journal article·2011-01

A new back surface passivation stack for thin crystalline silicon solar cells with screen-printed back contacts

Dae-Yong Lee, Hyun-Ho Lee, Jun Yong Ahn, Hyun Jung Park, Jong Hwan Kim, Hyung Jin Kwon, Ji-Weon Jeong

Publisher page

Abstract

Abstract In order to manufacture high-efficiency Si solar cells with a passivated rear surface and local contacts, it is necessary to develop both an excellent rear-passivation scheme compatible with screen-printing technology and a robust patterning technique for local contact formation. In this work, we have fabricated Si solar cells on ∼130 μm thick substrates using manufacturable processing, where rear side was passivated with a plasma-enhanced chemical vapor deposited SiOx/SiNx/SiOxNy stack and local back contacts using laser. As a result of both the rear surface passivation stack and the laser-fired local contacts, cell efficiencies of up to 17.6% on a 148.6 cm2 Float-zone Si wafer and 17.2% for a 156.8 cm2 multicrystalline Si wafer were achieved. PC-1D calculations revealed that the cells had a back surface recombination velocity (BSRV) of ∼400 cm/s and a back surface reflectance (BSR) of over 90%, as opposed to standard full Al-BSF cells having a BSRV of ∼800 cm/s and a 70% BSR. This result clearly indicates that the new technique of the passivation scheme and the patterning using laser developed in this study are promising for manufacturing high-efficiency PERC-type thin Si solar cells.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Silicon Nanostructures and Photoluminescence

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. A. Schneider, C. Gerhards, F. Huster, W. Neu, M. Spiegel, P. Fath, E. Bucher, R.J.S. Young, A.G. Prince, J.A. Raby, A.F. Carroll, Al BSF thin screen printed multicrystalline Si solar cells, in: Proceedings of the 17th European Photovoltaic Solar Energy Conference, 22–26 October 2001, Munich, Germany, pp. 1768–1771.
2. Influence of wafer thickness on the performance of multicrystalline Si solar cells: an experimental study10.1002/pip.421 ↗
3. 22.8% efficient silicon solar cell10.1063/1.101596 ↗
4. Surface passivation of crystalline silicon solar cells: a review10.1002/1099-159X(200009/10)8:5<473::AID-PIP337>3.0.CO;2-D ↗
5. Goetzberger · 1998
6. A.G. Aberle, Crystalline Silicon Solar Cells: Advanced Surface Passivation and Analysis of Crystalline Silicon Solar Cells, Centre for photovoltaic Engineering, Sydney, Australia, 1999, pp. 146–178
7. 20.1% efficient crystalline silicon solar cell with amorphous silicon rear-surface passivation10.1002/pip.641 ↗
8. G. Agostinelli, P. Choulat, H.F.W. Dekkers, Y. Ma, G. Beaucarne, Silicon solar cells on ultra-thin substrates for large scale production, in: Proceedings of the 21st European Photovoltaic Solar Energy Conference, 4–8 September 2006, Dresden, Germany, pp. 601–604.
9. Y. Ma, G. Agostinelli, P. Choulat, H. Dekkers, X. Loozen, G. Beaucarne, 16.7% efficiency i-PERC solar cells on large area 130 micron thick multicrystalline silicon substrates, in: Proceedings of the 17th Photovoltaic Science and Engineering Conference, 3–7 December 2007, Fukuoka, Japan, pp. 422–423.
10. R. Preu, S.W. Glunz, S. Schaefer, R. Ludemann, W. Wettling, W. Pfleging, Laser ablation—A new low-cost approach for passivated rear contact formation in crystalline silicon solar cell technology, in: Proceedings of the 16th European Photovoltaic Solar Energy Conference, 1–5 May 2000, Glasgow, UK, pp. 1181–1184
11. A. Metz R. Hezel, High-quality passivated rear contact structure for silicon solar cells based on simple mechanical abrasion, in: Proceedings of the 28th IEEE Photovoltaic Specialist Conference, 15–22 September 2000, pp. 172–175.10.1109/PVSC.2000.915781 ↗
12. G. Agostinelli, J. Szlufcick, P. Choulat, G. Beaucarne, Local contact structures for industrial PERC-type solar cells, in: Proceedings of the 20th European Photovoltaic Solar Energy Conference, 6–10 June 2005, Barcelona, Spain, pp. 942–945.
13. Laser shaping of photonic materials: deep-ultraviolet and ultrafast lasers10.1016/S0169-4332(99)00463-8 ↗
14. E. Schneiderlőchner, A. Grohe, C. Ballif, S.W. Glunz, R. Preu, Investigations on laser-fired contacts for passivated rear solar cells, in: Proceedings of the 29th IEEE Photovoltaic Specialist Conference, 19–24 May 2002, New Orleans, LA, pp. 300–303.10.1109/PVSC.2002.1190518 ↗
15. R.A. Sinton, A. Cuevas, A quasi-steady-state open-circuit voltage method for solar cell characterization, in: Proceedings of the 16th European Photovoltaic Solar Energy Conference, 1–5 May 2000, Glasgow, UK, pp. 1152–1155.
16. Experimental evidence of parasitic shunting in silicon nitride rear surface passivated solar cells10.1002/pip.420 ↗
17. Atomic hydrogen-induced interface degradation of reoxidized-nitrided silicon dioxide on silicon10.1063/1.110990 ↗
18. M. Hofmann, S. Kambor, C. Schmidt, D. Grambole, J. Rentsch, S. Glunz, R. Preu, Firing stable surface passivation using all-PECVD stacks of SiOx:H and SiNx:H, in: Proceedings of the 22nd European Photovoltaic Solar Energy Conference, 3–7 September 2007, Milan, Italy, pp. 1030–1033.
19. Field-effect passivation of the SiO2–Si interface10.1063/1.370784 ↗
20. Dimensionless solution of the equation describing the effect of surface recombination on carrier decay in semiconductors10.1063/1.357521 ↗
21. M. Vichai, N. Kenta, K. Dong Seop, K. steve, S. Aziz, K. Armin, S. Werner, A. Rohatgi, Investigation of modified screen-printing Al pastes for local back surface field formation, in: Proceedings of the Fourth IEEE WCPEC, Waikoloa, Hawaii, 2006, pp. 1338–1337.10.1109/WCPEC.2006.279678 ↗
22. A.G. Aberle, S.R. Wenham, M.A. Green, New method for accurate measurement of the lumped series resistance of solar cells, in: Proceedings of the 23rd IEEE PVSC, 1993, pp. 133–139.10.1109/PVSC.1993.347065 ↗