journal article·2015-09

Vertical phase separation and light-soaking effect improvements by photoactive layer spin coating initiation time control in air-processed inverted organic solar cells

II Jeon, Yutaka Matsuo

Publisher page

Abstract

Abstract Inverted type organic solar cells have been regarded more promising over normal type, owing to a favorable vertical phase separation and air-processability. Many techniques, such as thermal or solvent annealing, slow growth method, melting bi-layers etc. have been employed to improve the morphology of photoactive layer, which is one of the advantages of inverted type OSCs. As a result, the device performance is greatly enhanced which is also reflected in the current-density versus voltage curve. However, some of the methods presented above are difficult and costly to perform. In addition, inverted OSCs still employ certain metal oxide electron-transporting layers, which impose UV activation time due to light-soaking effect. Here we show a facile method that can control the vertical phase separation as well as minimize the light-soaking effect. By leaving the photoactive solution with a low volatile solvent in air before spin coating, conductive polymers (donor) and fullerene derivatives (acceptor) were separated vertically in a way that their charge extraction is enhanced. Besides, oxygen and impurities at the contact on ETL were removed by leaving the solution for a certain period. Mechanisms of these improvements were evidenced by various analytical techniques and empirical tests using different materials in different environments. We anticipate this finding can expedite the OSC research and its usage in all air-processed inverted OSCs.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. Understanding low bandgap polymer PTB7 and optimizing polymer solar cells based on it10.1002/adma.201400384 ↗
2. Tandem polymer solar cells featuring a spectrally matched low-bandgap polymer10.1038/nphoton.2011.356 ↗
3. Enhanced power-conversion efficiency in polymer solar cells using an inverted device structure10.1038/nphoton.2012.190 ↗
4. Inverted polymer solar cells with 8.4% efficiency by conjugated polyelectrolyte10.1039/c2ee22296e ↗
5. Efficient solution-processed small-molecule solar cells with inverted structure10.1002/adma.201300295 ↗
6. Dual plasmonic nanostructures for high performance inverted organic solar cells10.1002/adma.201200120 ↗
7. Interface investigation and engineering – achieving high performance polymer photovoltaic devices10.1039/b925382c ↗
8. Phase separation-driven stratification in conventional and inverted P3HT:PCBM organic solar cells10.1016/j.orgel.2013.02.020 ↗
9. A layered structure at the surface of P3HT/PCBM blends10.1039/c1cp20734b ↗
10. Morphology evolution via self-organization and lateral and vertical diffusion in polymer:fullerene solar cell blends10.1038/nmat2102 ↗
11. Enhanced hole mobility in regioregular polythiophene infiltrated in straight nanopores10.1002/adfm.200500364 ↗
12. Effects of annealing on the nanomorphology and performance of poly(alkylthiophene):fullerene bulk-heterojunction solar cells10.1002/adfm.200601038 ↗
13. Origin of the efficiency improvement in all-polymer solar cells upon annealing10.1063/1.2772185 ↗
14. Polymer photovoltaic cells: enhanced efficiencies via a network of internal donor–acceptor heterojunctions10.1126/science.270.5243.1789 ↗
15. 2.5% Efficient organic plastic solar cells10.1063/1.1345834 ↗
16. Device annealing effect in organic solar cells with blends of regioregular poly(3-hexylthiophene) and soluble fullerene
17. High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends10.1038/nmat1500 ↗
18. Polythiophene based bulk heterojunction solar cells: morphology and its implications10.1016/j.tsf.2005.12.031 ↗
19. Origin of the enhanced performance in poly(3-hexylthiophene):[6,6]-phenyl C61-butyric acid methyl ester solar cells upon slow drying of the active layer10.1063/1.2212058 ↗
20. Thermal diffusion processes in bulk heterojunction formation for poly-3-hexylthiophene/C60 single heterojunction photovoltaics
21. Efficiency limiting factors of organic bulk heterojunction solar cells identified by electrical impedance spectroscopy10.1016/j.solmat.2006.10.020 ↗
22. Transient photovoltaic behavior of air-stable, inverted organic solar cells with solution-processed electron transport layer10.1063/1.3099947 ↗
23. Electronic memory effects in diodes from a zinc oxide nanoparticle–polystyrene hybrid material10.1063/1.2345612 ↗
24. Dipole induced anomalous S-shape I–V curves in polymer solar cells10.1063/1.3117513 ↗
25. The effect of post-processing treatments on inflection points in current–voltage curves of roll-to-roll processed polymer photovoltaics10.1016/j.solmat.2010.06.007 ↗
26. A microscopic model for the behavior of nanostructured organic photovoltaic devices10.1063/1.2718865 ↗
27. Towards an understanding of light activation processes in titanium oxide based inverted organic solar cells10.1063/1.4764026 ↗
28. Overcoming the “light-soaking” issue in inverted organic solar cells by the use of Al:ZnO electron extraction layers10.1002/aenm.201300402 ↗
29. On the function of a bathocuproine buffer layer in organic photovoltaic cells10.1063/1.2362624 ↗
30. Optimisation of the interface “organic material/aluminium” of CuPc/C60 based photovoltaic cells10.1051/epjap:2007145 ↗
31. Effect of reduced selectivity of contacts on the current–potential characteristics and conversion performance of solar cells
32. Optimal negative electrodes for poly(3-hexylthiophene):[6,6]-phenyl C61-butyric acid methyl ester bulk heterojunction photovoltaic devices10.1063/1.2841067 ↗
33. Correlating reduced fill factor in polymer solar cells to contact effects10.1063/1.2841062 ↗
34. Factors limiting the efficiency of molecular photovoltaic devices10.1103/PhysRevB.69.035337 ↗
35. Addition of dihydromethano group to fullerenes to improve the performance of bulk heterojunction organic solar cells10.1002/adma.201302607 ↗
36. Inverted bulk-heterojunction organic solar cell using chemical bath deposited titanium oxide as electron collection layer10.1016/j.orgel.2010.04.008 ↗
37. Mixture of [60] and [70]PCBM giving morphological stability in organic solar cells10.1063/1.4818726 ↗
38. Mechanism of TiO2-assisted photocatalytic degradation of dyes under visible irradiation: photoelectro-catalytic study by TiO2-film electrodes10.1021/jp0540914 ↗
39. TiO2-assisted photodegradation of dyes. 9. Photooxidation of a squarylium cyanine dye in aqueous dispersions under visible light irradiation10.1021/es980923i ↗
40. An interfacial instability in a transient wetting layer leads to lateral phase separation in thin spin-cast polymer-blend films10.1038/nmat1476 ↗
41. Predicting vertical phase segregation in polymer-fullerene bulk heterojunction solar cells by free energy analysis10.1021/am4003777 ↗
42. Surface tension of liquid polysiloxanes having fluorinated alkyl side-chains10.1002/macp.1993.021940625 ↗
43. Effect of surface composition and roughness on the apparent surface free energy of silica aerogel materials10.1063/1.3635398 ↗
44. Vertical phase separation in bulk heterojunction solar cells formed by in situ polymerization of fulleride10.1038/srep05071 ↗
45. Yang · Nano Lett. · 2005 · 5 · 57910.1021/nl048120i ↗
46. XPS depth profiling studies of L-CVD SnO2 thin films10.1016/j.apsusc.2006.03.065 ↗
47. Study on the interaction between Ag and tris(8-hydroxyquinoline) aluminum using x-ray photoelectron spectroscopy10.1002/sia.1008 ↗
48. Vertical phase separation in poly(3-hexylthiophene): fullerene derivative blends and its advantage for inverted structure solar cells10.1002/adfm.200801286 ↗
49. High efficiency P3HT:PCBM solar cells with an inserted PCBM layer10.1039/c4tc00003j ↗
50. Photocurrent generation in polymer-fullerene bulk heterojunctions10.1103/PhysRevLett.93.216601 ↗
51. Space-charge limited photocurrent10.1103/PhysRevLett.94.126602 ↗