon

Publisher page

Abstract

Abstract This study synthesized a highly soluble quinacridone-acceptor series (PQCDTB, PQCDTQ-a, PQCDTQ-b) through the Suzuki coupling reaction by introducing planar quinacridone and a highly soluble acceptor unit. The polymers largely dissolved organic solvents, and the Mn ranged from 40.5 to 63.1 kg/mol. The intermolecular charge transfer (ICT) effects were much stronger in PQCDTQ-b than in PQCDTB and PQCDTQ due to the position of the oxygen atom. The HOMO and LUMO levels of the polymers were −5.18 to −5.37 eV and −3.28 to −3.40 eV, respectively. According to XRD measurements, PQCDTB exhibited the formation of an ordered lamellar structure and conventional edge-on π-stacking, whereas PQCDTQ-a and PQCDTQ-b exhibited face-on formation relative to the substrate. The open-circuit voltage (VOC), short-circuit current (JSC), fill factor (FF), and power conversion efficiency (PCE) were 0.85 V, 7.6 mA/cm2, 61.5%, and 4.0%, respectively, for PQCDTQ-a with a 1:2 ratio of PC71BM.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Organic Light-Emitting Diodes Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. Electroluminescence in conjugated polymers10.1038/16393 ↗
2. Highly efficient blue electroluminescence from poly(phenylene ethynylene) via energy transfer from a hole-transport matrix10.1002/adma.200500185 ↗
3. Synthesis and electroluminescence properties of fluorene–anthracene based copolymers for blue and white emitting diodes10.1016/j.jiec.2011.02.038 ↗
4. Polymer solar cell modules prepared using roll-to-roll methods: knife-over-edge coating, slot-die coating and screen printing10.1016/j.solmat.2008.12.012 ↗
5. Effects of side chains on thiazolothiazole-based copolymer semiconductors for high performance solar cells10.1002/aenm.201100215 ↗
6. Efficient donor-acceptor type polymer semiconductors with well-balanced energy levels and enhanced open circuit voltage properties for use in organic photovoltaics10.1039/c1jm12145f ↗
7. ITO-free flexible polymer solar cells: from small model devices to roll-to-roll processed large modules10.1016/j.orgel.2011.01.009 ↗
8. Consensus stability testing protocols for organic photovoltaic materials and devices10.1016/j.solmat.2011.01.036 ↗
9. Product integration of compact roll-to-roll processed polymer solar cell modules: methods and manufacture using flexographic printing, slot-die coating and rotary screen printing10.1039/c0jm01178a ↗
10. Conjugated donor−acceptor copolymer semiconductors with large intramolecular charge transfer: synthesis, optical properties, electrochemistry, and field effect carrier mobility of thienopyrazine-based copolymers10.1021/ma061861g ↗
11. Direct arylation polycondensation for the synthesis of bithiophene-based alternating copolymers10.1039/C2PY20917A ↗
12. Siloxane-terminated solubilizing side chains: bringing conjugated polymer backbones closer and boosting hole mobilities in thin-film transistors10.1021/ja209328m ↗
13. Biaxially extended thiophene-fused thiophene conjugated copolymers for high performance field effect transistors10.1021/ma202017q ↗
14. Crystalline low-band gap polymers comprising thiophene and 2,1,3-benzooxadiazole units for bulk heterojunction solar cells10.1021/ma201848z ↗
15. Aggregation properties of soluble quinacridones in two and three dimensions10.1021/cm011053y ↗
16. Stm study on 2d molecular assemblies of luminescent quinacridone derivatives: structure fine-tuned by introducing bulky substitutes and co-adsorption with monofunctional/bifunctional acid10.1021/la0624034 ↗
17. Quinacridone-based semiconducting polymers: implication of electronic structure and orientational order for charge transport property10.1021/cm300514z ↗
18. Conjugated polymer consisting of quinacridone and benzothiadiazole as donor materials for organic photovoltaics: coplanar property of polymer backbone10.1021/ma301466m ↗
19. Conjugated polymers consisting of quinacridone and quinoxaline as donor materials for organic photovoltaics: orientation and charge transfer properties of polymers formed by phenyl structures with a quinoxaline derivative10.1039/c3ta10512a ↗
20. Carbazole and thienyl benzo[1,2,5]thiadiazole based polymers with improved open circuit voltages and processability for application in solar cells10.1039/c1jm12089a ↗
21. Molecular energy level modulation by changing the position of electron-donating side groups10.1039/c2jm16474d ↗
22. Side-chain effect on cyclopentadithiophene/fluorobenzothiadiazole-based low band gap polymers and their applications for polymer solar cells10.1021/ma4009302 ↗
23. A new thiophene substituted isoindigo based copolymer for high performance ambipolar transistors10.1039/c2cc30169e ↗
24. Effects of solvent additive on inverted structure pcpdtbt:Pc71bm bulk heterojunction organic solar cells10.1002/pssa.201329195 ↗
25. A new donor–acceptor–donor polyfluorene copolymer with balanced electron and hole mobility10.1002/adfm.200700441 ↗
26. Side-chain architectures of 2,7-carbazole and quinoxaline-based polymers for efficient polymer solar cells10.1021/ma102783d ↗