Analysis of n-type IBC solar cells with diffused boron emitter locally blocked by implanted phosphorus
Source abstract
Abstract
Abstract Interdigitated back-contact (IBC) solar cells were fabricated with a process sequence combining local ion implantation of phosphorus and full area BBr 3 furnace diffusion resulting in conversion efficiencies of up to 22.4%. The highly doped emitter and BSF are in direct contact to each other ( p + n + junction) leading to a controlled junction breakdown at low reverse-bias voltages of around 5 V. The breakdown was located at the p + n + junction and found to be homogeneously distributed over the whole cell area. This is not critical for module integration as the absolute temperature rise of a reverse-biased cell was determined to be less than 35 K. After reverse breakdown, the conversion efficiency degraded by 1–2% absolute due to additional recombination at the p + n + junction. The cell performance could be fully recovered by a short annealing at 300 °C indicating that the Al 2 O 3 passivation was altered by the reverse breakdown. This might be a fundamental issue for Al 2 O 3 passivated IBC solar cells without gap between emitter and BSF, independent from the doping method.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Semiconductor materials and interfaces · Thin-Film Transistor Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. Achievement of more than 25% conversion efficiency with crystalline silicon heterojunction solar cell10.1109/JPHOTOV.2014.2352151 ↗
2. Toward the practical limits of silicon solar cells10.1109/JPHOTOV.2014.2350695 ↗
3. Development of heterojunction back contact Si solar cells10.1109/JPHOTOV.2014.2358377 ↗
4. Co-diffused back-contact back-junction silicon solar cells without gap regions10.1109/JPHOTOV.2013.2274382 ↗
5. Back-junction back-contact n-type silicon solar cell with diffused boron emitter locally blocked by implanted phosphorus10.1063/1.4895538 ↗
6. D. Kania, T.S. Böscke, M. Braun, P. Sadler, C. Schöllhorn, M. Dupke, D. Stichtenoth, A. Helbig, R. Carl, K. Meyer, A. Grohe, J. Lossen, H.-J. Krokoszinski, Pilot line production of industrial high-efficient bifacial n-type silicon solar cells with efficiencies exceeding 20.6%, in: Proceedings of the 28th European PV Solar Energy Conference, Paris, 2013, pp. 1383–1385.
7. Impact of implanted phosphorus on the diffusivity of boron in crystalline silicon10.1063/1.4926764 ↗
8. Buried emitter solar cell structures: decoupling of metallisation geometry and carrier collection geometry of back contacted solar cells10.1002/pssr.200802113 ↗
9. A. Halm, V.D. Mihailetchi, G. Galbiati, L.J. Koduvelikulathu, R. Roescu, C. Comparotto, R. Kopecek, K. Peter, J. Libal, The Zebra cell concept-large area n-type interdigitated back contact solar cells and one-cell modules fabricated using standard industrial processing equipment, in: Proceedings of the 27th European PV Solar Energy Conference, Frankfurt, 2012, pp. 567–570.
10. Characterization and modeling of screen-printed metal insulator semiconductor tunnel junctions for integrated bypass functionality in crystalline silicon solar cells10.1063/1.4807931 ↗
11. D.D. Smith, P.J. Cousins, A. Masad, S. Westerberg, M. Defensor, R. Ilaw, T. Dennis, N. Bergstrom, A. Leygo, X. Zhu, B. Meyers, B. Bourne, M. Shields, R. Doug, SunPower's Maxeon Gen III solar cell: high efficiency and energy yield, in: Proceedings of the 39th IEEE Photovoltaic Specialists Conference, Tampa, USA, 2013, pp. 908–913.10.1109/PVSC.2013.6744291 ↗
12. Improved performance thin solar cells10.1109/T-ED.1978.19363 ↗
13. A review and comparison of different methods to determine the series resistance of solar cells10.1016/j.solmat.2007.05.026 ↗
14. M. Hermle, F. Granek, O. Schultz-Wittmann, S.W. Glunz, Shading effects in back-junction back-contacted silicon solar cells, in: Proceedings of the 33rd IEEE Photovoltaic Specialists Conference, San Diego, USA, 2008.10.1109/PVSC.2008.4922761 ↗
15. Local series resistance imaging of silicon solar cells with complex current paths10.1109/JPHOTOV.2015.2397595 ↗
16. Ion implantation for all-alumina IBC solar cells with floating emitter10.1016/j.egypro.2014.08.078 ↗
17. Sze · 1981
18. Understanding junction breakdown in multicrystalline solar cells10.1063/1.3562200 ↗
19. K.R. McIntosh, P.P. Altermatt, G. Heiser, Depletion-region recombination in silicon solar cells: when does mDR=2? in: Proceedings of the 16th European PV Solar Energy Conference, Glasgow, 2000, pp. 251–254.
20. I. Geisemeyer, F. Fertig, W. Warta, S. Rein, M.C. Schubert, Fast hot spot evaluation, in: Proceedings of the 29th European PV Solar Energy Conference, Amsterdam, 2014, pp. 2429–2434.
21. D.D. Smith, P.J. Cousins, A. Masad, A. Waldhauer, S. Westerberg, M. Johnson, T. Xiuwen, T. Dennis, G. Harley, G. Solomon, R. Seung, M. Shepherd, S. Harrington, M. Defensor, A. Leygo, P. Tomada, W. Junbo, T. Pass, L. Ann, L. Smith, N. Bergstrom, C. Nicdao, P. Tipones, D. Vicente, Generation III high efficiency lower cost technology: transition to full scale manufacturing, in: Proceedings of the 38th IEEE Photovoltaic Specialists Conference, Austin, USA, 2012, pp. 1594–1597.10.1109/PVSC.2012.6317899 ↗
22. F. Fertig, S. Rein, M.C. Schubert, W. Warta, Impact of junction breakdown in multi-crystalline silicon solar cells on hot spot formation and module performance, in: Proceedings of the 26th European PV Solar Energy Conference, Hamburg, 2011, pp. 1168–1178.
23. Reaction kinetics during the thermal activation of the silicon surface passivation with atomic layer deposited Al2O310.1063/1.4865901 ↗
24. Excellent passivation of highly doped p-type Si surfaces by the negative-charge-dielectric Al2O310.1063/1.2784168 ↗